Panasonic Sdr S15 Operating Instructions Manual

							80LSQT142681LSQT1426
With a 
computer
4Installing VideoCam SuiteVideoCam Suite only runs on Windows computers.
Install and uninstall the software with administrator authorization.
●
●
Before installing the software, check your operating environment (P.78) and 
close any other software applications which are running.
Do not perform other computer operations while installing the software.
Do not connect this unit to the computer until installation is complete.\
Install VideoCam Suite only from the supplied CD-ROM.
Insert the supplied CD-ROM into your computer.
The installation program begins automatically and the message appears on\
 
the screen.
Click [Next].
Select the folder where the application will be installed and click [Nex\
t].
Decide whether to create a shortcut.
Select the country or region where you live and 
click [Next]. Check the message prompting you to confirm 
and click [YES].
If you cannot select your country or region, click 
[NTSC Area].
●
●
Click [Install] and follow the directions appearing 
on the screen to complete the installation.
If the installation is interrupted halfway through, 
the software may not operate properly.
If using Windows 2000, Microsoft DirectX 9.0c 
must be installed in order to operate VideoCam 
Suite 2.0. Depending on the operating 
environment, you may be required to install 
DirectX 9.0c. If so, follow the instruction on the 
screen and install it. 
If you install the software on a PC that is not 
compatible with DirectX 9.0c, the PC may 
not work properly. If you are unsure whether 
or not your PC is compatible, contact the PC 
manufacturer.
●
●
●
●
●
●
[Readme] is displayed when the installation is completed. Be sure to che\
ck 
the contents.
Click [Finish].
Select “Yes, I want to restart my computer now.” to automatically restart the 
computer and complete the installation.
Eject the CD-ROM from the computer.
After the installation is finished, the icon [
] is displayed in the task tray.
 If the Setup Menu does not start up automaticallyDouble-click the CD-ROM icon [] containing the CD-ROM drive in 
[Computer (My Computer)].
 Uninstalling the softwareFor Windows Vista
From the Start menu, select [Control Panel] → 
[Programs] → [Uninstall a Program].
For Windows 2000 or XP
Click [Start] → ([Settings] →) [Add or Remove 
Programs (Applications)] in the [Control Panel].
●
●
Select [VideoCam Suite 2.0] and click [Uninstall 
(Remove)] or [Uninstall/Remove].
Continue to follow the on-screen messages to 
uninstall it.
After uninstalling the software, restart the 
computer. 
						

							82LSQT142683LSQT1426
Importing motion pictures and still pictures
When this unit is connected to the computer, VideoCam Suite starts up 
automatically. To use the application with Windows Vista, log on with administrator 
authorization or via a standard user account. Guest accounts cannot be u\
sed. 
To use the application with Windows XP or 2000, log on with administrator 
authorization.
Connect the unit and AC adaptor (P.20) and set the mode dial to a position 
other than [OFF].
Connect this unit to a computer using the USB cable (supplied).
Insert the plugs as far as they will go.
Select [PC/RECORDER] on the [SELECT USB FUNCTION] screen of the 
unit.
VideoCam Suite is automatically launched.
●
Do not use any other USB cables except the supplied one. (Operation is \
not 
guaranteed with any other USB cables.)
Do not disconnect the USB cable or shut off the power while the card 
access lamp is lit.
The first time the unit is connected to the computer, the computer may have to 
be restarted.
To output motion pictures edited with VideoCam Suite to SD cards, use an 
applicable SD card. (P.18)
When outputting a large number of scenes to an SD card, DVD-R/RW or 
DVD-RAM, it may take time to display thumbnails or to output.
●
●
●
●
●
Editing motion pictures and still pictures
Double-click  on the desktop to start the program.
Startup is also possible by selecting [Start] →[All Programs]→[Panasonic]→
[VideoCam Suite 2.0] →[VideoCam Suite].
 First startupA window is displayed containing the licence agreement. Read the 
agreement carefully before continuing.
From the Start menu, select [All Programs]→[Panasonic] → [VideoCam 
Suite 2.0]→[Read this before starting], and then read the supplemental 
explanations and new information.
Closing VideoCam Suite
Click  or .
The “Simple Menu” is closed.
Click  or .
●
●
With a 
computer
5Using VideoCam SuiteFor a detailed explanation on how to use the software, see the VideoCam 
Suite operating instructions (PDF file). 
						

