Panasonic SD Mobile Printer Sv P20u Operating Instrucitons Manual
Have a look at the manual Panasonic SD Mobile Printer Sv P20u Operating Instrucitons Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
16≥After the image is finished printing, a message will
be displayed to feed in the next sheet of paper.
≥Do not touch the paper during printing.
≥Do not open the Ink Cassette Compartment Door
during printing.
≥When the printer stops during printing, refer to
“Internal Temperature“ page 47.
≥Please read the “Precautions” carefully. (
l
ll l44)
≥If the [ON] Lamp flashes, the battery will run down
shortly. Recharge the battery or connect the AC
adaptor.
≥If messages are displayed, refer to “Messages...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-15.png "Page 16
16≥After the image is finished printing, a message will
be displayed to feed in the next sheet of paper.
≥Do not touch the paper during printing.
≥Do not open the Ink Cassette Compartment Door
during printing.
≥When the printer stops during printing, refer to
“Internal Temperature“ page 47.
≥Please read the “Precautions” carefully. (
l
ll l44)
≥If the [ON] Lamp flashes, the battery will run down
shortly. Recharge the battery or connect the AC
adaptor.
≥If messages are displayed, refer to “Messages...")
![Page 17
17
4Press the [MENU] button.
5Press the [21] button to select a image
and press the [DISPLAY] button.
≥ The selected image is marked with [ ¥] 1 on
the bottom-right corner of it.
6Repeat step 5 and select 8 images.
≥ After selecting 8 images, the preview image is
displayed.
≥ Images are arranged in the order selected (in
the order they were marked).
7Insert a sheet of paper. ( l
l l
l
15)
≥Use of the Ink Cassette/Paper Set
(VW-CSASD8)* is recommended.
*All accessories may not be available in all...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-16.png "Page 17
17
4Press the [MENU] button.
5Press the [21] button to select a image
and press the [DISPLAY] button.
≥ The selected image is marked with [ ¥] 1 on
the bottom-right corner of it.
6Repeat step 5 and select 8 images.
≥ After selecting 8 images, the preview image is
displayed.
≥ Images are arranged in the order selected (in
the order they were marked).
7Insert a sheet of paper. ( l
l l
l
15)
≥Use of the Ink Cassette/Paper Set
(VW-CSASD8)* is recommended.
*All accessories may not be available in all...")
![Page 18
18
Printing Multiple Screen Shots of
the Same Images
This printer can divide the screen into 8, and print
multiple screen shots of the same images.
1Insert a Memory Card, and Turn on the
Printer.
(
l
ll l12)
≥The Index picture screen is displayed.
2Press the [MENU] button.
≥The Menu screen is displayed.
3Press the [DISPLAY] button to select
[Print style] and press the [
21] button
to set it to [Copy 8].
4Press the [MENU] button.
5Press the [21] button to select a
desired image and press the...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-17.png "Page 18
18
Printing Multiple Screen Shots of
the Same Images
This printer can divide the screen into 8, and print
multiple screen shots of the same images.
1Insert a Memory Card, and Turn on the
Printer.
(
l
ll l12)
≥The Index picture screen is displayed.
2Press the [MENU] button.
≥The Menu screen is displayed.
3Press the [DISPLAY] button to select
[Print style] and press the [
21] button
to set it to [Copy 8].
4Press the [MENU] button.
5Press the [21] button to select a
desired image and press the...")
![Page 19
19
Inser ting a Frame Illustration
and Printing
You can insert illustrations stored in this printer into
the image and print it.
1Proceed to steps 1 through to 4 on
page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Frame] and press the [
21] button to
select a desired illustration.
≥After selecting the frame illustration, press the
[MENU] button.
3Insert a sheet of paper. (l
ll l15)
≥The image with the frame illustrations are
printed.
≥NOTE: The date will not be...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-18.png "Page 19
19
Inser ting a Frame Illustration
and Printing
You can insert illustrations stored in this printer into
the image and print it.
