Panasonic Sdi Card Aw Pb504n Operating Instructions

SDI Card
AW-PB504N
Before attempting to connect, operate or adjust this product, please read these instructions completely.
Printed in Japan
F1103S0  VQT0H53D 

-2-
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point...

-3-
CONTENTS
WARNING/CAUTION FOR SAFETY  ........................................................................\
.............. 4
PREFACE ................................................................\
.............................................................. 5
PRECAUTIONS ............................................................\
....................................................... .. 5
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS  ............................................... 6...

-4-
WARNING/CAUTION FOR SAFETY
WARNING
• Refer all servicing to qualified personnelTo reduce the risk of electric shock, dont remove
cover or back, unless you are a qualified personnel.
Refer all mountings, connections, servicing to
qualified service personnel.
• No water or moisture inside Do not let water or moisture into the product, or
expose it to moisture, to prevent a fire and electric
shock.
• If you see smoke or smell an odor from the product, if water or other foreign matter gets inside, if it...

-5-
• Installing this SDI card in a convertible camera suchas the AW-E350, AW-E650, AW-E655, AW-E750
makes it possible to output images from the camera
as 270 Mbps (compliant with SMPTE259M
standard) serial digital component signals. 
(BELDEN 8281 or equivalent coaxial cable; 
max. 200 m)
• EDH (Error Detection and Handling) flags complying with the SMPTE RP165 standard can be added. 
(A switch can be used to enable or disable the
addition of these flags.)• Zoom focus control of lenses equipped with...

-6-
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
ZOOM/FOCUS
SDI
OUT
1
SDI
OU T
2
1 ZOOM/FOCUS connector
This is the standard input connector for the lenses
equipped with a remote control function for zoom
focus.
When using a Panasonic pan/tilt head (such as the
AW-PH300A, AW-PH350), use the LENS I/F
connector on the pan/tilt head instead of this
connector.
2 SDI output connector [SDI OUT1, 2]
Serial digital component signal can be output. 3
Setting switches
1: EDH  
(Factory setting: ENABLE)
An EDH flag...

-7-
MOUNTING
• Be sure to ask your store, where you purchasedthe product, for mounting.
• Disconnect the camera power connector before mounting.
• Before handling the card, touch a metal part of the camera to discharge the static from the
human body.
An anti-static wrist strap is recommended for
added safety.
If you touch the card while you are still charged
with static, it may cause trouble.
• Keep the metal parts of the card free of contact with other metal parts.
(1) Switch the camera off, and...

-8-
Rear panelCard setscrews (6 mm)Rear panel 
setscrews (8 mm)
SDI card
Option card slot cover 

-9-
DC12V  IN
G/L IN
VIDEO
OUT
CONTROL
IN/OUT
VIDEO
IN
G/L
OUT CAMERAMONITOR
VIDEO OUT
G/L IN
I/F REMOTE
OPTION CARD
IRIS
DC12V IN
MENUITEM/AWCYES/ABCNO/BAR
ONPOWEROFFPOWERO    I
FUSE(POWER)FUSEFUSEAC Adaptor  AW-PS505
SDI
OUT
1
ZOOM/FOCUS
SDI
OUT
2
Convertible  Camera AW 
–E600
• Before cable connection, switch power off.
• Use the AC adaptor AW-PS505 for power supply.
Use the power cable AW-CA4T1.
• For details on connecting individual devices, refer to the respective op\
erating instructions.
• For...

-10-
APPEARANCE
Unit: mm (inch)
92 (3-5/8)
111 (4-3/8)
21.5
(27/32)
70 (2-3/4)
SDI
OUT
1
ZOOM/FOCUS
SDI
OUT
2