Panasonic Sdr S70 Operating Instructions Manual

21VQT3E42
∫Charging/Recording time
≥Temperature: 25 oC (77 oF)/humidity: 60%RH (When using AC adaptor)
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely. 
Charging time and recordable time vary depending on the usage conditions such as 
high/low temperature.
≥ VW-VBL090 is not available for  .
Charging and recording time
SDR-S70/SDR-S71/SDR-T70
Battery model number
[Voltage/Capacity  (minimum)]Charging timeMaximum 
continuously...

22VQT3E42
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping 
recording, turning the unit on/off, moving the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Battery capacity indication≥The display changes as the battery capacity reduces. 
####
If the indication becomes  , the icon will beco me red. If the battery discharges, then 
( ) will flash.
≥ The remaining battery capacity is displayed when using the Panasonic...

23VQT3E42
Preparation
Setup
2
Recording to a card
The unit can record still pictures or motion pictures to an SD card, built-in memory, or HDD. 
To record to an SD card, read the following.
Use SD cards conforming to Class 2 or higher of the SD Speed Class Rating* for 
motion picture recording.
* The SD Speed Class Rating is the speed standard for successive writes. Check via the label on the card, etc.
Example: 
≥4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory 
Cards...

24VQT3E42
Caution:
Check that the access lamp has gone off.
1Open the LCD monitor.
2Open the SD card cover and insert (remove) the SD card into (from) 
the card slot.
≥Face the label side  B in the direction shown in the illustration and press it straight in as far 
as it will go.
≥ Press the center of the SD card and then pull it straight out.
3Securely close the SD card cover.
≥Do not touch the terminals on the back of the SD card.
≥ See page 113 for details on handling the SD card.
Inserting/removing...

25VQT3E42
Preparation
Setup
3
Turning the unit on/off
You can turn the power on and off using the power button or by opening and closing the LCD 
monitor.
Press the power button to turn on the power.
AThe status indicator lights.
Power is turned on when the LCD monitor is opened, and power is turned off when it is 
closed.
During normal use, opening and closing of the LCD monitor can be conveniently used 
to turn the power on/off.
∫ To turn on the power
A The status indicator lights.
∫To turn off the...

26VQT3E42
Preparation
Setup
4
Selecting a mode
Change the mode to recording or playback.
Operate the mode switch to change the mode to   or  .
Recording mode (l41, 45)
Playback mode ( l62, 67)
SDR-H100&S71&S70&T70-VQT3E42_eng.book  26 ページ  ２０１０年１１月２９日　月曜日　午後６時２１分 

27VQT3E42
Preparation
Setup
5
Using the menu screen
1Press the MENU button.
2Select the desired top menu A, 
then move the joystick right or 
press the joystick.
3Select the submenu item  B, 
then move the joystick right or 
press the joystick.
≥ Descriptions of submenus and current 
settings on menus are displayed 
scrolling at the bottom of the screen. 
4Select the desired setting, then 
press the joystick to enter the 
selection.
To get back to the previous screenMove the joystick left.
To exit the...

28VQT3E42
You can select the language on the screen display and the menu screen.
1Press the MENU button, then select [SETUP] # [LANGUAGE] and 
press the joystick.
2Select [English] and press the joystick.
Part of the menu will not be used d epending on the used functions. (l 105)
Recording mode
*1 It is not displayed when the Intelligent auto mode is on.
*2 It is displayed when the Intelligent auto mode is on.
*3 These menus are only for  .
*4 These menus are only for  .
*5 These menus are only for  / ....

29VQT3E42
MEDIA SELECT*3*4
Recording media may be set 
independently for both still pictures and 
motion pictures.
When recording to the SD card, select 
[SD CARD]. When recording to the 
built-in memory, select 
[Built-inMemory]. (l42, 62, 67)
When recording to the SD card, select 
[SD CARD]. When recording to the 
HDD, select [HDD]. ( l42, 62, 67)
SETUP
[DISPLAY]
The screen display can be changed to 
[OFF] (a portion of information 
displayed) or [ON] (all information 
displayed).
[EXT. DISPLAY] (...

30VQT3E42
[ALERT SOUND]
The starting and stopping of a recording 
or power on/off can be confirmed with 
this sound.
2 Beeps for 4 times
When an error occurs. Check the 
sentence displayed on the screen. 
(l 103)
[POWER LCD] (l 35)
[LCD SET] (l 35)
[TV ASPECT] (l 78)
[INITIAL SET]
Set to [YES] for changing the menu 
settings back to the default condition.
(Settings for [MEDIA SELECT]
*3*4, 
[CLOCK SET] and [LANGUAGE] will 
not be changed.)
[FORMAT MEDIA]
*3*4( l 76)
[FORMAT CARD]
*5( l 76)
[MEDIA...