Panasonic Sv Av50 Operating Instructions Manual

11
Charging the Batter y
Be sure to turn the power switch on the camera off 
when charging the battery.
1Slide and open the Card/Battery Door.
2Insert the battery all the way.
≥Confirm the direction of the battery.
≥Be sure to insert the battery until fixed with the 
Battery Lock.
3Close and lock the Card/Battery Door 
while sliding it.
4Place the SD Video Camera on the USB 
Cradle.
5Connect the DC Input Lead to the [DC IN 
4.8V] socket on the USB Cradle.
6Connect the AC Adaptor to AC Main 
socket....

12
Inserting a Memor y Card
Be sure to turn the power off when inserting the card.
1Slide and open the Card/Battery Door.
2Hold the Memory Card placing the cut off 
corner 
1 at the front with the label 2 
facing up, and then insert it all the way 
until it clicks.
≥Turn off the SD Video Camera before inserting/
removing a Card.
≥Confirm the direction of the battery.
3Close and lock the Card/Battery Door 
while sliding it.
ªRemoving the Memory Card
1Slide and open the Card/Battery Door.
2Press the Card...

13
Using the LCD Monitor
During live recording the image can be viewed on the 
LCD monitor. The monitor also allows you to review 
previously recorded material.
1Open the LCD Monitor.
≥The lens appears in an opposite side of the LCD 
Monitor.
2Adjust the LCD Monitor angle according 
to the desired recording/playing angle.
1 : Use mainly when recording.
≥Position your finger on Grip A. When you 
put your finger on the upper position of the 
Grip, there are times when your finger may 
touch the lens
2 :...

14
ªAttaching the Lens Protection Sticker
1Attach the Lens Protection Sticker 1 to 
the front of this unit. (Attach the Lens 
Protection Sticker to the position of the 
line 2.)
≥Put the finger under the Lens Protection Sticker 
1.
ªUsing the Jog Ball
As the angle of the LCD monitor is changed, so too 
will the direction of movement using the Jog Ball.
A : Recording angle
B : Playing back angle
≥When you keep pressing the [MENU] Button for 
2 seconds or more in playback mode, the Jog Ball 
and the Zoom...

15
Tur ning the Power On
Select a desired mode from the mode selection screen 
on the LCD Monitor.
1Press the [Í] Button for 1 second or 
more.
≥The SD Video Camera is turned on and the 
Power/Card Access Lamp A is lit in red.
ªAuto power on mode
If you set the [Auto power on] to [On] in [Setup] on 
[MENU], the SD Video Camera is automatically turned 
on when LCD Monitor is opened.
≥When the battery is removed, the setting on the [Auto 
power on] is turned to [Off]. (The setting on the [Auto 
power on]...

16
Selecting Operation Modes
1
Set to [ ] 1 to select Record Mode.
Set to [ ] 
2 to select Play Mode.
2Press the [MODE] Button to select a 
Operation Mode.
≥Every time the [MODE] Button is pressed, the 
Operation Mode changes as follows.
≥
After several seconds, only icons are displayed. 3
ªAbout the Operation Modes
Seven operation modes are provided as follows.
≥Still picture (JPEG format still picture) record mode 
(l22)
≥Still picture (JPEG format still picture) play mode 
(l23)
≥Moving picture (MPEG4...

17
Using the Menu Screen
Allows the functions usable in the selected mode to be 
set from the menu.
1Select a desired mode. (l16)
2Press the [MENU] Button.
≥The menu in the selected mode is displayed.
3Roll the Jog Ball UP or DOWN to select a 
desired item.
4Press the Jog Ball.
5For selecting an item, roll the Jog Ball UP 
or DOWN to select a desired item and 
then LEFT or RIGHT to set the item. 1
For conducting an item, roll the Jog Ball 
UP or DOWN to select a desired item and 
then press the Jog Ball....

18
List of Menus
The menu screens used differ slightly from the actual 
menus. These are offered for simplified illustration 
purposes.
ªRecord Mode [ ]
1Still Picture Record Menu
Picture size [Picture size] (l22)
Picture quality [Quality] (l22)
Flash setting [Flash] (l22)
Display setup [Display setup] 1
Initial setup [Setup] 2
Return to the previous screen [BACK]
2MPEG4 Moving Picture Record Menu
Moving picture quality [MPEG4 mode] (l24)
Auto recording setup [Auto recording setup] 3 
(l41)
Display setup...

19
ªPlay Mode [ ]
1Still Picture Playback Menu
Card editing [Card editing] 1
P. Slide show [P. Slide show] (l37)
Display setup [Display setup] (l18)
Initial setup [Setup] 2
Return to the previous screen [BACK]
2MPEG4 Moving Picture Playback Menu
Playback size [Screen] (l25)
MPEG4 repeat [Repeat] (l25)
Card editing [Card editing] 1
Display setup [Display setup] (l18)
Initial setup [Setup] 2
Return to the previous screen [BACK]
3Voice Playback Menu
Card editing [Card editing] 1
Display setup [Display...

20
Setting Date and Time
At the time of purchase of the SD Video Camera, the 
date and time are not set ([PRESS MENU TO SET 
CLOCK] is displayed). First, set the date and time, 
then use the SD Video Camera.
1Set the Record/Play mode Switch to 
[]. 
2Press the [MENU] Button.
3Select [Setup] and press the Jog Ball.
4Select [Clock set] and press the Jog Ball.
5Select [Year] and roll the Jog Ball LEFT or 
RIGHT to set a desired value.
6In the same way, set [Month], [Day], 
[Hour], [Minute] to a desired...