Panasonic SD Mobile Printer Sv P20u Operating Instrucitons Manual

							31
7Click the [Next] Button.
≥Re-click the [Next] Button when the search 
confirmation screen appears.
≥The message [File *****.DLL is not found] can 
be displayed depending on the environment of 
PC. Many PCs may install this file on the Hard 
Disk. Click [Refer] and select 
[C:\windows\option\cabs].
≥If your system is Windows 2000, proceed to 
step 13.
8Click the [Finish] Button.
9[Add New Hardware Wizard] screen 
appears again. Click the [Cancel] Button.
10Restart the computer.
11[Add New Hardware Wizard] screen 
appears again. Repeat the steps from 4 
through 7.
12Select [No] when the [Add Printer 
Wizard] screen appears.
≥Select [Yes] to set as the default printer.
≥The item for selecting the default printer may not 
be displayed depending on the environment of 
the PC.
13Click the [Finish] Button.
≥The driver setup is completed.
≥When the Printer Driver Software is not detected, 
please refer to page 34, 36.
≥Please read also the “Notes on the Printer Driver” 
(
l
ll l41)
 carefully.
≥When installation is not finished correctly or the 
message is displayed, refer to [Readme.txt] file in 
the supplied CD-ROM.
11 7
12,13
8
9


						

							32
Installing the Printer Driver 
(Cont.)
If the [Found New Hardware Wizard] screen does not 
appear, install with the following steps.
1Before installation, check that all 
applications have exited.
2Connect the printer to your PC with a 
USB cable and turn on the printer.
3Select [Start] >> [Printers and Faxes].
[Printers and Faxes] may not be present 
on some PCs. In this case, select [Start] 
>> [Control Panel] >>( [Printers and 
Other Hardware] >>) [Printers and 
Faxes].
4Select [Add a printer] from [Printer 
Tasks].
5When the [Add Printer Wizard] is 
activated, click [Next].
6Select [Local printer attached to this 
computer] and deselect [Automatically 
detect and install my Plug and Play 
printer]. 
7Click [Next].
8Select [Use the following port] and select 
the port through which the Printer is 
connected from the pull-down menu.
≥Select only the [USB00X] port. (e.g. USB001).
9Click [Next].
10Click [Have Disk].
Installing from the [Add Printer Wizard] 
screen (Windows XP)
5
6,7
8,9
10


						

							33
11Select the folder where the Printer Driver 
is located.
≥If the CD-ROM drive is assigned to the D drive, 
select [D:\Win2K-XP] folder.
12Click [OK].
13Check that [Panasonic SV-P20] is 
displayed and click [Next].
14Click [Next].
≥If a screen to select the default printer is 
displayed, select [Yes] if it is to be the default 
printer.
≥If the screen to select whether the printer is 
shared or not is displayed, select [This Printer is 
not Shared], if the printer is not shared and click 
[Next].
15If a screen asking you to execute a test 
print is displayed during installation, 
select [No], and click [Next].
16Click [Finish].
≥The installation is now completed.
11,12
13
14
15
16


						

							34
Installing the Printer Driver 
(Cont.)
If the [Add New Hardware Wizard] screen does not 
appear, install with the following steps.
1Before installation, check that all 
applications have exited.
2Connect the printer to your PC with a 
USB cable and turn on the printer.
3Select [Start] >> [Settings] >> [Printers].
4Double-click the [Add Printer] icon.
5When the [Add Printer Wizard] is 
activated, click [Next].
6Select [Local Printer] and click [Next].
7Click [Have Disk].
8Select the folder where the Printer Driver 
is located.
≥If the CD-ROM drive is assigned to the D drive,  
select [D:\Win9X-Me] folder.
9Click [OK].
Installing from the [Add Printer Wizard] 
screen (Windows 98SE/Me)
3
4
6
7
8,9 5


						

							35
10Check that [Panasonic SV-P20] is 
displayed and click [Next].
11Select the USB port through which the 
Printer is connected and click [Next].
≥Select only the [USB00X] port. (e.g. USB001).
12Click [Finish].
≥If a screen to select the default printer is 
displayed, select [Yes] if it is to be the default 
printer.
≥If a screen asking you whether a test print is 
executed or not is displayed during installation, 
select [No].
≥The installation is now completed.
11
12
10


						

