Panasonic Software DP-3510/4510/6010 Operating Instructions

							Installing  th e LPR (Line Printer  Remote)  Service
21
Windows NT 4.0
Printer Section
3Click the   button to display the  Select 
Network Service  dialog box, and select  Microsoft 
TCP/IP Printing .
Click the   button.
4The  Windows NT Setup  dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type 
D:\i386  (where D: is your CD-ROM drive).
Click the   button.
5After the files have been copied into the Hard Drive 
of your PC, the display returns to the Network dialog 
box. Confirm that the Microsoft TCP/IP Printing 
service has been added to Network Services list.
Click the   button. Note:
If the OK button does not change into a 
Close button, Remove and reinstall the 
Microsoft TCP/IP Printing service.
6The  Network Settings Change  dialog box is 
displayed, click the   button to restart 
your computer now.
You have now completed the LPR Service 
installation.
Add...
OK
Continue
Close
Yes 
						

							Installing the LPR (Line Printer  Remote)  Service
22
Windows NT 4.0
7After your computer has rebooted, log on with an 
account with Administrator Priviledges, click the  Start 
button, select  Settings, and then click  Printers.
The  Printers  folder appears.
Right-click on the desired printer icon and select 
Properties  from the pop-up menu.
8The following step registers the LPR Port for network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
Select the Ports Tab and click the    
button.
9The  Printer Ports  dialog box appears.
Select  LPR Port  and click the   
button.
Add Port...
New Port 
						

							Installing  th e LPR (Line Printer  Remote)  Service
23
Windows NT 4.0
Printer Section
10The Add LPR compatible printer  dialog box 
appears.
Enter the IP Address of the printer in the upper field, 
and lp for the print queue name in the lower field.
Click the   button.
(Please wait while the wizard verifies the IP Address 
and connectivity to the network.
11The  Printer Ports  dialog box appears.
Click the   button.
12Select the printer port and click the   
button.
The printer properties dialog box closes and you 
have now configured the printer as a network printer.
OK
Close
OK 
						

							Installing the LPR (Line Printer  Remote)  Port
24
Logon using an account with administrator rights.
Windows 2000/XP
1Open the  Printers folder.
Right-click on the desired printer icon and select 
Properties  from the pop-up menu.
The printer properties dialog box appears.
2Select the  Ports Tab and click the    
button.
3Select  Standard TCP/IP Port  and click the 
 button.
Add Port...
New Port... 
						

							Installing  th e LPR (Line Printer  Remote)  Port
25
Windows 2000/XP
Printer Section
4Click the   button.
5Enter the IP Address and the Port Name and click 
the  button.
Note:
The Port Name is automatically entered by 
Windows 2000/XP. You may need to 
change it as required.
6Select  Custom  and click the   button.
Next
Next
Settings... 
						

							Installing the LPR (Line Printer  Remote)  Port
26
Windows 2000/XP
71. In the Protocol section, select  LPR.
2. In the LPR Settings section, enter the  Queue 
Name  (e.g. LPR1) and select the  LPR Byte 
Counting Enabled .
3. Click the   button.
8Click the   button.
9Click the   button.
OK
Next
Finish 
						

							Installing  th e LPR (Line Printer  Remote)  Port
27
Windows 2000/XP
Printer Section
10Click the   button.
11Click the   button.
Click the   button.
The printer properties dialog box closes and you 
have now configured the printer as a network printer.
Close
Apply
OK 
						

							28
Installing the PS Driver Security Utility
If you wish to use the MailBox and Secure MailBox functions, it is essential that you setup the Utility settings
first.
To control the Charge Management with the Accounting Management application, it is essential that you
setup the Utility settings first.
Windows 98/Me/NT/2000/XP
1Exit from all applications, then insert the Panasonic 
Printing System CD into the CD-ROM drive.
2Select the desired language.
3The setup message will display.
Click the   button.
4Click Printer Driver (PostScript3).
Next 
						

							Installing the PS Driver Security Utility
29
Windows 98/Me/NT/2000/XP
Printer Section
5Select Install PS Driver Security Utility.
6Click the   button.
7Click the   button if you want to place a
shortcut to PS Security Utility on your desktop.
8The required files are copied.
Next
Yes 
						

							Installing the PS Driver Security Utility
30
Windows 98/Me/NT/2000/XP
The PS Driver Security Utility folder has been added to the Program menu, and the installation has now
completed.
9Click the   button.Finish