Panasonic Sc Pt465ee K Operating Instructions

							21
Using on-screen menus
RQTX0088
∫Menu 2 (Video)∫Menu 3 (Audio)
∫[PT465]
 Menu 4 (Karaoke)
∫Menu 5 (HDMI)
(Continued on next page)
DATE DISPLAY
[JPEG] To select “ON” or “OFF” for picture’s 
date display
ROTATION
To rotate a picture (during pause)
[JPEG] : 0,------. 90,------.180,------.270 
^--------------------------------------------J
PICTURE MODE
NORMAL
CINEMA1:Mellows images and enhances detail 
in dark scenes.
CINEMA2:Sharpens images and enhances 
detail in dark scenes.
DYNAMIC:Enhances the contrast for powerful 
images.
ANIMATION:Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO, k2, k4
TRANSFER 
MODE
If you have chosen “480p”/“576p”/“720p”/“1080p” 
(progressive) or “1080i” (interlace) [“VIDEO 
FORMAT” in Menu 5 (HDMI)] or “PROGRESSIVE” 
under “VIDEO OUT (I/P)” (
➜ 24, “VIDEO” menu), 
select the method of conversion for progressive 
output to suit the type of material.
≥The setting will return to AUTO or AUTO1 when 
the disc tray is opened, the unit is turned off or 
another source is selected.
When playing PAL discs
AU TO: Automatically detects the film and video 
content, and appropriately converts it.
VIDEO: Select when using AUTO, and the 
content is distorted.
FILM: Select this if the edges 
of the film content 
appear jagged or rough 
when AUTO is selected. 
However, if the video content is distorted 
as shown in the illustration to the right, 
then select AUTO.
When playing NTSC discs
AU TO1: Automatically detects the film and video 
content, and appropriately converts it.
AU TO2:
In addition to AUTO1, automatically 
detects film contents with different frame 
rates and appropriately converts it
.
VIDEO: Select when using AUTO1 and AUTO2, 
and the content is distorted.
SOURCE SELECT[DivX]When you select “AUTO” the constructing method 
of the DivX contents is automatically distinguished 
and output. If the picture is distorted, select 
“INTERLACE” or “PROGRESSIVE” depending on 
which constructing method was used when the 
contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
JPGDATE
DIALOGUE 
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, MPEG, 3-channel or 
higher, with the dialogue recorded in the center 
channel)
[DivX] (Dolby Digital, 3-channel or higher, with the 
dialogue recorded in the center channel)
OFF, ON
Dolby PLII
OFF, MOVIE, MUSIC 
(➜ 30, Using Dolby Pro LogicII)
KARAOKE MODE
To select “ON” or “OFF” for Karaoke mode
(➜ 27, [PT465] Enjoying Karaoke)
≥When you select “ON”, “PLAY SPEED” (➜ 20) 
and “Dolby PLII” (➜ above) do not work.
HDMI STATUS
To show HDMI information.
(➜ 22, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜ 25, “HDMI” 
menu) set to “ON”.
To sharpen the “720p”, “1080i” and “1080p” 
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜ 25, “HDMI” 
menu) set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output 
as, high-definition video.)
§480p/576p/720p/1080p (progressive)§480i/576i/1080i (interlaced)
≥If the picture is distorted, press and hold 
[CANCEL] until the picture is displayed 
correctly. (The output will return to “480p/
576p”.)
§The numbers displayed depend on the disc 
being played. One of the above numbers is 
displayed.
COLOR SPACE (or 
COLOUR SPACE)
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜ 25, “HDMI” 
menu) set to “ON”.
To select suitable picture colour with your TV
YC
bCr (4:2:2), Y CbCr (4:4:4), RGB
≥If the setting above is not compatible with your 
TV, it will not be displayed.
PLII
HDMI
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 21  Thursday, December 13, 2007  9:04 AM
 
						

