Panasonic Th 42pf20 Operating Instructions

H-Freq.
V- F r e q .kHz
Hz63.98
60.02
Signal Format
1280×1024/60
Sync
Signal [ 
RGB  ] 
Cinema realityXGA Mode Auto
Off
Auto
H-Freq.
Dot Clock Freq. kHz
MHz63.98
108.0
V-Freq. Hz
60.02
Signal Format1280×1024/60
51
This function operates only during input from PC IN terminal.
Select Signal from the “Setup” menu during RGB or Component input \
signal.
Setting RGB sync signal
Con
fi rm that the input is set to RGB input (this setting is valid only for R\
GB input signal).
Auto: 
The H and V sync or...

MULTI DISPLAY SetupSet up TIMER
PRESENT TIME Setup
Network Setup
Display orientation Landscape
MULTI PIP Setup
Portrait Setup
2/2
Setup
--:--:--:--:--:--
DHCP
Network Setup
Save
0
192.168.    0.    8
255.255.255.    0 192.168.    0.    1
1024
Auto
RS-232C Off
Subnet mask
LAN Speed Gateway IP address
Port
Control I/F Select Network ID
MAC address
52
Network Setup
Make the various settings to use the network function.
  
DHCP, IP address, Subnet mask, and Gateway settings
1 Set DHCP.
    When “Off” is...

Options 
Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 
2/3  
Options 
Weekly Command Timer Audio input select
1/3  
Initial input Onscreen displayOn
Off
Off Off
0
0Maximum VOL level
Initial VOL levelOffInput lockOffButton lockOffRemocon User level
3/3 Options 
O 
f f 
Off
Off
Clock Display
Rotate
Off
All AspectManual
Auto Setup Slot power 
Off
Power On Screen Delay
53
Options Adjustments
Item Adjustments...

54
Options Adjustments
Item Adjustments
Input lockLocks the input switch operation.
Off 
 PC  SLOT INPUT*1  VIDEO  COMPONENT*2  HDMI  DVI
*1   “SLOT INPUT” is displayed when an optional Terminal Board is installed.
   When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” 
are displayed.
*2  “ COMPONENT” may be displayed as “RGB” depending on the setting o\
f “Component/RGB-in select”. 
(see page 47)
Notes:
• Only the adjusted signal is displayed (see page 15).
•...

55
Options Adjustments
Item Adjustments
Studio W/BOff:
  Nullify all the settings adjusted.
On:   Sets the colour temperature for TV studio.
Note:  Valid only when the “Warm” is set as “White balance” in Picture menu.
Studio Gain Sharpens the contrast for a better view when a part of the image is too \
light to see.
Off:
  Disables “Studio Gain”.
On:   Enables “Studio Gain”.
Note:   This setting is valid only when the input signals are as follows:
        Component Video, RGB (analog), SDI, HDMI
Slot...

Weekly Command Timer 
Program1MondayOnFunction
Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
yProgram3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
8:00 
10:30 0102
1/8
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12  PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Weekly Command Timer 
20:00 
20:30 57 
58 
8/8   
22:00 59 --:-- 60 --:-- 
--:-- 61 --:-- 62 --:--  AVL:00 
DAM:NORM 
POF 
---...

Weekly Command Timer 
0210:30 Command No Time IMS:SL1 Command 
1Program
Weekly Command Timer 
Command 
02Command No 
IMS:SL1 10:30 Time 
1Program
57
Options Adjustments
Press to select Command No.
Press to select a command number.6
Press to select Time / Command.
Press to set each item.
Time:  Set the time to execute a command program.
      Pressing “
” or “” button once changes “Time” 1 
minute.
     Pressing “
” or “” button continuously changes “Time” by 15 minutes.
Command:   Select a command to...

58
Options Adjustments
Set up the sound when an image input is selected.
Image input  Audio input
[SLOT INPUT]*1  SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO
[VIDEO]  SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO
[COMPONENT]*2  SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO
[HDMI]  SLOT INPUT / VIDEO / COMPONENT / HDMI / DVI / PC / NO AUDIO
[DVI]  SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO
[PC]  SLOT INPUT / VIDEO / COMPONENT / DVI / PC / NO AUDIO NO AUDIO: No audio input...

59
Using Network Function
This unit has a network function to control the network connected displa\
y with your computer.
Note:
To use the network function, set each “Network Setup” setting and m\
ake sure to set the “Control I/F Select” to “LAN”. 
(see page 52)
When “LAN” is set, the slot power is turned on, and power indicato\
r is lit orange under the condition of power “Off” 
with remote control (stand-by state), regardless of the “Slot power\
” setting. (see page 55)
Example of Network Connection...

60
Using Network Function
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and yo\
u can operate the following actions from your 
computer using PJLink™ protocol. 
• Display  setup
• Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the t\
able below.
PJLink™ security authentication
Set “Panasonic” for the PJLink™ password.
• PJLink™ is a pending trademark in Japan, the United States, and other\
 countries or areas....