Panasonic Software DP-3510/4510/6010 Operating Instructions

							Installing the PS Driver Security Utility
31
Printer Section
In order to utilize Department Codes,  Mailboxes or Secure Mailboxes, the appropriate information must be
input prior to installing the printer driver.
Use the PS Driver Security Utility to change the setting before adding the printer.
If you have already added the printer, delete it, change the setting using the PS Driver Security Utility, then
add the printer.
Mac OS 8.6/9.x/X
1Exit from all applications, then insert the Panasonic 
Printing System CD into the CD-ROM drive.
Double-click the CD icon on the desktop.
For OS 8.6/9.x: Browse to folder English > PS >       
Setup > Mac > Tools >
F o r O S  X           : Browse to folder E n g lish  > PS  >         
Setup > Mac > Tools > OSX_only
Copy PsSecure.sit to your hard disk.
Note:
If PsSecure.sit does not automatically 
decompress, install a suitable 
decompression utility.
2Double-click the PS Driver Security Utility icon to 
start.
Note:
Installation instructions
A .hqx .sit .sea file on a Macintosh, use 
StuffIt Deluxe or StuffIt Expander by Aladdin 
Systems (http://www.aladdinsys.com/) to 
access the files contents. StuffIt Expander 
is available as a freeware product. 
						

							32
Configuring the Printer Driver Settings
To change the printer settings, open the printer properties by performing the following steps.
Windows 98/Me
1
Click the Start button, select Settings, and then click 
Printers.
2
Right-click the desired printer icon in the Printers folder,
and select Properties in the popup menu.
The printer properties dialog box appears. 
						

							Configuring the Printer Driver Settings
33
Windows 98/Me
Printer Section
General Tab
1.Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an existing user will remain
unchanged even if the comment is modified later.
2.Separator page
This feature is not available on your machine.
3.  button
Prints a test page. This allows the user to verify if the printer is installed properly.
Print Test Page 
						

							Configuring the Printer Driver Settings
34
Windows 98/Me
Details Tab
1.Print to the following port
Displays either the port where the printer is connected or the path to the network printer.
To change the printing destination, either select the printing destination port from the list or enter the
network path here.
2. /   button
Adds/deletes new port or new network path.
3.Print using the following driver
Displays the type of the printer driver. Specify the printer being used or a printer model which can be
emulated with the printer being used.
4. button
Updates or modifies the printer driver.
5. /   button
Assigns a local port to the network connected printer or cancels a local port assigned to the network
printer.
6.Timeout settings - Not selected
Specify the amount of time (in seconds) allowed to elapse before the printer comes online. If the printer is
not online within this duration, an error message will be displayed.
Add Port...Delete Port...
New Driver...
Capture Printer Port...End Capture... 
						

							Configuring the Printer Driver Settings
35
Windows 98/Me
Printer Section
7.Timeout settings - Transmission retry
Specify the amount of time (in seconds) allowed to elapse before the printer is ready for printing. If the
printer is not ready for printing within this duration, an error message will be displayed.
Increase this value if a timeout error occurs when printing a large document.
8. button
Specify the method of sending (spool) documents from the program to the printer.
Spool Data Format
Select spool data type (RAW format). Specifying RAW format results in a longer time elapsing before an
application becomes operational after printing from it.
Enable bidirectional support
Be sure to check the check box for Enable bidirectional support when installing the status monitor.
Otherwise, status information reception may not function properly.
9. button
Modifies printer port settings.
Spool Settings...
Port Settings... 
						

							Configuring the Printer Driver Settings
36
Windows 98/Me
Sharing Tab (See Note 1)
1.Not Shared/Shared As
Select whether to display or share this printer with other computers.
2.Share Name
Specify the name of the shared printer. The displayed name can be used as it is or a new name may be
entered. The name specified here will be displayed when other users view information about the printer
on the network.
3.Comment
You can enter comments regarding a shared printer (such as the type of printer and the location where it
is installed). When other users view information about the printer on the network, the comment specified
here will be displayed.
4.Password
Specify a password required when other users will connect to this printer. 
Leave the box blank in order not to use any password.
NOTE1.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified. 
						

