Panasonic Th 32lhd7uy Operating Instructions

21
MULTI
PIPMULTI
PIPMULTI
PIP
ABABAB
BABABA
PC1
VIDEO2SELECT
SWAPSWAPSWAP
PC1
VIDEO2
VIDEO2
VIDEO1PC1
VIDEO2
A
A
A
CB
B
B
D
MULTI PIP
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed 
as follows bellow.
Press to swap main 
picture and sub picture.
Press to select the input mode.
Under main Picture and sub picture display, select 
the picture which you would like to change input 
modes.
Press to move the sub picture.
Each time the location of the sub picture...

22
2/2
ADVANCED SETTINGS COLOR TEMP
COLOR MANAGEMENTNORMAL
OFF
ON
PICTURE
1/2
25
0
0
0
320
PICTURE
NORMALNORMALIZESTANDARD
BRIGHTNESS
SHARPNESS PICTURE MENU
COLOR PICTURE BACK LIGHT
TINT
Press to select  “ON”.
Press the left    or right     button to switch between modes.
AUTO
Automatically selects the mode that best suits the 
brightness of the environment.
STANDARD
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of BRIGHTNESS 
and PICTURE.
DYNAMIC
For...

23
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” and “TINT” settings cannot be 
adjusted for “RGB/PC” and “DVI” input 
signal.
•  You can change the level of each function 
(BACK LIGHT, PICTURE, BRIGHTNESS, 
COLOR, TINT, SHARPNESS) for each 
PICTURE MENU.
• The setting details for STANDARD, 
DYNAMIC and CINEMA respectively 
are memorized separately for each input 
mode  (INPUT1, INPUT2 and PC IN).
• The “TINT” setting can be adjusted 
for NTSC signal only during “VIDEO 
(S VIDEO)” input...

24
0
0
0
SOUND
NORMALNORMALIZESTANDARD
OFF TREBLE AUDIO MENU
BALANCEBASS
SURROUND
SOUND Adjustment
MUTE
BASS
Adjusts low sounds
TREBLE
Adjusts high sounds
BALANCE
Adjusts left and right volumes
SURROUND
Select ON or OFF 
Notes:
•  Press the SURROUND button to directly turn the surround effect ON and OFF. (see page 15)
•  BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU (STANDARD, AUTO).
1
Press to display the SOUND menu.
Press to select the menu to adjust.
Select the...

25
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following operation state:
  “Multi-viewer” (Picture in Picture, Picture out Picture, Picture...

26
PRESENT TIME SETUP / SET UP TIMER
PRESENT TIME SETUP
The timer can switch the LCD Display ON or OFF.
Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. 
Then set POWER ON TIME / POWER OFF TIME.
Press to display the SET UP menu.
Press to select  SET UP TIMER or 
PRESENT TIME SETUP.
Press to display the SET UP TIMER screen or 
PRESENT TIME SETUP screen.
Display the PRESENT TIME SETUP screen.
To set up PRESENT TIME OF DAY, follow the procedure described below.
Press to...

27
PRESENT TIME SETUP / SET UP TIMER
SET UP TIMER
Press to select 
POWER ON TIME / POWER OFF TIME.
Press to set up POWER ON TIME / POWER OFF 
TIME.
   button: Forward
   button: Back
Notes:
• Pressing “  ” or “  ” button once changes POWER ON TIME / POWER OFF TIME 
1minute.
• Pressing “  ” or “  ” button continuously changes POWER ON TIME / POWER OFF 
TIME by 15 minutes.
 
Press to select POWER ON FUNCTION 
/ POWER OFF FUNCTION. 
Press to select ON.
Press twice to exit from SET UP.
Note: 
Timer function...

28
Reduces power consumption
Press to select 
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On  Off
Press to exit from SET UP. •  POWER  SAVE:  When this function is turned ON, luminous level of the LCD Display is suppressed, so power 
consumption is reduced.
• STANDBY SAVE:  When this function is turned ON, power consumption of the microcomputer is reduced 
during power supply standby (see page 13-15), so standby power of the set is reduced.
• POWER...

29
SET UP for Input Signals
3D Y/C FILTER  – For NTSC AV images
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y,  P
B, PR signals   “COMPONENT”
R, G, B, HD, VD signals   “RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN 
SELECT”.
Press to select the desired mode.
COMPONENT  RGB
Press to exit from adjust mode.
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.
(“SIGNAL...

30
3:2  PULLDOWN / VIDEO NR COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or “Panasonic 
AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low 
level or noisy input signals the image may in rare 
cases become unstable. Should this occur, set the 
system to match the format of the...