1Proceed to steps 1 through to 4 on
page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Frame] and press the [
21] button to
select a desired illustration.
≥After selecting the frame illustration, press the
[MENU] button.
3Insert a sheet of paper. (l
ll l15)
≥The image with the frame illustrations are
printed.
≥NOTE: The date will not be...")
![Page 20
20
Date Printing
You can print images with the date of recording
superimposed.
1Proceed to steps 1 through to 4 on
page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Date print] and press the [
2 1] button to
set to [ON].
≥After setting, press the [MENU] button.
3Insert a sheet of paper. (l
ll l15)
≥The [Date] 1 mark turns to green.
≥The image is printed with the recorded date in
the lower right corner.
≥If images have been saved or edited on the PC, the
date saved or...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-19.png "Page 20
20
Date Printing
You can print images with the date of recording
superimposed.
1Proceed to steps 1 through to 4 on
page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Date print] and press the [
2 1] button to
set to [ON].
≥After setting, press the [MENU] button.
3Insert a sheet of paper. (l
ll l15)
≥The [Date] 1 mark turns to green.
≥The image is printed with the recorded date in
the lower right corner.
≥If images have been saved or edited on the PC, the
date saved or...")
![Page 21
21
Trimming
This printer can trim the horizontal or vertical edges of
an image and stretch it so that the image fills up the
entire print space.
1Proceed to steps 1 through to 4 on
page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Trimming] and press the [
21] button to
set to [ON].
≥After setting, press the [MENU] button.
3Insert a sheet of paper. (l
ll l15)
≥The image is trimmed and printed. 1
(If [Trimming] is turned [OFF], a blank space will
remain.
2)
OK...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-20.png "Page 21
21
Trimming
This printer can trim the horizontal or vertical edges of
an image and stretch it so that the image fills up the
entire print space.
1Proceed to steps 1 through to 4 on
page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Trimming] and press the [
21] button to
set to [ON].
≥After setting, press the [MENU] button.
3Insert a sheet of paper. (l
ll l15)
≥The image is trimmed and printed. 1
(If [Trimming] is turned [OFF], a blank space will
remain.
2)
OK...")
![Page 22
22
Printing DPOF-set Images
Images marked with the DPOF option of a digital
camera or SD video devices will be printed
automatically. (“DPOF”: Digital Print Order Format; a
feature that allows the user to mark photos that they
wish to print. This feature is usually offered by digital
cameras or other SD video devices.)
1Proceed to steps 1 and 4 on page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[DPOF] and press the [
1] button.
3Insert a sheet of paper. (l
ll l15)...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-21.png "Page 22
22
Printing DPOF-set Images
Images marked with the DPOF option of a digital
camera or SD video devices will be printed
automatically. (“DPOF”: Digital Print Order Format; a
feature that allows the user to mark photos that they
wish to print. This feature is usually offered by digital
cameras or other SD video devices.)
1Proceed to steps 1 and 4 on page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[DPOF] and press the [
1] button.
3Insert a sheet of paper. (l
ll l15)...")
![Page 23
23
Adjusting Picture Quality
1Select the image you wish to adjust and
press the [MENU] button.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Picture] and press the [
1] button.
≥The adjusting screen is displayed.
3Press the [DISPLAY] button to select the
item to be adjusted.
[COLOR-LEVEL]: Adjusts the depth of the color.
[TINT]: Adjusts the tint of the color.
[BRIGHTNESS]: Clarify dark portions.
[CONTRAST]: Adjust picture brightness and
shade.
[SHARPNESS]: Sharpen outline....](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-22.png "Page 23
23
Adjusting Picture Quality
1Select the image you wish to adjust and
press the [MENU] button.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[Picture] and press the [
1] button.
≥The adjusting screen is displayed.
3Press the [DISPLAY] button to select the
item to be adjusted.
