Panasonic Sdr S70 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Sdr S70 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 11
11VQT3E42 Preparation Recording Playback Backup With a PC Others Playback Playback [1] Motion picture playback ............ 62 Creating still picture from motion picture .......................................... 64 Time frame index ......................... 65 Playing back motion pictures by date ......................................... 65 Repeat playback .......................... 66 Resuming the previous playback ....................................... 66 [2] Still picture playback...
Page 12
12VQT3E42 Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of December 2010. These may be subject to change. Battery pack VW-VBL090 (SDR-S70/SDR-S71) (SDR-T70) Battery pack VW-VBK180 (SDR-H100) AC adaptor VSK0711 AC cable K2CA2CA00025 AV cable K2KC4CB00027 USB cable K1HA05AD0007 CD-ROM Software SDR-H100&S71&S70&T70-VQT3E42_eng.book 12 ページ 2010年11月29日 月曜日 午後6時21分
Page 13
13VQT3E42 Quick Guide ∫Inserting the battery Install the battery by inserting it in the direction shown in the figure. ∫Charging the battery 1 Connect the AC adaptor to this unit’s DC input terminal. 2 Connect the AC cable to the AC adaptor, then the AC outlet. ≥ For the AC cable, plug in 2 and then 3. ≥ The status indicator A will flash red at an interval of 2 seconds, indicating that charging has begun. ∫ Inserting/removing an SD card 1) Open the LCD monitor. 2) Open the SD card cover and insert...
Page 14
14VQT3E42 ∫Selecting a mode Operate the mode switch to change the mode to or . ∫Language selection 1) Press the MENU button, then select [SETUP] # [LANGUAGE] and press the joystick. 2) Select [English] and the press the joystick. ∫Recording motion pictures 1) Change the mode to and open the LCD monitor. 2) Press the recording start/stop button to start recording. ≥ When you begin recording, ; changes to ¥ . ∫ Recording still pictures 1) Change the mode to and open the LCD monitor. 2)...
Page 15
15VQT3E42 ∫Motion picture playback 1) Change the mode to . 2) Use the joystick to select the Play Mode Select icon A, then press the center of the joystick. 3) / Select [VIDEO], then press the center of the joystick. Select [SD CARD]/[Built-inMemory] and [VIDEO], then press the center of the joystick. Select [SD CARD]/[HDD] and [VIDEO], then press the center of the joystick. ≥ Select [ENTER], then press the center of the joystick. ≥ Press the MENU button to cancel the settings. 4) Select the...
Page 16
16VQT3E42 Preparation Before using 1 Parts identification and handling 1 LCD monitor ≥Pull the LCD monitor out in the direction of the arrow with your fingers. ≥ It can open up to 90 o. ≥ It can rotate up to 180 o A towards the lens or 90 o B towards the opposite direction. ≥ The brightness and color level of the LCD monitor can be adjusted. ( l35) 2 Intelligent auto/Manual button [iA/MANUAL] ( l38) 3 Optical image stabilizer button [ O.I.S.] ( l48) 4 Power button [ ] ( l25) 5 Delete button [ ] (...
Page 17
17VQT3E42 11 Video light (SDR-S71) (l48) 12 Lens cover 13 Lens 14 Open/close switch for the lens cover For the lens protection, be sure to close the lens cover when not in use. Slide open/close switch for the lens cover. 15 Microphone (built-in, stereo) 16 AF/AE button [AF/AE] ( l49) 17 Joystick Use the joystick to select the recording functions and playback operations, and to operate the menu screen. Move the joystick up, down, left, or right to select a setting or scene and then press the...
Page 18
18VQT3E42 22 Photoshot button [ ] (l45) 23 When recording: Zoom lever [W/T] (l 47) When playing back: Thumbnail display switch [ / ] ( l63)/ Volume lever [ sVOL r] ( l 64) 24 Speaker 25 Status indicator ( l25) 26 HDD access lamp [ACCESS HDD] (SDR-H100) ( l8) 27 DC input terminal [DC IN] ( l20) ≥ Do not use any other AC adaptors except the supplied one. 28 Grip belt Adjust the belt length and the pad position. 1 Flip the belt. 2 Adjust the length. 3 Replace the belt. 29 Battery release lever...
Page 19
19VQT3E42 Preparation Setup 1 Power supply ∫About batteries that you can use with this unit // The battery that can be used with this unit is VW-VBL090/VW-VBK180/VW-VBK360. The battery that can be used with this unit is VW-VBK180/VW-VBK360. ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery ( VW-VBK180/VW-VBK360) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by...
Page 20
20VQT3E42 ≥The battery will not be charged if the power is turned on. ≥ It is recommended to charge the battery in a temperature between 10 oC to 30 oC (50 oF to 86 oF). (The battery temperature should also be the same.) 1Connect the AC adaptor to this unit’s DC input terminal. 2Connect the AC cable to the AC adaptor, then the AC outlet.≥ For the AC cable, plug in 2 and then 3. ≥The status indicator A will flash red at an interval of 2 seconds, indicating that charging has begun. ∫ Connecting to the...