							Configuring the Printer Driver Settings
37
Windows 98/Me
Printer Section
Paper Tab
1.Paper size
Select a document size.
2.Orientation
Select the print orientation (Portrait/Landscape).
3.Paper control
Controls printer outputs and groups pages. 
Select Collate if you wish each set of multiple copies collated when you print them. Otherwise, each page
is printed in individual groups. 
The Duplex menu specifies whether and how the printer should print the document on both sides of the
paper.
4.Paper source
Specify where the paper you want to use is located in the device.  If you choose Auto Select Tray, the
printer driver will automatically select an appropriate tray according to the Paper Size selected.
5.Output bin
Specifies which output bin to use for your printed document. Some printer models have more than one
output bin you can use for sorting your documents.
6.Paper type
Specifies the type of paper medium to use, such as plain or thick.
7. button
Displays the Margins dialog box. Click this button to view the area of the page that is unavailable for
printing.
Margins... 
						

							Configuring the Printer Driver Settings
38
Windows 98/Me
8. button
Displays version and copyright information for this printer driver.
9. button
Displays the help window for this printer driver.
10. button
Sets the values of all options in the current dialog box to the default values specified in the PPD file.About...
Help
Restore Defaults 
						

							Configuring the Printer Driver Settings
39
Windows 98/Me
Printer Section
Graphics Tab
1.Resolution
Select the resolution you want for printing (300dpi/600dpi/1200dpi Enhanced).
2.Special
Prints a negative image and/or mirror image of your document. Click these options to view an example.
3.Paper handling
Specify the layout pattern for printing multiple documents on a single sheet of paper and whether page
borders are used.  Select these options to view an example.
4.Scaling
Specify an enlargement or reduction percentage when printing documents.  If enlargement/reduction can
be set within the application, indicate 100% here and specify the enlargement/reduction percentage in
the Print dialog box of the application.
Note: 
If the Resolution Tab is set to 600 dpi or 1200 dpi, the zoom ratio is changed depending on the paper
size.
Ledger : 25 - 400%
Legal : 25 - 400%
A3 : 25 - 400%
B4 : 25 - 400%
Others : 25 - 400%
5.Convert gray text/graphics to PostScript gray
This feature is not available on your machine.
6. button
Displays the help window for this printer driver.
7. button
Sets the values of all options in the current dialog box to the default values specified in the PPD file.
Help
Restore Defaults 
						

							Configuring the Printer Driver Settings
40
Windows 98/Me
Fonts Tab
1.Substitute printer fonts for TrueType fonts when applicable
Tells the driver to determine which PostScript fonts to substitute for TrueType fonts.
Instead of sending all TrueType fonts to your printer, this option substitutes a PostScript printer font for
the common TrueType fonts used in your document.
By default, common TrueType fonts are substituted with their PostScript look-alikes when printing, but
those with no PostScript look-alike font are sent to the printer in the format specified in the Send
TrueType Fonts As box of the Send Fonts As dialog box.
2.Do not use printer fonts
Disables using printer-resident fonts. Use this advanced option when you expect to send the PostScript
output to different printer models.
3.Add Euro Currency Symbol to PostScript Fonts
Adds the European currency symbol to most PostScript fonts.
4. button
Updates the list of PostScript fonts that have been downloaded to the printer so that the driver prints them
correctly.
5. button
Displays the Send Fonts As dialog box. Click this button to specify how to send TrueType or PostScript
fonts.
6. button
Displays the help window for this printer driver.
7. button
Sets the values of all options in the current dialog box to the default values specified in the PPD file.
Update Soft Fonts
Send Fonts As...
Help
Restore Defaults