Panasonic Th 42pf20 Operating Instructions

61
Unit Setup
Set each “Network Setup” setting and make sure to set the “Cont\
rol I/F Select” to “LAN”. (see page 52)
Computer Setup
Disable the proxy server settings and enable JavaScript. 
You can use a Web browser to control the unit and set up a network and password.
Access to the TOP screen of the Web browser control using a Web browser. To use the Web browser control, the unit and computer setups are required.
(Windows) (Macintosh)
Disable proxy server settings
1  Display [Internet Properties]...

62
Using Web Browser Control
TOP screen structure of the Web browser control
After logging in, the TOP screen of the Web browser control is displayed.
  Menu
Menu items are displayed. When a button is clicked, 
setup screen of each item is displayed.
Item Details
BASIC 
CONTROL BASIC CONTROL screen is displayed. 
(see below)
OPTION 
CONTROL OPTION CONTROL screen is 
displayed. (see below)
NETWORK 
SETTING Network Setup screen is displayed.
(see page 63)
CHANGE 
PASSWORD Password setup screen is...

63
Notes:
•  To use a DHCP server, make sure the DHCP server is started.
•   During a DHCP server is used, IP ADDRESS, 
SUBNET MASK, and GATEWAY values cannot be 
entered.
•   When the set values are changed properly, 
“NETWORK SETTING CHANGED.” message and 
the changed set items are displayed.
Item Details
DHCP Set to ON when a DHCP server is 
used, or OFF when it is not used.
IP ADDRESS Enter an IP address.
SUBNET MASK Enter a subnet mask.
GATEWAY Enter a gateway address.
PORT Enter the port number...

64
Troubleshooting
Before you call for service, determine the symptoms and make a few simpl\
e checks as shown below.
SymptomsChecks
Picture Sound
InterferenceNoisy Sound Electrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo SoundVolume
(Check whether the mute function has been activated on the remote contr\
ol.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
Picture and Brightness/Volume setting
(Check by pressing the power switch or stand-by button on the remote co\...

65
List of Aspect Modes
Aspect modePicture 
 Enlarged screen DescriptionAll Aspect: 
OnFactory setting
All Aspect: Off
16:9 16:9
The display of the pictures  fi lls the screen.
In the case of SD signals, pictures with a 4:3 aspect 
ratio are enlarged horizontally, and displayed. This 
mode is suited to displaying anamorphic pictures with 
a 16:9 aspect ratio.
14:9 14:9
Letterbox pictures with a 14:9 aspect ratio are enlarged 
vertically and horizontally so that their display  fi lls  the 
screen...

66
Applicable Input Signals
Signal nameHorizontal frequency 
(kHz)  Vertical frequency 
(Hz)  COMPONENT / 
RGB IN / PC IN
(Dot clock (MHz)) DVI-D IN
(Dot clock (MHz)) HDMI
1   525 (480) / 60i  15.73 59.94 *  (13.5) *  (27.0) *
2   525 (480) / 60p  31.47 59.94 *  (27.0)   
∗5 * (27.0) *
3   625 (575) / 50i  15.63 50.00 *  (13.5)
4   625 (576) / 50i  15.63 50.00 *  (27.0) *
5   625 (575) / 50p  31.25 50.00 *  (27.0)
6   625 (576) / 50p  31.25 50.00 *  (27.0) *
7   750 (720) / 60p  45.00 60.00 *  (74.25) *...

67
Shipping condition
Shipping
YESNO
Options
Shipping
[from the unit]
1    Press the MENU button till the Setup menu is displayed.
2    Press the Volume Up“+” or Down“–” button to select “OSD Language”\
.
3    Press and hold the ENTER button till the Shipping menu is displayed.
4    Press the Volume Up“+” or Down“–” button to select “YES”.
5    Press the ENTER button and wait for 10 sec.
This function allows you to reset the unit to the factory setting.
1
2
3
4Press to display the Setup menu.
Press to...

68
Command list of Weekly Command Timer
No. Command Control details1 AAC:MENCLR Audio Menu (Clear)
2 AAC:MENDYN Audio Menu (Dynamic)
3 AAC:MENSTD Audio Menu (Standard)
4 AAC:SURMON Surround (ON)
5 AAC:SUROFF Surround (OFF)
6 AMT:0 Audio Mute (OFF)
7 AMT:1 Audio Mute (ON)
8 ASO:M Audio out when PIP mode (Main Picture) 
9 ASO:S Audio out when PIP mode (Sub Picture) 
10 AVL:00 Audio Volume (00) 11 AVL:10 Audio Volume (10)
12 AVL:20 Audio Volume (20)
13 AVL:30 Audio Volume (30)
14 AVL:40 Audio Volume (40)...

69
Specifi cations
TH-42PF20E TH-50PF20E
Power Source  220 - 240  V AC, 50/60 Hz
Power Consumption Power on 375 W 445 W
Stand-by condition Save off 1.1 W, Save on 0.6 W Save off 1.1 W, Save on 0.6 W
Power off condition 0.3 W 0.3 W
Plasma Display panel Drive method : AC type
42-inch, 16:9 aspect ratio Drive method : AC type
50-inch, 16:9 aspect ratio
Screen size 921 mm (W) × 518 mm (H) 
× 1,057 mm (diagonal) 1,105 mm (W) × 622 mm (H) 
× 1,268 mm (diagonal)
(No.of pixels) 2,073,600 (1,920 (W) ×1,080 (H))...

Information for Users on Collection and Disposal of Old Equipment and us\
ed Batteries
These symbols on the products, packaging, and/or accompanying documents \
mean that used 
electrical and electronic products and batteries should not be mixed wit\
h general household waste. 
For proper treatment, recovery and recycling of old products and used ba\
tteries, please take them to 
applicable collection points, in accordance with your national legislati\
on and the Directives 
2002/96/EC and 2006/66/EC....