Panasonic Th 32lhd7uy Operating Instructions

							21
MULTI
PIPMULTI
PIPMULTI
PIP
ABABAB
BABABA
PC1
VIDEO2SELECT
SWAPSWAPSWAP
PC1
VIDEO2
VIDEO2
VIDEO1PC1
VIDEO2
A
A
A
CB
B
B
D
MULTI PIP
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed 
as follows bellow.
Press to swap main 
picture and sub picture.
Press to select the input mode.
Under main Picture and sub picture display, select 
the picture which you would like to change input 
modes.
Press to move the sub picture.
Each time the location of the sub picture will be moved.
Notes:
• This button is effective only in the picture in picture.  
• The sub picture may be hidden by the on screen display, depending on its position.
Notes:
•  Sound output is from the main picture.
•  In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•  The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the 
pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed 
on the main picture and depending on the 2-picture display mode.
•  Due to the small dimensions of the sub pictures used for the picture in picture and picture out picture displays, these sub 
pictures cannot be shown in detail.
•  Two computer screen pictures are displayed in a simplifi ed format, and it may not be possible to discern details on them 
satisfactorily.Press to change input signal.
[Picture out Picture]
Main picture Sub picture[Picture and Picture] [Picture in Picture]
[Example]
Input modes switching is possible Main picture label is bright Sub picture label is bright
Picture is changed Main picture label is changed Sub picture label is changedMain picture Sub picture Main picture Sub picture
Normal
Viewing
MULTI
PIP
SWAP
SELECT
ZOOM
MOVE
INPUT
SURROUND
VOL
NR
PICTURE
SOUNDSET UPINPUT
MULTI
PIPSWAP SELECT MOVE
ZOOM
 
						

							22
2/2
ADVANCED SETTINGS COLOR TEMP
COLOR MANAGEMENTNORMAL
OFF
ON
PICTURE
1/2
25
0
0
0
320
PICTURE
NORMALNORMALIZESTANDARD
BRIGHTNESS
SHARPNESS PICTURE MENU
COLOR PICTURE BACK LIGHT
TINT
Press to select  “ON”.
Press the left    or right     button to switch between modes.
AUTO
Automatically selects the mode that best suits the 
brightness of the environment.
STANDARD
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of BRIGHTNESS 
and PICTURE.
DYNAMIC
For viewing in brighter environments.
This menu selects higher than normal levels of 
BRIGHTNESS and PICTURE.
CINEMA
Ideal for movies.
Note:
If you would like to change the picture and color of the selected 
PICTURE menu to something else, adjust using the items in 
the PICTURE menu. (see next page)
PICTURE Adjustments
1
2
ADVANCED SETTINGS ON
Enables fine picture adjustment at a 
professional level (see next page).
ADVANCED SETTINGS OFF
Displays images with settings of the  
PICTURE menu.Press to enter 
Advanced Settings.
0
0
0
0
0
0
2.2 W/B LOW B BLACK EXTENSION
W/B HIGH B
W/B LOW R
AGC GAMMA INPUT LEVEL
W/B HIGH R
ADVANCED SETTINGS
NORMALNORMALIZE
OFF
COLOR MANAGEMENT ON
Enables vivid color adjustment automatically. Press the left   or right  
 
   button to switch between modes.
While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION 
( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint ( 
N
 
 / NORMALIZE 
 Normalization)
AUTO STANDARD
CINEMA DYNAMIC
NORMAL COOL WARM
Press to display the PICTURE menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind 
the menu. Select to adjust each item.
PICTURE
MULTI
PIPSWAP SELECT MOVEZOOM
SURROUND
VOL
NR
SOUNDSET UP
ASPECT PICTURE
POS. /SIZEINPUT
PICTURE
 
						

							23
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” and “TINT” settings cannot be 
adjusted for “RGB/PC” and “DVI” input 
signal.
•  You can change the level of each function 
(BACK LIGHT, PICTURE, BRIGHTNESS, 
COLOR, TINT, SHARPNESS) for each 
PICTURE MENU.
• The setting details for STANDARD, 
DYNAMIC and CINEMA respectively 
are memorized separately for each input 
mode  (INPUT1, INPUT2 and PC IN).
• The “TINT” setting can be adjusted 
for NTSC signal only during “VIDEO 
(S VIDEO)” input signal.
On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at 
any time or the ACTION (  ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the 
factory settings.
Helpful Hint ( 
N
   / NORMALIZE 
 Normalization)
Item Effect Adjustments
BACK LIGHT
Darker Brighter
Luminance of the back light is 
adjusted.
PICTURE
Less MoreAdjusts the proper picture contrast.
BRIGHTNESSDarker Brighter
Adjusts for easier viewing of dark 
pictures such as night scenes and 
black hair.
COLOR
Less MoreAdjusts color saturation.
TINT
Reddish GreenishAdjusts for natural fl esh tones.
SHARPNESSLess MoreAdjusts picture sharpness.
Item Effect Details
BLACK
EXTENSION
Less MoreAdjusts the dark shades of the image in gradation.
INPUT 
LEVEL
Less More
Adjustment of parts which are extremely bright and hard to see.
(This cannot be adjusted when the input signal is DVI.)
W/B HIGH R
Less MoreAdjusts the white balance for light red areas.
W/B HIGH B
Less MoreAdjusts the white balance for light blue areas.
W/B LOW R
Less MoreAdjusts the white balance for dark red areas.
W/B LOW B
Less MoreAdjusts the white balance for dark blue areas.
GAMMA
Down UpS CURVE      2.0      2.2      2.5
AGC
OFF ONIncreases the brightness of dark signal automatically.
Notes:
•  Carry out “W/B” adjustment as follows.
1. Adjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings.
2. Adjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings.
3. Repeat steps 1 and 2 to adjust.
 Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
•  The adjustment values are memorized separately for each input mode (INPUT1, INPUT2 and PC IN).
•  The adjustment range values should be used as an adjustment reference.
 