							
22
Using on-screen menus / About DivX VOD contents
RQTX0088
Using on-screen menus
Confirming HDMI informatione.g.
1 Connection status
2  Shows the output signal type.
3  Shows the number of audio channels.
4  (➜  21, VIDEO FORMAT)
5  [➜  21, 
COLOR SPACE (or COLOUR SPACE)]
[Note]
When “OFF” is selected in “AUDIO OUT” (➜  25, “HDMI” menu), “– – –” will 
be displayed in “AUDIO STREAM”.
DivX Video-on-Demand (VOD) content is encrypted for copyright 
protection. In order to play DivX VOD  content on this unit, you first need to 
register the unit.
Follow the online instructions for purchasing DivX VOD content to enter 
the unit’s registration code and register the unit. For more information 
about DivX VOD, visit www.divx.com/vod.
Display the unit’s registration code( ➜  25, “REGISTRATION” in “OTHERS” menu)
≥ We recommend that you make a note of this code for future reference.
≥ After playing DivX VOD content for the first time, another registration 
code is then displayed in “REGISTRATION (DIVX)”. Do not use this 
registration code to purchase DivX VO D content. If you use this code to 
purchase DivX VOD content, and then play the content on this unit, you 
will no longer be able to play any content that you purchased using the 
previous code.
≥ If you purchase DivX VOD content us ing a registration code different 
from this unit’s code, you will not be able to play this content. 
(“AUTHORIZATION ERROR” is displayed.)
Regarding DivX content that can only be played a set 
number of times
Some DivX VOD content can only be played a set number of times. When 
you play this content, the remaining number of plays is displayed.
You cannot play this content when the number of remaining plays is zero. 
(“RENTAL EXPIRED” is displayed.)
When playing this content
≥ The number of remaining plays is reduced by one if
– you press [ Í] or [SETUP].
– you press [ ∫STOP]. 
– you press [ :,9 SKIP] or [ 6, 5  SLOW/SEARCH] etc. and 
arrive at another content.
≥ Resume function ( ➜ 17, Stop) does not work.
HDMI    ---       INFORMATIO N
CO NNECTED STATE
AUDIO STREAM
MAX CHA NNEL
V IDEO FORMAT
COLOR SPACE CO
NNECTED
PCM
2ch
720p
YC bCr   4:4:4
12345
SET
RETURN
OTHERSREGISTRATION (DIVX)
DIVX (R) VIDEO ON DEMAND
YOUR REGISTRATION CODE IS
XXXXXXXX
TO LEARN MORE VISIT
www.divx.com/vod
8 alphanumeric characters
About DivX VOD contents
Body3_mst.fm  Page 22  Friday, December 14, 2007  12:49 PM
 
						

							23
Changing the player settings
RQTX0088
Changing the player settings
≥The settings remain intact even if you switch the unit to standby.
≥Underlined items are the factory settings in the following table.
∫“DISC” menu
§1Language options
[The[Middle[East,[South[Africa,[Saudi[Arabia[and[Kuwait]: FRENCH, SPANISH, GERMAN, RUSSIAN, HUNGARIAN, CZECH and POLISH
[Southeast[Asia[and[Thailand]: CHINESE TRAD.
[Australia[and[N.Z.]: FRENCH, SPANISH, GERMAN, ITALIAN, SWEDISH, DUTCH and POLISH
§2The original language designated on the disc is selected.§3Input the appropriate code from the language code list (➜ 25).§4If the language selected for “AUDIO” is not available, subtitles appear in that language (if available on the disc).(Continued on next page)
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECTSETUPSOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PAUSE STOP
SKIP
CANCEL
VOL FM/EXT-IN
TV/AVVOLiPod/USB
TVDVD
-W.S.
PL
SETUP
OKOK
ONE TOUCH PLAY123
456
789
0
10
-KARAOKE-RETURN
-ECHO-FUNCTIONSPT465PT460-RETURN-KARAOKERETURN
1Show the setup menu.
2Select the menu.
≥To return to the previous screen, press 
[-RETURN] ([PT460]: [RETURN]).
3Select the item.
4Make the settings.
5Exit.
SETUP
SET
MAINDISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
EXIT : SETUP
RETURN
Menu
OK
SET
RETURN
DISC
EXIT : SETUP SETTING STATE
AUDIO
SUBTITLE
MENUS
RATINGS
PASSWORDENGLISH
AUTO
ENGLISH
8 NO LIMIT
Display the current 
setting of the items below
ItemSetting
OK
OK
SETUP
QUICK SETUP enables successive settings of the items in the shaded area.
AU D I OChoose the audio language.≥ENGLISH≥(Language options)§1≥ORIGINAL§2≥OTHER  – – – –§3
SUBTITLEChoose the subtitle language.≥AUTO
§4≥ENGLISH≥(Language options)§1≥OTHER  – – – –§3
MENUSChoose the language for disc menus.Changing the menu language in QUICK 
SETUP also changes this setting.
≥ENGLISH≥(Language options)§1≥OTHER  – – – –§3
RATINGSSet a rating level to limit DVD-Video 
play.Setting ratings (When level 8 is selected)
≥0 LOCK ALL: To prevent play of discs without rating levels.
≥1 to 7
≥8 NO LIMIT
When you select your ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video disc exceeding the rating level is inserted in the unit.
Follow the on-screen instructions.
PA S S W O R DChange the password for “RATINGS”.≥SETTINGTo change ratings (When level 0 to 7 is selected)
≥CHANGE: Follow the on-screen instructions.
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 23  Thursday, December 13, 2007  9:04 AM
 