[COLOR-LEVEL]: Adjusts the depth of the color.
[TINT]: Adjusts the tint of the color.
[BRIGHTNESS]: Clarify dark portions.
[CONTRAST]: Adjust picture brightness and
shade.
[SHARPNESS]: Sharpen outline....")
![Page 24
24
Setting LCD Monitor
1Select an image and press the [MENU]
button.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[LCD] and press the [
1] button.
≥ The adjusting screen is displayed.
3Press the [DISPLAY] button to select the
item to be adjusted.
[COLOR-LEVEL]: Adjusts the depth of the color.
[BRIGHTNESS]: Clarifies dark portions.
[SCREEN SAVER]: If this is turned [ON], the
screen saver will be activated
when this printer is inactive
for approx. 30 minutes.
[UNDER PRINT]:...](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-23.png "Page 24
24
Setting LCD Monitor
1Select an image and press the [MENU]
button.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select
[LCD] and press the [
1] button.
≥ The adjusting screen is displayed.
3Press the [DISPLAY] button to select the
item to be adjusted.
[COLOR-LEVEL]: Adjusts the depth of the color.
[BRIGHTNESS]: Clarifies dark portions.
[SCREEN SAVER]: If this is turned [ON], the
screen saver will be activated
when this printer is inactive
for approx. 30 minutes.
[UNDER PRINT]:...")
![Page 25
25
After Use
1Hold down the Power Button [ ] for
about 2 seconds.
≥Turn off the SD Mobile Printer.
2Open the Memory Card Door 1 and push
the edge of the Memory Card 2.
≥Pull out the Memory Card.
3Put the Printer into the Carrying Case.
1
Í
1
2](http://img.usermanuals.tech/thumb/58/63820/w64_sv-p20u_en_om_d-24.png "Page 25
25
After Use
1Hold down the Power Button [ ] for
about 2 seconds.
≥Turn off the SD Mobile Printer.
2Open the Memory Card Door 1 and push
the edge of the Memory Card 2.
≥Pull out the Memory Card.
3Put the Printer into the Carrying Case.
1
Í
1
2")
21 Trimming This printer can trim the horizontal or vertical edges of an image and stretch it so that the image fills up the entire print space. 1Proceed to steps 1 through to 4 on page 14. ≥The Menu screen is displayed. 2Press the [DISPLAY] button to select [Trimming] and press the [ 21] button to set to [ON]. ≥After setting, press the [MENU] button. 3Insert a sheet of paper. (l ll l15) ≥The image is trimmed and printed. 1 (If [Trimming] is turned [OFF], a blank space will remain. 2) OK SETSELECT Trimming Picture LCD ADJUST ADJUST MENU 2/2Frame ONNo frame MENUDISPLAY 2,3
22 Printing DPOF-set Images Images marked with the DPOF option of a digital camera or SD video devices will be printed automatically. (“DPOF”: Digital Print Order Format; a feature that allows the user to mark photos that they wish to print. This feature is usually offered by digital cameras or other SD video devices.) 1Proceed to steps 1 and 4 on page 14. ≥The Menu screen is displayed. 2Press the [DISPLAY] button to select [DPOF] and press the [ 1] button. 3Insert a sheet of paper. (l ll l15) ≥Setting the print count in [Number of copies] will have no effect. Only the DPOF configured print count will be printed. ≥If 100 or more copies are set to be printed on the DPOF settings, only 99 will be printed. ≥The SD Mobile Printer cannot configure DPOF. ≥When [Print style] is set to [Select 8], DPOF-set images are selected automatically and printed. ≥ The date will not be printed, even if the printer’s date function is activated. (The DPOF-set date will be printed.) OK PRINTSELECT Number of copies Print style DPOF Date printStandard 1 ON PRINTMENU 1/2 MENUDISPLAY 2
23 Adjusting Picture Quality 1Select the image you wish to adjust and press the [MENU] button. ≥The Menu screen is displayed. 2Press the [DISPLAY] button to select [Picture] and press the [ 1] button. ≥The adjusting screen is displayed. 3Press the [DISPLAY] button to select the item to be adjusted. [COLOR-LEVEL]: Adjusts the depth of the color. [TINT]: Adjusts the tint of the color. [BRIGHTNESS]: Clarify dark portions. [CONTRAST]: Adjust picture brightness and shade. [SHARPNESS]: Sharpen outline. 4Press the [2 1] button to adjust the level. 5Press the [MENU] button twice. ≥Adjustment on the LCD monitor is approximate. ≥We recommend adjusting picture quality when you use this printer. ≥When adjusting the depth of the color on [COLOR LEVEL], some colors may become darker when printed. ≥Adjusting [SHARPNESS] cannot be checked on the LCD monitor and only is noted on Print. 1 2 3,4 BRIGHTNESS OK SETSELECT OK ADJUSTSELECT Trimming Picture LCD ADJUST ADJUST MENU 2/2Frame ONNo frame MENUDISPLAY MENUDISPLAY MENUDISPLAY MENUDISPLAY 5