						

							24
0
0
0
SOUND
NORMALNORMALIZESTANDARD
OFF TREBLE AUDIO MENU
BALANCEBASS
SURROUND
SOUND Adjustment
MUTE
BASS
Adjusts low sounds
TREBLE
Adjusts high sounds
BALANCE
Adjusts left and right volumes
SURROUND
Select ON or OFF 
Notes:
•  Press the SURROUND button to directly turn the surround effect ON and OFF. (see page 15)
•  BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU (STANDARD, AUTO).
1
Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
2Select to adjust each item.
Emits the original sound.
Automatically controls 
proper volume level.
Useful when answering the phone or receiving unexpected visitors.
Press this button to mute the sound.
Press again to reactivate sound. Sound is also reactivated when power is turned off or 
volume level is changed. While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION 
( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint ( 
N
 
 / NORMALIZE 
 Normalization)
SOUND
DISPLAY
NR
INPUT
VOL
PICTURE
SOUNDSET UP
ASPECT PICTURE
POS. /SIZE
OFF TIMER
PC
MULTI
PIPSWAP SELECTMOVE
SURROUND
ZOOM
STANDARD
AUTO
 
						

							25
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following operation state:
  “Multi-viewer” (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 21)
•  While Digital Zoom is in operation, “Adjusting PICTURE POSITION/SIZE” cannot be used.
•  The Digital Zoom capability is functional for the following component signals:
  525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i 
•  The Digital Zoom capability is functional for the following composite signals:
  NTSC, PAL, SECAMSelect the magnifi cation required for the enlarged display.
Each time this is pressed, the magnifi cation factor changes.
This is shown in the image being displayed.
3 2
4
The cursor will move.
EXIT
2
EXIT
1
1Display the “Operation Guide”.
Press to access Digital Zoom.
The “Operation Guide” will be displayed.
SURROUND button
MUTE button
VOL button
OFF TIMER button  During Digital Zoom, only the following buttons can be operated.
[Remote control]
VOL button [Unit]
ZOOM
MOVE
MULTI
PIPSWAP SELECT MOVEZOOM
NR
SOUNDINPUT
VOL
PICTURE SET UP
ASPECT PICTURE
POS. /SIZE
PCSURROUND
OFF TIMER
INPUT MENU ENTER/+/ VOL-/
R
× 1× 2× 3× 4
 
						

							26
PRESENT TIME SETUP / SET UP TIMER
PRESENT TIME SETUP
The timer can switch the LCD Display ON or OFF.
Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. 
Then set POWER ON TIME / POWER OFF TIME.
Press to display the SET UP menu.
Press to select  SET UP TIMER or 
PRESENT TIME SETUP.
Press to display the SET UP TIMER screen or 
PRESENT TIME SETUP screen.
Display the PRESENT TIME SETUP screen.
To set up PRESENT TIME OF DAY, follow the procedure described below.
Press to select PRESENT TIME OF DAY.
Press to set up PRESENT TIME OF DAY.
   button: Forward
   button: Back
Notes:
• Pressing “  ” or “  ” button once changes PRESENT TIME OF DAY 1minute.
• Pressing “  ” or “  ” button continuously changes PRESENT TIME OF DAY by 15 minutes.
Press to select Set.
Press to store PRESENT TIME SETUP.
Note:
Set cannot be selected unless PRESENT TIME OF DAY is set. 
Press to exit from PRESENT TIME SETUP.
1
2
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
2/2SET UP
SET UP TIMER
PRESENT TIME SETUP
1
2
99:99
PRESENT  TIME SETUP
PRESENT  TIME OF DAY    99:99
SET
PRESENT  TIME OF DAY
99:99
PRESENT  TIME SETUP
PRESENT  TIME OF DAY    99:99
SET
PRESENT  TIME OF DAY
3
SET UP
INPUT
SURROUND
VOL
N
PICTURE
SOUND
R
MULTI
SET UP
ZOOM
SET UP
 
						

							27
PRESENT TIME SETUP / SET UP TIMER
SET UP TIMER
Press to select 
POWER ON TIME / POWER OFF TIME.
Press to set up POWER ON TIME / POWER OFF 
TIME.
   button: Forward
   button: Back
Notes:
• Pressing “  ” or “  ” button once changes POWER ON TIME / POWER OFF TIME 
1minute.
• Pressing “  ” or “  ” button continuously changes POWER ON TIME / POWER OFF 
TIME by 15 minutes.
 