						

							24
Changing the player settings
RQTX0088
Changing the player settings
∫“VIDEO” menu
∫“AUDIO” menu
§5Refer to “Frame still and field still” (➜ 39, Glossary).§6 When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend 
on the performance of this connected equipment.
QUICK SETUP enables successive settings of the items in the shaded area.
TV ASPECTChoose the setting to suit your TV and 
preference.≥4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless 
prohibited by the disc).
≥4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the letterbox style.
≥4:3ZOOM: Regular aspect TV (4:3)
The picture zooms in and out.
≥16:9NORMAL: Widescreen TV (16:9)
Laterally stretches image.
≥16:9SHRINK: Widescreen TV (16:9)
Images appear at the center of the screen.
≥16:9ZOOM: Widescreen TV (16:9)
Expands to 4:3 aspect ratio.
TV TYPESelect to suit the type of TV.
≥STANDARD≥CRT≥LCD
≥PROJECTION≥PLASMA
TIME DELAYWhen connected with a Plasma 
display, adjust if you notice the audio is 
out of sync with the video.≥0ms/AUTO
≥20 ms≥40 ms≥60 ms≥80 ms≥100 ms
When using VIERA Link “HDAVI Control” with “HDAVI Control 3” compatible TV (➜ 28), select “0 ms/AUTO”. 
Audio and video will automatically be set in sync.
NTSC DISC OUTChoose PAL 60 or NTSC output when 
playing NTSC discs (➜ 34, Video 
systems).≥NTSC: When connected to an NTSC TV.
≥PAL60: When connected to a PAL TV.
[Southeast[Asia[and[Thailand]: “NTSC
” is the factory preset.
STILL MODESpecify the type of picture shown 
when paused.≥AUTO≥FIELD§5: The picture is not blurred, but picture quality is lower. 
≥FRAME§5: Overall quality is high, but the picture may appear blurred. 
VIDEO OUT (I/P)Select “PROGRESSIVE” only if 
connecting to a progressive output 
compatible TV.≥INTERLACE≥PROGRESSIVE: A message screen will appear. Follow the on-screen instructions.
DOLBY DIGITAL§6≥BITSTREAM≥PCMSelect to suit the type of equipment you connected to the HDMI AV OUT 
terminal.
Select “BITSTREAM” when the equipment can decode the bitstream (digital 
form of 5.1 channel data). Otherwise, select “PCM”.
(If the bitstream is output to the equipment without a decoder, high levels of 
noise can be output and may damage your speakers and hearing.)
DTS§6≥BITSTREAM≥PCM
[Except[Southeast[Asia[and[Thailand]
MPEG§6≥BITSTREAM
≥PCM
DYNAMIC RANGE≥ON: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with 
Dolby Digital)
≥OFF
SPEAKER SETTINGSMake settings for your speakers.≥SETTINGS:
≥C DELAY: 0ms, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker (➜ 26, Selecting the delay time of the speakers).
≥SL/SR DELAY: 0ms
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers (➜ 26, Selecting the delay time of the speakers).
≥TEST TONE: SETTING
Use the test tone for speaker level adjustments (➜ 31, Adjusting the speaker level).
≥CENTER, SURROUND RIGHT, SURROUND LEFT: `6dB to i6 dB (Factory preset: 0 dB
)
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 24  Thursday, December 13, 2007  9:04 AM
 