							36
Installing the Printer Driver 
(Cont.)
If the [Found New Hardware Wizard] screen does not 
appear, install with the following steps.
1Before installation, check that all 
applications have exited.
2Connect the printer to your PC with a 
USB cable and turn on the printer.
3Select [Start] >> [Settings] >> [Printers].
4Double-click the [Add Printer] icon.
5When the [Add Printer Wizard] is 
activated, click [Next].
6Select [Local Printer] and deselect 
[Automatically detect and install my Plug 
and Play printer].
7Click [Next].
8Select [Use the following port] and select 
the port through which the Printer is 
connected in the adjacent list.
≥Select only the [USB00X] port. (e.g. USB001).
9Click [Next].
10Click [Have Disk].
Installing from the [Add Printer Wizard] 
screen (Windows 2000)
3
4
6,7 5
8,9
10


						

							37
11Select the folder where the Printer Driver 
is located.
≥If the CD-ROM drive is assigned to the D drive, 
select [D:\Win2K-XP] folder.
12Click [OK].
13Check that [Panasonic SV-P20] is 
displayed and click [Next].
14Click [Next].
≥If a screen to select the default printer is 
displayed, select [Yes] if it is to be the default 
printer.
≥If the screen to select the whether the printer is 
shared or not is displayed, select [This Printer is 
not Shared], if the printer is not shared and click 
[Next].
15If a screen asking you whether a test 
print is executed or not is displayed 
during installation, select [No], and click 
[Next].
16Click [Finish].
≥The installation is now completed.
11,12
13
14
15
16


						

							38
Installing SD Viewer for Printer
1Insert the supplied CD-ROM into the CD-
ROM drive and double-click the 
[SD Viewer].
2Double-click the [Setup.exe].
≥The install screen is displayed.
3Click [Next].
≥After reading the displayed contents, please 
carry out the installation according to 
instructions.
4Read the License Agreement and click 
[I agree].
5Complete the setup according to the 
message. 
≥Installation will be completed.
≥The SD Viewer for Printer is available in English, 
German and French.
≥Please read the PDF-based instructions for how to 
use the SD Viewer for Printer.
≥To view the installed operating instructions, Adobe 
Acrobat Reader 4.0 or higher is required. Please 
install Adobe Acrobat Reader 5.0 from the supplied 
CD-ROM.
≥Before using for the first time, select [Readme] from 
[Start] >> [(All) Programs] >> [Panasonic] >> 
[SD Viewer for Printer], and read any supplementary 
details or updates.
≥Please read [Readme.txt] before starting to use.
1
2
3
4
5


						

							39
Printing a file from the PC
You can print an image with the SD Viewer for Printer. 
For details, please refer to the PDF-based 
instructions for how to use the SD Viewer for Printer.
1Click [Start] >> [Program (All Programs)] 
>> [Panasonic] >> [SD Viewer for Printer] 
>> [SD Viewer for Printer].
≥[SD Viewer for Printer] starts.
2Click the folder saving the picture from 
the explorer.
≥The thumbnails are displayed.
≥When restarting, the pictures in the folder 
selected last are displayed after finishing 
[SD Viewer for Printer].
3Click the pictures.
≥The selected pictures are surrounded with a 
blue line.
4Click [File] >> [Print].
5Click  to open detail setting.
6Select [Panasonic SV-P20].
≥The setting screen and name of printer 
displayed are different depending on OS.
7Set the kind of paper. (l
ll l40)
8Click [Print].
9Click [Yes]. 
10Insert a sheet of paper. (l
ll l15)
≥When [Panasonic SV-P20-USB00X] 1 is 
displayed, insert a sheet of paper.
≥If a Memory Card is inserted into the Printer, images 
on the Memory Card are displayed. However, if an 
image is printed from the PC, the image from the PC 
will be printed, not the one from the Memory Card.
1
2,3
4
5,8
9 6
1


						

							40
Printing a file from the computer 
(Cont.)
If you click [Properties] in Step 6 on the previous 
page, the Advanced setting screen will open to allow 
you to set the paper, number of multiples, etc.
Click [OK] after setting, and the display will revert 
back to the [Properties] screen. (Click [OK] again, and 
the display will revert back to the print preview 
screen.)
1Click [Layout] tab and select the printing 
direction. 
2Click [Advanced]
3Select the kind of paper. 
1Click [Paper] tab and select the kind of 
paper.
2Select the printing direction.
≥An image may be larger than the defined printing 
area or may be printed on two or more pages when 
using some applications. Adjust the paper size or 
paper setting in your application software. 
For Windows XP/2000
For Windows 98SE/Me
1
2
3
1,
2