Panasonic Th 50pf30 Operating Instructions

When using the Wall-hanging bracket (vertical)
Note:
When using the Wall-hanging bracket (vertical) (TY-WK42PV20), use the holes  and  to secure the 
cables. If the clamper is used on the hole , the cables may be caught by the wall-hanging bracket.
11
1
2
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on 
both the left and right sides.
Connections
Speaker 
terminal (R)Speaker 
terminal (L) When connecting the speakers, be sure to use...

12
VIDEO and COMPONENT / RGB IN connection
,  Y ,  P B ,    P R OUT 
PR
P B 
Y 
AUDIO 
OUT  R L
VIDEO
OUT
AUDIO
OUT R L
Notes: 
•  Change the “COMPONENT/RGB-IN select” setting in the “SETUP” 
menu to “COMPONENT” (when COMPONENT signal connection) 
or “RGB” (when RGB signal connection). (see page 49)
•  Signals input to COMPONENT/RGB IN terminals correspond to 
SYNC ON G or SYNC ON Y.
RCA-BNC
Adapter plug RCA-BNC
Adapter plug
DVD Player VCR
Computer RGB Camcorder
Connections
Video equipment connection...

13
HDMI connection
DVI-D IN connection
[Pin assignments and signal names]
1931
4218
Note: 
Additional equipment and HDMI cable shown are not supplied with this set.
Pin No.Signal NamePin No.Signal Name
1T.M.D.S Data2+11T.M.D.S Clock 
Shield
2T.M.D.S Data2 
Shield12T.M.D.S Clock-
3T.M.D.S Data2-13CEC
4T.M.D.S Data1+14Reserved 
(N.C. on device)
5T.M.D.S Data1 
Shield
6T.M.D.S Data1-15SCL
7T.M.D.S Data0+16SDA
8T.M.D.S Data0 
Shield17DDC/CEC 
Ground
9T.M.D.S Data0-18+5V Power
10T.M.D.S Clock+19Hot Plug...

Conversion adapter 
(if necessary)
Mini D-sub 15p
RGB
PC cableStereo mini plug (M3) Audio
Connect a cable which matches
the audio output terminal on the computer.
(Male)(Female)
COMPUTER
14
PC Input Terminals connection
Notes:
•  With regard to the typical PC input signals that are described in the applicable input signals list (see page 68), adjustment 
values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight 
PC input signal types that...

6789
1 3 4 52
COMPUTER
RS-232C Straight cable
D-sub 9p(Male)
(Female)
15
Connections
SERIAL Terminals connection
Notes:
•  Use the RS-232C straight cable to connect the computer to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied with this set. The SERIAL terminal is used when the Plasma Display is controlled by a computer.
Note:  To use serial control for this unit, make sure to set the “CONTROL I/F SELECT” in the “NETWORK...

INPUT MENU ENTER/+/ VOL-/
16
Power Indicator
Remote Control Sensor
Power ON / OFF
Connecting the AC cord plug to the Plasma Display.
Connecting the plug to the Wall Outlet.
Note: 
When disconnecting the AC cord, be absolutely sure to 
disconnect the AC cord plug at the socket outlet  rst.
Press the Power switch on the Plasma Display to turn the 
set on: Power-On.
Power Indicator: Green
Press the  button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby) 
Press the...

English (UK) 
Deutsch 
Français 
 
Italiano 
 
Español 
 
ENGLISH (US) 
 
OSD LANGUAGE
SET  SELECT 
PRESENT TIME SETUP
PRESENT TIME OF DAY    MON  99:99
SET
PRESENT TIME OF DAY99:99DAYMON
PRESENT TIME SETUPPRESENT TIME OF DAY    MON  99:99
SET
PRESENT TIME OF DAY10:00DAYTUE
LANDSCAPE
PORTRAIT
DISPLAY ORIENTATION
17
When  rst switching on the unit
Following screen will be displayed when the unit is turned on for the  rst time.
Select the items with the remote control. Unit buttons are invalid....

INPUT MENU  ENTER/ + /  VOL - / 
INPUT MENU ENTER/+/ VOL-/
18
Selecting the input signal
Notes:
•  Selecting is also possible by pressing the INPUT button on the unit.
•  Outputs the sound as set in “Audio input select” in the Options menu.(see page 59)
•  Select to match the signals from the source connected to the component/RGB input terminals. (see page 49)
•  Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an 
extended period. The...

19
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen 
will switch. (see page 25)
INPUT button (Input signal selection)
(see page 18)
INPUT MENU ENTER/+/ VOL-/
Basic Controls
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF ....Indicator not illuminated (The unit will 
still consume some power as long as the 
power cord is still inserted into the wall 
outlet.)
• Standby  ........ Red
Orange (When “Slot power” is set to 
“On”. See page 56)...

20
Basic Controls
Standby (ON / OFF) button
The Plasma Display must   rst be plugged 
into the wall outlet and turned on at the 
power switch (see page 16).
Press this button to turn the Plasma 
Display On, from Standby mode. Press 
it again to turn the Plasma Display Off to 
Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect. 
(see page 21)
POS./SIZE button 
(see page 26)
PICTURE button 
(see page 29)
Sound mute On / Off 
Press this button to mute the sound....