						

							25
Changing the player settings
RQTX0088
∫“DISPLAY” menu
∫“HDMI” menu
∫“OTHERS” menu
(Continued on next page)
QUICK SETUP enables successive settings of the items in the shaded area.
LA NGUAGEChoose the language for the 
on-screen messages.[The[Middle[East,[South[Africa,[Saudi[Arabia[and[Kuwait]
≥ENGLISH≥FRANÇAIS≥ESPAÑOL≥DEUTSCH
≥PУCCKИЙ≥MAGYAR≥ÇESKY≥POLSKI
[Southeast[Asia[and[Thailand]
≥ENGLISH
≥繁體中文
[Australia[and[N.Z.]
≥ENGLISH
≥FRANÇAIS≥ESPAÑOL≥DEUTSCH
≥ITALIANO≥SVENSKA≥NEDERLANDS≥POLSKI
VIDEO PRIORITY≥ON: When using the HDMI AV OUT terminal for video output. The resolution of the video output from the 
HDMI AV OUT terminal is optimized according to the capability of the connected equipment (e.g. TV).
≥OFF: When not using the HDMI AV OUT terminal for video output. Video output will not depend on the 
connected equipment, but on this unit.
AU D I O  OU T≥ON: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the 
connected equipment, audio output may differ from the audio settings of the main unit.)
≥OFF
: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of 
the main unit.)
RGB RANGEThis works only when “COLOR SPACE” 
(or “COLOUR SPACE”) in Menu 5 
(HDMI) is set to RGB (
➜ 21).
≥STANDARD≥ENHANCED: When the black and white images are not distinct.
VIERA Link≥ON: The VIERA Link “HDAVI ControlTM” function is available (➜ 28).
≥OFF
REGISTRATION [DivX]
Display the unit’s registration code.≥SHOW CODE
You need this registration code to purchase and play DivX Video-on-Demand (VOD) content (➜ 22).
JPEG TIME Set the speed of the slideshow.
Factory preset: 3 SEC
≥1 SEC to 15 SEC (in 1-unit steps)
≥15 SEC to 60 SEC (in 5-unit steps)
≥60 SEC to 180 SEC (in 30-unit steps)
FL DIMMERChange the brightness of the unit’s display.
≥BRIGHT≥DIM
≥AUTO: The display is dimmed, but brightens when you perform some operations.
QUICK SETUP≥SET
Follow the on-screen instructions.
DVD-VR/DATA Select to play only DVD-VR or DATA format.≥DV D - V R: To play the video programs on DVD-RAM or DVD-R/-RW.
≥DATA: To play the data files on DVD-RAM or DVD-R/-RW.
DEFAULTS This returns all values in the MAIN 
menu to the default settings.≥RESET
The password screen is shown if “RATINGS” (➜ 23) is set. Please enter the same password, then turn 
the unit off and on again.
Language code list
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Ameharic: 6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali, Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178
Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish: 7165Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185
Rhaeto-Romance:8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 25  Thursday, December 13, 2007  9:04 AM
 
						

