Panasonic SD Mobile Printer Sv P20u Operating Instrucitons Manual

21
Trimming
This printer can trim the horizontal or vertical edges of 
an image and stretch it so that the image fills up the 
entire print space.
1Proceed to steps 1 through to 4 on 
page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select 
[Trimming] and press the [
21] button to 
set to [ON].
≥After setting, press the [MENU] button.
3Insert a sheet of paper.  (l
ll l15)
≥The image is trimmed and printed. 1
(If [Trimming] is turned [OFF], a blank space will 
remain. 
2)
OK...

22
Printing DPOF-set Images
Images marked with the DPOF option of a digital 
camera or SD video devices will be printed 
automatically. (“DPOF”: Digital Print Order Format; a 
feature that allows the user to mark photos that they 
wish to print. This feature is usually offered by digital 
cameras or other SD video devices.)
1Proceed to steps 1 and 4 on page 14.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select 
[DPOF] and press the [
 1] button.
3Insert a sheet of paper. (l
ll l15)...

23
Adjusting Picture Quality
1Select the image you wish to adjust and 
press the [MENU] button.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select 
[Picture] and press the [
 1] button.
≥The adjusting screen is displayed.
3Press the [DISPLAY] button to select the 
item to be adjusted.
[COLOR-LEVEL]: Adjusts the depth of the color.
[TINT]: Adjusts the tint of the color.
[BRIGHTNESS]: Clarify dark portions.
[CONTRAST]: Adjust picture brightness and 
shade.
[SHARPNESS]: Sharpen outline....

24
Setting LCD Monitor
1Select an image and press the [MENU] 
button.
≥The Menu screen is displayed.
2Press the [DISPLAY] button to select 
[LCD] and press the [
 1] button.
≥ The adjusting screen is displayed.
3Press the [DISPLAY] button to select the 
item to be adjusted.
[COLOR-LEVEL]: Adjusts the depth of the color.
[BRIGHTNESS]: Clarifies dark portions.
[SCREEN SAVER]: If this is turned [ON], the 
screen saver will be activated 
when this printer is inactive 
for approx. 30 minutes.
[UNDER PRINT]:...

25
After Use
1Hold down the Power Button [ ] for 
about 2 seconds. 
≥Turn off the SD Mobile Printer.
2Open the Memory Card Door 1 and push 
the edge of the Memory Card 2.
≥Pull out the Memory Card.
3Put the Printer into the Carrying Case.
1
Í
1
2



26
Cutting the Left and Right Sides 
of the Paper After Printing
1Fold in both directions along the 
perforation lines.
2Tear along the perforation lines.
≥There are perforation lines on both ends of the 
paper. Be sure to tear off both sides.
1
2



27
Connecting with your PC
System Requirements (For Printer Driver and SD 
Viewer for Printer)
Compatible machines:
IBM® PC/AT compatible personal computer with: Microsoft® Windows® XP Home Edition 
/Professional, Windows® Me, Windows® 2000 Professional or Windows® 98 Second 
Edition pre-installed.
CPU: 
Intel
®  Pentium®  II/ CeleronTM  500 MHz or later (including compatible CPU)
Graphic display:
High Color (16 bit) with a minimum resolution of 800k600.
Installed memory:
64 MB or more (128 MB or more...

28
Installing the Printer Driver
Installing this printer driver allows the Printer to be 
used as a full-color printer.
1Turn on the PC and insert the supplied 
CD-ROM into the CD-ROM drive.
2Turn on the Printer. (l
ll l12)
3Connect the Printer to the PC using  
auxiliary USB cable.
≥The [Found New Hardware Wizard] screen 
appears.
4Click the [Next] Button.
≥Confirm that the item [Install the software 
automatically] is selected.
5Click the [Finish] Button when the Printer 
Driver Software is detected....

29
1Turn on the PC and insert the supplied 
CD-ROM into the CD-ROM drive.
2Turn on the Printer. (l
ll l12)
3Connect the Printer to the PC using  
auxiliary USB cable.
≥The [Add New Hardware Wizard] screen 
appears.
≥Depending on your PC, step 4 and 5 may be 
skipped. If this is the case, proceed from step 6.
4Click the [Next] Button.
5Click the [Finish] Button when the Printer 
Driver Software is detected.
≥[Add New Hardware Wizard] screen appears 
again. 
6Click the [Next] Button.
7Select [No] when the...

30
Installing the Printer Driver 
(Cont.)
1Turn on the PC and insert the supplied 
CD-ROM into the CD-ROM drive.
2Turn on the Printer. (l
ll l12)
3Connect the Printer to the PC using  
auxiliary USB cable.
≥The [Add (Found) New Hardware Wizard] 
screen appears.
≥If the [Add (Found) New Hardware Wizard] 
screen does not appear, please refer to page 
34, 36.
≥Depending on your PC environment, steps 4 to 
8 may be skipped. If this is the case, proceed 
from step 9.
4Click the [Next] Button.
≥The [Add...