24 Setting LCD Monitor 1Select an image and press the [MENU] button. ≥The Menu screen is displayed. 2Press the [DISPLAY] button to select [LCD] and press the [ 1] button. ≥ The adjusting screen is displayed. 3Press the [DISPLAY] button to select the item to be adjusted. [COLOR-LEVEL]: Adjusts the depth of the color. [BRIGHTNESS]: Clarifies dark portions. [SCREEN SAVER]: If this is turned [ON], the screen saver will be activated when this printer is inactive for approx. 30 minutes. [UNDER PRINT]: If this is turned [ON], the LCD monitor stays ON while images are being printed. (This setting is disabled when this printer is running on the battery.) 4Press the [2 1] button to adjust the level. 5Press the [MENU] button twice. ≥LCD Monitor adjustments will have no effect on print quality. ≥Adjust the LCD monitor if the visibility of the LCD monitor is low. ≥The LCD monitor may not be seen clearly from a certain angle. ≥Before printing it is advised that all LCD settings should be set to the factory default settings. This will give the most accurate representation of what the print will look like. 3,4 BRIGHTNESS OK SETSELECT MENUDISPLAY 1MENUDISPLAY 2 MENUDISPLAY 5MENUDISPLAY OK ADJUSTSELECT Trimming Picture LCD ADJUST ADJUST MENU 2/2Frame ONNo frame
25 After Use 1Hold down the Power Button [ ] for about 2 seconds. ≥Turn off the SD Mobile Printer. 2Open the Memory Card Door 1 and push the edge of the Memory Card 2. ≥Pull out the Memory Card. 3Put the Printer into the Carrying Case. 1 Í 1 2
26 Cutting the Left and Right Sides of the Paper After Printing 1Fold in both directions along the perforation lines. 2Tear along the perforation lines. ≥There are perforation lines on both ends of the paper. Be sure to tear off both sides. 1 2
27 Connecting with your PC System Requirements (For Printer Driver and SD Viewer for Printer) Compatible machines: IBM® PC/AT compatible personal computer with: Microsoft® Windows® XP Home Edition /Professional, Windows® Me, Windows® 2000 Professional or Windows® 98 Second Edition pre-installed. CPU: Intel ® Pentium® II/ CeleronTM 500 MHz or later (including compatible CPU) Graphic display: High Color (16 bit) with a minimum resolution of 800k600. Installed memory: 64 MB or more (128 MB or more recommended) 128 MB or more for Windows XP (256 MB or more recommended) Free hard disk space: At least 200 MB Disk drive: CD-ROM drive Interface: USB terminal (Up to 12 Mbps) Other requirements: Pointing devices such as mouse or equivalent to Mouse ≥While every attempt is made to create software that will operate properly in most PC’s, previously installed software and unique hardware in the PC may occasionally cause an operating problem. ≥Use the supplied AC adapter when using this printer connecting with your PC. ≥Remove the memory card when using this printer as the printer for your PC. ≥If two or more USB devices are connected to the personal computer, normal operation is not guaranteed. ≥When connecting to a PC use the USB cable supplied. A USB extension cable cannot be used. ≥When connecting to a PC with USB Hub, normal operation is not guaranteed. ≥The names of the products you are using may differ from the names given in the text. Depending on the operating environment and other factors, the contents of the screens used in these instructions may not necessarily match what you will see on your screen. ≥Although the screens in these Operating Instructions are shown in English for the sake of example, other languages are supported as well. ≥When the Printer Driver is installed on your PC for the first time, the USB port cannot be selected in the selection stage for the port, because the USB port is not set. (l42) ≥When the printer Driver is installed, the Windows’CD-ROM could be required depending on the operating environment of your PC.