							26
Changing the player settings
RQTX0088
 Enjoying the radio
(Effective when playing 5.1-channel sound)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for 
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating 
position, adjust the delay time to make up for the difference.
If either distance a or b is less than c, find the difference in the table 
and change to the recommended setting.
To make the delay time settings
Select “C DELAY” or “SL/SR DELAY” from “SPEAKER SETTINGS” in 
“AUDIO” menu (➜ 24).For presetting stations automatically, refer to page 13.
∫Presetting stations manually
[PT465] Up to 30 stations can be set.
[PT460] Up to 30 stations can be set in each band, FM and AM.
1While listening to the radio broadcast
Press [OK].
2While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X,W], 
and then press [OK].
Main unit:
1While listening to the radio broadcast
Press [MEMORY] twice.
2While a channel is flashing on the display
Press [XTUNEW], and then press [MEMORY].
A station previously stored is overwritten when another station is 
stored in the same channel preset.
Selecting the delay time of the speakers
a Center speakerb Surround speaker
Difference (Approx.)SettingDifference (Approx.)Setting
30 cm 1ms 150 cm 5ms
60 cm 2ms 300 cm 10ms
90 cm 3ms 450 cm 15ms
120 cm 4ms
150 cm 5ms
L
LS
R
SW
C
RS
C
RSLS

 


Approximate room dimensions
Circle of constant primary listening distance: Actual speaker position
: Ideal speaker position
: Primary listening distance
Manual tuning
1[PT465] Select “FM”.[PT460] Select “FM” or “AM”.
≥Main unit:
Press [SELECTOR].
2Select the frequency.
≥Main unit:
Press [-TUNE MODE] to select “MANUAL” 
on the display, and then press [XTUNEW] to 
select the frequency.
≥To start automatic tuning, press and hold 
[6, 5] (main unit: [XTUNEW]) until the 
frequency starts scrolling. Tuning stops when 
a station is found.
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAYLIST
SLOW/SEARCH
PLAY PAUSE STOP
SKIP
123
456
789
0
10CANCEL
VOL
ONE TOUCH PLAY
FM/EXT-IN
TV/AVVOLiPod/USB
TVDVD
OK
-KARAOKE-RETURN
FM/EXT-INFM/AMEXT-IN
PT460PT465
OK ,
,
Numbered
buttons
SELECTOR
TUNE
MEMORY
-TUNE MODE
FM/EXT-IN
[PT460]
[PT465]FM/AMEXT-IN
Changing the player settingsEnjoying the radio
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 26  Thursday, December 13, 2007  9:04 AM
 
						

							
27
[PT465]
 Enjoying Karaoke
RQTX0088
[PT465] Enjoying Karaoke
[Note]
Before connecting/disconnecting the microphone(s), reduce the volume of 
the main unit to its minimum.
Preparation
1 Select “DVD/CD” as the source.
2Press [ s, MIC VOL] on the main unit to select “MIC LVL1”.
Connect the microphone(s).Plug type:  ‰6.3 mm monaural standard plug
≥ When connecting the microphone, ensure the iPod has been 
disconnected.
≥ If a strange noise (howling) is emitted during use, move the microphone 
away from the speakers, or lower the microphone volume.
≥ When you are not using the microphone, disconnect it from the 
microphone jack, and lower the microphone volume to “MIC LVL1”.
≥ Karaoke mode will automatically turn off when you turn this unit off, 
open the disc tray, or select another source. You can add echo to your voice when using the microphone.
1Start playback and adjust the volume of the main unit.≥
5.1-channel sound will be down-mixed to 2-channel.
2Main unit:Adjust the microphone volume and 
start singing.
MIC LVL1 (lowest) to MIC LVL4 (highest)
Using Karaoke mode
1
(press and hold)
Show the Karaoke mode on-screen 
menu.
e.g. 
≥Alternatively, select “KARAOKE MODE” in 
[PT465]  Menu 4 (Karaoke) ( ➜ 21).
2Select “ON”.
3Select the item.
4Make the settings.≥To exit the screen, press [-RETURN].
-SLEEP-REPEAT
MUTI NG
-FL DISPLAY-PLAY MODE
SUB WOOFERSETUP SOU NDLE VEL
TOP ME NU
ME NU
DIRECTNAV IGATOR
START
PLAY
LIST
PL
OK
-RETURN—KARAOKE
—ECHO
OK-RETUR N-KARAOKE
-ECHO-FUNCTIO NS
-, + MIC VOL
Microphone
(not included)
Main unit
MIC VOL
-RETUR N-KARAOKE
1
KARAOKE MODE
OFF
OK
OK
OK
OK
Items shown differ depending on the type of disc.
AUDIO CHANGE
To change the audio mode  (when using 
Karaoke formatted discs)
[DVD-V]
Solo disc OFF:  Vocals off
ON:  Vo c a l s  o n
Duet disc OFF:  Vocals off
V1+V2:  Vocal 1 and 2
V1:  Vocal 1
V2:  Vocal 2
[DVD-VR]  [VCD]
LR: Left channel sound is heard from the left 
speaker and right channel sound is heard 
from the right speaker (Accompaniment and 
vocals) 
L: Only left channel sound (Accompaniment 
only)
R: Only right channel sound (Vocals only)
L+R:  Left and right channel sounds are mixed 
and heard from both speakers
“L” and “R” may be reversed on some discs.
KEY CONTROL
Except  [MPEG4]  [DivX]
To change the key of a song
› 6 (lowest) to  fl6 (highest)
OFF:  Normal
VOCAL CANCEL
Except  [MPEG4]  [DivX]
To reduce the vocal level  (when using stereo 
source not formatted for Karaoke)
ON:  Reduces vocal level
OFF:  Cancel
≥ This may not work depending on the type of 
song.
Adding echo effect
1
(press and hold)
Show the echo mode.e.g.
2While the echo 
mode is displayed  ECHO 1#ECHO 2#ECHO 3#ECHO 4
^---------------------  ECHO OFF,----------------------}
The effect increases with the level.
≥ To cancel, select “ECHO OFF”.
-ECHO-FU NCTIO NS
-ECHO-FU NCTIO NS
Body4_mst.fm  Page 27  Tuesday, December 18, 2007  10:32 AM
 