							82LSQT142683LSQT1426
Importing motion pictures and still pictures
When this unit is connected to the computer, VideoCam Suite starts up 
automatically. To use the application with Windows Vista, log on with administrator 
authorization or via a standard user account. Guest accounts cannot be u\
sed. 
To use the application with Windows XP or 2000, log on with administrator 
authorization.
Connect the unit and AC adaptor (P.20) and set the mode dial to a position 
other than [OFF].
Connect this unit to a computer using the USB cable (supplied).
Insert the plugs as far as they will go.
Select [PC/RECORDER] on the [SELECT USB FUNCTION] screen of the 
unit.
VideoCam Suite is automatically launched.
●
Do not use any other USB cables except the supplied one. (Operation is \
not 
guaranteed with any other USB cables.)
Do not disconnect the USB cable or shut off the power while the card 
access lamp is lit.
The first time the unit is connected to the computer, the computer may have to 
be restarted.
To output motion pictures edited with VideoCam Suite to SD cards, use an 
applicable SD card. (P.18)
When outputting a large number of scenes to an SD card, DVD-R/RW or 
DVD-RAM, it may take time to display thumbnails or to output.
●
●
●
●
●
Editing motion pictures and still pictures
Double-click  on the desktop to start the program.
Startup is also possible by selecting [Start] →[All Programs]→[Panasonic]→
[VideoCam Suite 2.0] →[VideoCam Suite].
 First startupA window is displayed containing the licence agreement. Read the 
agreement carefully before continuing.
From the Start menu, select [All Programs]→[Panasonic] → [VideoCam 
Suite 2.0]→[Read this before starting], and then read the supplemental 
explanations and new information.
Closing VideoCam Suite
Click  or .
The “Simple Menu” is closed.
Click  or .
●
●
With a 
computer
5Using VideoCam SuiteFor a detailed explanation on how to use the software, see the VideoCam 
Suite operating instructions (PDF file). 
						

							84LSQT142685LSQT1426
With a 
computer
6
Uploading video clips to 
YouTubeWhen VideoCam Suite is used, you can upload the video clips you have 
recorded in WEB Mode to YouTube.
   Connect the unit and AC adaptor (P.20) and set the mode dial to a position 
other than [OFF].
 Connect this unit to a computer using the USB cable (supplied).
  Select [WEB MODE] on the [SELECT USB FUNCTION] screen of the unit.
The YouTube uploader on the computer screen starts up, and the video clips 
you have recorded in WEB Mode are displayed as thumbnails.
  Place check marks for the video clips 
that are to be uploaded.
  Input the titles and other information 
of each video clip to be displayed on 
YouTube.
  Enter your YouTube user name and 
password.
  Click [Upload].
  A message prompting you to check the copyrights of the contents is 
displayed. Check the contents, enter a check, and click [OK].
For further details on operation, refer to the operating instructions (\
PDF file) 
for VideoCam Suite.
When uploading is completed, the “EXITED WEB MODE.” message appear\
s 
on the LCD monitor screen of the unit.
●
●
●
  
You can also take the following steps to upload your video clips. 
(Simplified uploading)
  Connect the unit and AC adaptor (P.20) and set the mode dial to [].
 Press .
  The “PLEASE CONNECT USB CABLE.” message appears. Connect the 
computer to the unit using the USB connecting cable (supplied with the \
unit).
The YouTube uploader on the computer screen starts up, and the video 
clips you have recorded in WEB Mode are displayed as thumbnails.
 Concerning uploading to YouTube●   Because YouTube™ services and specifications are subject to change, 
operation of online services cannot be guaranteed in the future. Available 
services and screens are subject to change without notice.
(These services are valid as of December 1, 2008.)
●   Unless you are the copyright holder or you have obtained permission from\
 
the copyright holder, do not upload videos protected under copyright.
● 
						

							84LSQT142685LSQT1426
With a 
computer
6
Uploading video clips to 
YouTubeWhen VideoCam Suite is used, you can upload the video clips you have 
recorded in WEB Mode to YouTube.
   Connect the unit and AC adaptor (P.20) and set the mode dial to a position 
other than [OFF].
 Connect this unit to a computer using the USB cable (supplied).
  Select [WEB MODE] on the [SELECT USB FUNCTION] screen of the unit.
The YouTube uploader on the computer screen starts up, and the video clips 
you have recorded in WEB Mode are displayed as thumbnails.
  Place check marks for the video clips 
that are to be uploaded.
  Input the titles and other information 
of each video clip to be displayed on 
YouTube.
  Enter your YouTube user name and 
password.
  Click [Upload].
  A message prompting you to check the copyrights of the contents is 
displayed. Check the contents, enter a check, and click [OK].
For further details on operation, refer to the operating instructions (\
PDF file) 
for VideoCam Suite.
When uploading is completed, the “EXITED WEB MODE.” message appear\
s 
on the LCD monitor screen of the unit.
●
●
●
  