Press to select POWER ON FUNCTION 
/ POWER OFF FUNCTION. 
Press to select ON.
Press twice to exit from SET UP.
Note: 
Timer function will not work unless “PRESENT TIME OF DAY” is set. Display the SET UP TIMER SCREEN.1
2
3
0:00
0:00
SET UP TIMER
POWER OFF FUNCTION
POWER OFF TIME POWER ON TIME POWER ON FUNCTION
OFF
OFF PRESENT  TIME OF DAY    99:99
0:00
0:00
SET UP TIMER
POWER OFF FUNCTION
POWER OFF TIME POWER ON TIME POWER ON FUNCTION
OFF
OFF PRESENT  TIME OF DAY    99:99
R
 
						

							28
Reduces power consumption
Press to select 
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On  Off
Press to exit from SET UP. •  POWER  SAVE:  When this function is turned ON, luminous level of the LCD Display is suppressed, so power 
consumption is reduced.
• STANDBY SAVE:  When this function is turned ON, power consumption of the microcomputer is reduced 
during power supply standby (see page 13-15), so standby power of the set is reduced.
• POWER MANAGEMENT:  The unit power supply is turned ON or OFF depending on whether or not there is a signal 
during PC input mode. 
  This function is enabled when it is turned ON. (Only during input from PC(Mini D-sub) 
terminal)
• AUTO POWER OFF:  Equipment power supply is turned OFF when there is no signal.
  When this is set to On, the power supply of the unit goes Off 10 minutes after the input 
signals stop. 
  This function is effective for input signals except input from PC (Mini D-sub) terminal.
Press to select INPUT LABEL.
Press to change the INPUT LABEL.  
Customizing the Input labels
This function can change the label of the Input signal to be displayed.
Note:
While selecting a Input signal through Optional Terminal Board connected to Slot 1 and Slot 2, the Input label will depend 
on each Optional Terminal Board.
INPUT LABELS for Slot 1, Slot 2 and miniD-sub:
[Slot1 Input]  INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1
[Slot2 Input]  INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2
[PC (MiniD-sub) input]  PC/COMPONENT/RGB/DVD/STB Note:
“POWER MANAGEMENT” and “AUTO POWER OFF” are effective during normal viewing (one picture screen) only.
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
1
2
3
SET UP
 
						

							29
SET UP for Input Signals
3D Y/C FILTER  – For NTSC AV images
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y,  P
B, PR signals   “COMPONENT”
R, G, B, HD, VD signals   “RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN 
SELECT”.
Press to select the desired mode.
COMPONENT  RGB
Press to exit from adjust mode.
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.
(“SIGNAL [VIDEO]” menu is displayed.)
Note:
When ON, this setting only affects NTSC input signals. Note:
Selection may not be possible, depending on which optional board is installed.
1
2
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3)OFF
NORMAL
[ 
VIDEO ]
VIDEO NR
OFF
3
1
2
Press ACTION  (  ) button Press to select the “3D Y/C FILTER (NTSC)”.
Press to set ON / OFF.
Press to exit from adjust mode.
SET UP
R
R
INPUT
SURROUND
VOL
NR
PICTURE
SOUNDSET UP
MULTI
PIPSWAP SELECT MOVEZOOM
 
						

							30
3:2  PULLDOWN / VIDEO NR COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or “Panasonic 
AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low 
level or noisy input signals the image may in rare 
cases become unstable. Should this occur, set the 
system to match the format of the input signal.
Press to select 3:2 PULLDOWN 
or VIDEO NR.
Press to set ON/OFF.
Press to exit from adjust mode. 3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie 
pictures, which are recorded at 24 frames per second.
  If the picture is not stable, turn the setting to OFF.
Note:
When ON, this setting only affects the following signal input:
•  NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.
•  525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.
VIDEO NR: Automatically reduces unwanted picture noise.
Note: 
VIDEO NR cannot be adjusted while a PC signal is being applied.
1
2
Press ACTION  (  ) button
Mode Function
COLOR SYSTEMSet the color system to match the input signal. If set to “AUTO”, the color system is determined 
automatically.
AUTO SECAM M.NTSC NTSCPA L
Panasonic AUTO 
(4:3)Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is 
selected. If you would like to view 4:3 images in Just format, set to “JUST”.
R
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3)OFF
NORMAL
[ 
VIDEO ]
VIDEO NR
OFF
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3)OFF
NORMAL
[ 
VIDEO ]
VIDEO NR
OFF
SYNC
VIDEO NR
SIGNAL
AUTO
H-FREQ.
V-FREQ.kHz
Hz33.8
60.0
[ 
RGB ]
3 : 2 PULLDOWNOFF
OFF
3 : 2 PULLDOWN
VIDEO NR
SIGNAL
OFF
OFF
 [ 
COMPONENT ]
3 : 2 PULLDOWN
VIDEO NR
SIGNAL
OFF
OFF
H-FREQ.
V-FREQ.kHz
Hz33.8
60.0
[ 
Digital ]
Press ACTION  (  ) button