						

							
28
Using the VIERA Link “HDAVI Control
TM”
RQTX0088
Using the VIERA Link “HDAVI ControlTM”
VIERA Link “HDAVI Control”
VIERA Link “HDAVI Control” is a convenient function that offers linked 
operations of this unit, and a Panasonic TV (VIERA) under “HDAVI 
Control”. You can use this function by connecting the equipment with the 
HDMI cable. See the operating instructions for connected equipment for 
operational details.
≥ VIERA Link “HDAVI Control”, based on  the control functions provided by 
HDMI which is an industry standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we have developed and 
added. As such, its operation with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 3” function.
“HDAVI Control 3” is the newest standard (current as of December, 
2007) for Panasonic’s HDAVI Control compatible equipment. This 
standard is compatible with Panasonic’s conventional HDAVI 
equipment.
≥ Please refer to individual manuals for other manufacturers’ equipment 
supporting VIERA Link function.
The TV with “HDAVI Control 2 (or later)” function enables the following 
operation: VIERA Link Control only with TV’s remote control [for 
“HDAVI Control 2 (or later)”] ( ➜ 29).
Preparation
≥ Confirm that the HDMI connection has been made ( ➜ 10).
≥ Set “VIERA Link” to “ON” ( ➜ 25, “HDMI” menu).
≥ To complete and activate the connection correctly, turn on all VIERA 
Link “HDAVI Control” compatible equipment and set the TV to the 
corresponding HDMI input mode for this unit.
Setting the TV audio for VIERA Link “HDAVI Control”
Select between “
AU X” and “D-IN” to work with the linked operations.
Confirm the audio connection to the AUX terminal (for “AUX”) ( ➜ 10) or 
OPTICAL IN terminal (for “D-IN”) ( ➜ 11).
1 Press [FM/EXT-IN] ( [PT460]: [EXT-IN]) to select “
AU X” or “D-IN”.
2 Press [SETUP] to select “TV AUDIO”, then press [ 3] or [ 4] to switch 
to “
AUX” or “D-IN”.
Whenever the connection or settings  are changed, reconfirm the points 
above.
∫ Automatic setup
The settings for “TV ASPECT”§1 (➜  24, “VIDEO” menu) and 
“LANGUAGE”§ 2 (➜  25, “DISPLAY” menu) will automatically follow to 
the settings of the TV.
(This may not work if the corresponding setting you have made for 
your TV is not available on this unit.)
§ 1 When using VIERA Link “HDAVI Control” with “HDAVI Control 3” 
compatible TV
§ 2 When using VIERA Link “HDAVI Control” with “HDAVI Control 2 
(or later)” compatible TV
You can turn on this unit and the TV, and start playing the disc with a 
single press of a button.
This function also works if you press [ 1PLAY] on this unit’s remote 
control when this unit is in standby mode.
[Note]
Playback may not be immediately displayed on the TV. If you miss the 
beginning portion of playback, press [ :] or [6] to go back to where 
playback started.
≥ When you switch the TV input to TV tuner mode, this unit will 
automatically switch to 
“AUX”§ or “D-IN”§. (This does not work when this 
unit is in “IPOD” mode.)
≥ When you start disc play, the TV will automatically switch its input mode 
for this unit.
When the TV is turned off, this unit goes into standby mode automatically.
≥ This function works only when “DVD/CD”, 
“USB”, “AUX”§ or “D-IN”§ is 
selected as the source on this unit.
≥ When the TV is turned on, this unit does not turn on automatically. 
(Power on link is not available.)
[Note]
When you press [ Í], only this unit turns off. Other connected equipment 
compatible with VIERA Link “HDAVI Control” stays on.