You can also take the following steps to upload your video clips. 
(Simplified uploading)
  Connect the unit and AC adaptor (P.20) and set the mode dial to [].
 Press .
  The “PLEASE CONNECT USB CABLE.” message appears. Connect the 
computer to the unit using the USB connecting cable (supplied with the \
unit).
The YouTube uploader on the computer screen starts up, and the video 
clips you have recorded in WEB Mode are displayed as thumbnails.
 Concerning uploading to YouTube●   Because YouTube™ services and specifications are subject to change, 
operation of online services cannot be guaranteed in the future. Available 
services and screens are subject to change without notice.
(These services are valid as of December 1, 2008.)
●   Unless you are the copyright holder or you have obtained permission from\
 
the copyright holder, do not upload videos protected under copyright.
● 
						

							86LSQT142687LSQT1426
Connecting the unit to a computer 
Use the AC adaptor to supply power to this unit and connected devices.
  Connect the unit and AC adaptor (P.20) and set the mode dial to a position 
other than [OFF].
 Connect this unit to a computer using the USB cable (supplied). (P.82)
 Select  [PC/RECORDER].The SD card in the unit appears on the 
computer as an external drive.
•
When this unit is connected to the computer, [CAM_SD] appears in [My 
Computer].
The SD card appears as an external drive (E drive, etc.) in Windows Ex\
plorer.
While the computer is accessing the SD card of this unit, [
] appears at the 
bottom right of the unit’s LCD monitor.
Disconnecting the unit
 Click the [] or [] icon on the task bar.
 Click “Safely remove USB Mass Storage Device.”
 When the disconnection confirmation message appears, click [OK].
 Disconnect the USB cable (supplied) from the computer.
●
●
●
SD card folder structure
The content of the SD card in the unit can be checked from the computer.
Motion pictures and still pictures recorded with the unit are saved in t\
he folder 
tree below.
SD card with data recorded on this unit
Still pictures (Max. 999) taken in [
] mode
DPOF setting information on still pictures
Motion pictures (Max. 99) taken in [
] mode
Do not move, rename, delete, compress, format or perform other operation\
s 
to the motion pictures or folders using Windows Explorer or the Macintos\
h 
Finder. Motion pictures will no longer play back.
To edit motion pictures, use software capable of editing SD-Video files, such 
as VideoCam Suite.
●
●
Data not supported by this unit cannot be played back on this unit even \
if 
copied onto an SD card.
●
With a 
computer
7
Using this unit as an 
external drive 
(Mass storage)
This unit can be used as an external drive. 
						

							86LSQT142687LSQT1426
Connecting the unit to a computer 
Use the AC adaptor to supply power to this unit and connected devices.
  Connect the unit and AC adaptor (P.20) and set the mode dial to a position 
other than [OFF].
 Connect this unit to a computer using the USB cable (supplied). (P.82)
 Select  [PC/RECORDER].The SD card in the unit appears on the 
computer as an external drive.
•
When this unit is connected to the computer, [CAM_SD] appears in [My 
Computer].
The SD card appears as an external drive (E drive, etc.) in Windows Ex\
plorer.
While the computer is accessing the SD card of this unit, [
] appears at the 
bottom right of the unit’s LCD monitor.
Disconnecting the unit
 Click the [] or [] icon on the task bar.
 Click “Safely remove USB Mass Storage Device.”
 When the disconnection confirmation message appears, click [OK].
 Disconnect the USB cable (supplied) from the computer.
●
●
●
SD card folder structure
The content of the SD card in the unit can be checked from the computer.
Motion pictures and still pictures recorded with the unit are saved in t\
he folder 
tree below.
SD card with data recorded on this unit
Still pictures (Max. 999) taken in [
] mode
DPOF setting information on still pictures
Motion pictures (Max. 99) taken in [
] mode
Do not move, rename, delete, compress, format or perform other operation\
s 
to the motion pictures or folders using Windows Explorer or the Macintos\
h 
Finder. Motion pictures will no longer play back.
To edit motion pictures, use software capable of editing SD-Video files, such 
as VideoCam Suite.
●
●
Data not supported by this unit cannot be played back on this unit even \
if 
copied onto an SD card.
●
With a 
computer
7
Using this unit as an 
external drive 
(Mass storage)
This unit can be used as an external drive. 
						