28 Installing the Printer Driver Installing this printer driver allows the Printer to be used as a full-color printer. 1Turn on the PC and insert the supplied CD-ROM into the CD-ROM drive. 2Turn on the Printer. (l ll l12) 3Connect the Printer to the PC using auxiliary USB cable. ≥The [Found New Hardware Wizard] screen appears. 4Click the [Next] Button. ≥Confirm that the item [Install the software automatically] is selected. 5Click the [Finish] Button when the Printer Driver Software is detected. ≥The driver setup is completed. ≥When the Printer Driver Software is not detected, please refer to page 32. ≥Please read also the “Notes on the Printer Driver” ( l ll l41) carefully. For Windows XP 4 5 3 USB
29 1Turn on the PC and insert the supplied CD-ROM into the CD-ROM drive. 2Turn on the Printer. (l ll l12) 3Connect the Printer to the PC using auxiliary USB cable. ≥The [Add New Hardware Wizard] screen appears. ≥Depending on your PC, step 4 and 5 may be skipped. If this is the case, proceed from step 6. 4Click the [Next] Button. 5Click the [Finish] Button when the Printer Driver Software is detected. ≥[Add New Hardware Wizard] screen appears again. 6Click the [Next] Button. 7Select [No] when the [Add Printer Wizard] screen appears. ≥If a screen to select the default printer is displayed, select [Yes] if it is to be the default printer. ≥The item for selecting the default printer may not be displayed depending on the environment of the PC. ≥After clicking [Finish], the message [File *****.DLL is not found] can be displayed depending on the environment of the PC. Many PCs may install this file on the Hard Disk. Click [Refer] and select [C:\windows\option\cabs]. 8Click the [Finish] Button. ≥The driver setup is completed. ≥When the Printer Driver Software is not detected, please refer to page 34. ≥Please read also the “Notes on the Printer Driver“ ( l ll l41) carefully. For Windows Me 4,6 USB 3 5 7 8
30 Installing the Printer Driver (Cont.) 1Turn on the PC and insert the supplied CD-ROM into the CD-ROM drive. 2Turn on the Printer. (l ll l12) 3Connect the Printer to the PC using auxiliary USB cable. ≥The [Add (Found) New Hardware Wizard] screen appears. ≥If the [Add (Found) New Hardware Wizard] screen does not appear, please refer to page 34, 36. ≥Depending on your PC environment, steps 4 to 8 may be skipped. If this is the case, proceed from step 9. 4Click the [Next] Button. ≥The [Add (Found) New Hardware Wizard] screen appears. 5Click the [Next] Button. ≥Confirm whether your device is configured to the optimal driver detection setting. 6Check the location to be specified and enter the path as “D:\Win9X-ME” if your system is Windows 98SE. Enter the path as “D:\Win2K-XP” if your system is Windows 2000 (example of D drive assigned as CD-ROM drive). For Windows 98SE/2000 4 5 6 USB 3