§“AU X” or “D-IN” (“DIGITAL IN”) works depending on the “TV AUDIO” 
setting ( ➜above, Setting the TV audio for VIERA Link “HDAVI 
Control”).
-SLEEP-REPEAT
MUTI NG
-FL DISPLAY-PLAY MODE
SUB WOOFER-CH SELECTSETUP SOUND
LEVEL
TOP ME NU
ME NU
DIRECTNAV IGATOR
START
PLAY
LIST
SLO W/SEARCH
PLAY
PAUSE
STOP
SKIP
12 3
4 5
6
7 8
9
0
10CA NCEL
VOL
FM/EXT-I
N
TV /A VVOLiPod/USB
TVD V D
-W .S.
PL
OK
ONE TOUCH PLAY
SETUP
PLAY
SKIP
SLOW/SEARCH
ONE TOUCH  PLAY
-KARAOKE-RETUR
N
-ECHO-FUNCTIO NS
FM/EXT-I NFM/AMEXT-IN
PT460PT465
One touch play
Start disc playback.This unit’s speakers will be automatically 
activated ( ➜ 29).
Auto input switching
Power off link
ONE TOUCH PLAY
Body4_mst.fm  Page 28  Friday, December 14, 2007  12:53 PM
 
						

							29
Using the VIERA Link “HDAVI Control
TM”
RQTX0088
You can select whether audio is output from this unit’s speakers or the TV 
speakers by using the TV menu settings. For details, refer to the operating 
instructions of your TV.
Home Cinema
This unit’s speakers are active.
≥When this unit is in standby mode, changing the TV speakers to this 
unit’s speakers in the TV menu will automatically turn this unit on and 
select “AUX”
§ or “D-IN”§ as the source.
≥The TV speakers are automatically muted.
≥You can control the volume setting using the volume or mute button on 
the TV’s remote control. (The volume level is displayed on the main 
unit’s FL display.)
≥To cancel muting, you can also use this unit’s remote control (➜ 14).
≥If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
≥The volume of this unit is set to “0”.
–
This function works only when “DVD/CD”, “USB”, “AUX”§ or “D-IN”§ is 
selected as the source on this unit.
≥Audio output is 2-channel audio.
When switching between this unit’s speakers and TV speakers, the TV 
screen may be blank for several seconds.You can control the playback menus of this unit with the TV’s remote 
control. When operating the TV’s remote control, refer to the below 
illustration for operation buttons.
1 Select this unit’s operation menu by using the TV menu settings.
(For details, refer to the operating instructions of your TV.)
The START menu will be shown.
e.g. [DVD-V]
≥The START menu can also be shown by using a button on the TV’s 
remote control (e.g. [OPTION]).
– When 
“DVD/CD” or “USB” is selected as the source, this works 
only during stop mode.
– This does not work while iPod music playback screen is displayed 
on the TV.
2 Select the desired item on the START menu (➜ 15).
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu.)
You can operate the playback with the indicated controls.
≥The on-screen control panel can also be shown by using a button on the 
TV’s remote control (e.g. [OPTION]).
– This works only during 
“DVD/CD” or “USB” playback and resume 
modes or, while iPod music playback screen is displayed on the TV.
[Note]
≥Depending on the menu, some button operations cannot be performed 
from the TV’s remote control.
≥You cannot input numbers with the numbered buttons on the TV’s 
remote control ([0] to [9]). Use this unit’s remote control to select the 
play list etc.
Speaker controlVIERA Link Control only with TV’s remote 
control [for “HDAVI Control 2 (or later)”]
DVD/CD Home Cinema
OK
RETURN
Input Selection Playback Disc
TOP  MENU (DVD)
MENU (DVD)
Playback/menu 
access
SEARCHRETURN SEARCH
PLAYPAUSE
STOP
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 29  Thursday, December 13, 2007  9:04 AM
 