							88LSQT142689LSQT1426
 Connect this unit to a computer using the USB cable (supplied). (P.82)
 Display the Device Manager.For Windows 2000
Click [Start] → [Settings] → [Control Panel] → [System]  → [Hardware] tab 
→ [Device Manager] button. 
For Windows XP
Click [Start] → [Control Panel] → [Performance and Maintenance]  → 
[System]  → [Hardware] tab in the [System Properties] window  → [Device 
Manager] button.
For Windows Vista
From the Start menu, select [Control Panel] → [System and Maintenance] 
→ [System]  → [Device Manager] (from the [Task] window).
If a confirmation window appears halfway through, click the [Continue] 
button.
●
●
●
 When the driver is recognized[USB Mass Storage Device] appears in [Universal Serial Bus controllers].\
 
(The display differs according to the type of computer.)
 When the driver is not recognized[!] or [Unknown device] appears in [Universal Serial Bus controllers] or\
 [Other 
devices].
Try the following.
Method [1] :   Turn off the unit and your computer once and turn on again to 
reconnect.
Method [2] :   Remove the SD card from the unit and insert it back into the 
unit.
Method [3] : Connect the USB cable to another USB port on the computer.
If the driver cannot be recognized by any of the methods above, contact \
the 
computer manufacturer.
•
•
•
●
With a 
computer
8Checking the connectionsWith a 
computer
9
Connecting to a Macintosh 
computer
Operating environment required for external drives
Supported 
computers Macintosh
OS Mac OS X v10.4, Mac OS X v10.5
CPU PowerPC G5 1.9 GHz or higher
Intel
® Core™ Duo, Intel® Core™ Solo
Interface USB port
Even if the system requirements mentioned in these operating instruction\
s are 
fulfilled, some personal computers cannot be used.
The USB equipment operates with the driver installed as standard in the \
OS.
Connecting the unit to a computer 
Connect this unit to a computer using the USB cable 
(supplied). (P
 .82)
An icon labeled [NO_NAME] or [Untitled] appears on the desktop.
Copying still pictures to computers
  Double click the [NO_NAME] or [Untitled] icon on the desktop.
      The still pictures are in the [100CDPFP] folder inside the [DCIM] folder\
.
  Drag and drop the still pictures to copy onto the computer.
Disconnecting the unit
  Drag and drop the [NO_NAME] or [Untitled] icon to the Trash.
  Disconnect the USB cable (supplied) from the computer.
●
●
Apple, Mac OS are registered trademarks or trademarks of Apple Inc. in the 
United States and/or other countries.
PowerPC
® is a trademark of International Business Machines Corporation.
Intel® Core™ is registered trademarks or trademarks of Intel Corporation in\
 the 
United States and/or other countries.
Other names of systems and products mentioned in these instructions are \
usually the registered trademarks or trademarks of the manufacturers who\
 
developed the system or product concerned.
●
●
●
● 
						

							88LSQT142689LSQT1426
 Connect this unit to a computer using the USB cable (supplied). (P.82)
 Display the Device Manager.For Windows 2000
Click [Start] → [Settings] → [Control Panel] → [System]  → [Hardware] tab 
→ [Device Manager] button. 
For Windows XP
Click [Start] → [Control Panel] → [Performance and Maintenance]  → 
[System]  → [Hardware] tab in the [System Properties] window  → [Device 
Manager] button.
For Windows Vista
From the Start menu, select [Control Panel] → [System and Maintenance] 
→ [System]  → [Device Manager] (from the [Task] window).
If a confirmation window appears halfway through, click the [Continue] 
button.
●
●
●
 When the driver is recognized[USB Mass Storage Device] appears in [Universal Serial Bus controllers].\
 