						

							30
Using sound effects
RQTX0088
Using sound effects
[Note]
≥The following sound effects may not be available or have no effect with 
some sources, or when headphones are used (➜ 15).
≥You may experience a reduction in sound quality when these sound 
effects are used with some sources. If this occurs, turn the sound effects 
off.
Preparation
To display the picture, turn on the TV and select the appropriate video 
input mode.
∫Equalizer
You can select sound quality settings.
Each time you press [3,4]:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
∫Real Center Focus
(Effective when playing audio containing center channel sound 
or when Dolby Pro Logic II is on.)
You can make the sound of the center speaker seem like it is coming 
from within the TV.
R.C.FCS ON,------.R.C.FCS OFF
∫Surround Enhancer
Automatically adjusts each speaker to enhance the surround sound 
effect of 5.1-channel audio. When playing two-channel audio, the 
audio of the L/R front speakers is also output through the rest of the 
speakers creating a surround sound effect.
SRD ENH ON,------.SRD ENH OFF
Except [DivX]
Dolby Pro LogicII is an advanced decoder that derives 5-channel 
surround from stereo sound sources, whether or not it has been 
specifically Dolby Surround encoded.
≥“ÎPLII” lights when there is effect.
≥This does not work when audio is output from HDMI AV OUT terminal.
≥You can adjust the volume of the surround speakers to get the best 
surround effect (➜ 31, Adjusting the speaker level).
Except [DivX]
You can enhance the surround effect for low volume 5.1-channel sound. 
(Convenient for late night viewing.)
Setting the sound effects
1Select a sound mode.
Each time you press the button:
EQ: Equalizer
R.C. FCS: Real Center Focus
SRD ENH: Surround Enhancer
2While the selected 
mode is displayedMake settings.Refer to the followings for setting details of 
each sound effect.
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER
-CH SELECTSETUP SOUND
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PAUSE STOP
SKIP
123
456
789
0
10CANCEL
FM/EXT-IN
TV/AVVOLiPod/USB
TVDVD
-W.S.
PL
OKOK
ONE TOUCH PLAY
LEVEL
PLII
+,    VOL
-RETURN
VOL
SOUND,—W.S.
SETUPSUBWOOFER LEVEL—CH SELECT
-KARAOKE
-ECHO-FUNCTIONS
SW BOOST
SOUND
-W.S.
Using Dolby Pro LogicII
Each time you press the button:
MOVIE: Movie software
MUSIC: Stereo sources
OFF: Cancel
Using Whisper-mode Surround
(press and hold)
≥“(( ))” lights when there is effect.
Each time you press and hold the button:
WHISPER-MODE SRD ON
↕WHISPER-MODE SRD OFF
PL
PL
SOUND
-W.S.
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 30  Thursday, December 13, 2007  9:04 AM