(The display differs according to the type of computer.)
 When the driver is not recognized[!] or [Unknown device] appears in [Universal Serial Bus controllers] or\
 [Other 
devices].
Try the following.
Method [1] :   Turn off the unit and your computer once and turn on again to 
reconnect.
Method [2] :   Remove the SD card from the unit and insert it back into the 
unit.
Method [3] : Connect the USB cable to another USB port on the computer.
If the driver cannot be recognized by any of the methods above, contact \
the 
computer manufacturer.
•
•
•
●
With a 
computer
8Checking the connectionsWith a 
computer
9
Connecting to a Macintosh 
computer
Operating environment required for external drives
Supported 
computers Macintosh
OS Mac OS X v10.4, Mac OS X v10.5
CPU PowerPC G5 1.9 GHz or higher
Intel
® Core™ Duo, Intel® Core™ Solo
Interface USB port
Even if the system requirements mentioned in these operating instruction\
s are 
fulfilled, some personal computers cannot be used.
The USB equipment operates with the driver installed as standard in the \
OS.
Connecting the unit to a computer 
Connect this unit to a computer using the USB cable 
(supplied). (P
 .82)
An icon labeled [NO_NAME] or [Untitled] appears on the desktop.
Copying still pictures to computers
  Double click the [NO_NAME] or [Untitled] icon on the desktop.
      The still pictures are in the [100CDPFP] folder inside the [DCIM] folder\
.
  Drag and drop the still pictures to copy onto the computer.
Disconnecting the unit
  Drag and drop the [NO_NAME] or [Untitled] icon to the Trash.
  Disconnect the USB cable (supplied) from the computer.
●
●
Apple, Mac OS are registered trademarks or trademarks of Apple Inc. in the 
United States and/or other countries.
PowerPC
® is a trademark of International Business Machines Corporation.
Intel® Core™ is registered trademarks or trademarks of Intel Corporation in\
 the 
United States and/or other countries.
Other names of systems and products mentioned in these instructions are \
usually the registered trademarks or trademarks of the manufacturers who\
 
developed the system or product concerned.
●
●
●
● 
						

							90LSQT142691LSQT1426
Others1Menus
Recording and playback functions can be used and basic settings made.
(For setting procedures, see P.26.)Settings enclosed in 
           are active at the time of purchase.
●
Recording menu
Set the mode dial to [] or [].     Î1 not displayed in Intelligent Auto Mode               Î2 displayed only in Manual Mode
Top menu SubmenusPurpose Settings/NoticesMode  Page
 BASIC
SCENE MODEUse settings tailored to specific scenes.  OFF   /  /  /  /  /  Î251
REC MODESet the motion picture recording mode. /  / 33
ASPECT Set aspect ratio for recording. 4:3 /   16:9  32
CLOCK SETSet the date/time. YES / NO28
SET WORLD TIMESet the local date/time of travel destinations. YES / NO56
 ADVANCED
D.ZOOMUse the digital zoom.  OFF   / 25x / 700x36
FACE FRAMINGDetect faces automatically and make best 
adjustments. OFF /   ON   48
WIND CUT
Reduce the wind noise.
OFF /   ON   Î157
EISAvoid jitter.
OFF /   ON   Î137
GUIDE LINESCheck composition for tilting.  OFF   / ON Î157
ZOOM MIC Apply zoom effect to sounds.  OFF   / ON37
AUTO SLW SHTRAdjust shutter speed automatically.  OFF   / ON Î137
SHTR EFFECT  Cancel out shutter sound. OFF /   ON  34
FADE COLORChange the fade color. WHITE /   BLACK  43
 SETUP Make basic settings.  For details on the SETUP menu (P.92)―
 LANGUAGESelect the menu and display language.  English   / Français / Español27
Playback menu
Set the mode dial to [] or [].
Top menu Submenus
Purpose Settings/NoticesMode  Page
 
EDIT SCENELOCK SET Prevent accidental deleting. YES / NO 64
DELETEDelete scenes.  ALL / SELECT / COPIED / NO62, 75
PICT. SETUP
LOCK SETPrevent accidental deleting. YES / NO64
DPOF SETWrite print information onto SD cards. CANCEL ALL / SET / NO65
DELETEDelete scenes.  ALL / SELECT / NO62
SLIDE INTERVALSet the interval for slide operation SHORT /   NORMAL   / LONG61
 SETUP Make basic settings.  For details on the SETUP menu (P.92)―
 LANGUAGE
Select the menu and display language.  English   / Français / Español27