Panasonic Sc Pt465ee K Operating Instructions

							11
Simple Setup
Cable connections / AC mains lead connection / Preparing the remote control
11
RQTX0088
Conserving power
The main unit consumes a small amount of power, even when it is in 
standby mode (approx. 0.4 W). To save power when the unit is not to be 
used for a long time, unplug it from the household AC mains socket.
You will need to reset some memory items after plugging in the main 
unit.[Note]
The included AC mains lead is for use with the main unit only. Do not use 
it with other equipment. Also, do not use cords for other equipment with 
the main unit.
∫Batteries
≥Do not use rechargeable type batteries.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct 
sunlight for a long period of time with doors and windows closed.
Do not:≥mix old and new batteries.
≥use different types at the same time.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can 
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a 
long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control signal sensor (➜ 15), avoiding obstacles, 
at a maximum range of 7 m directly in front of the unit.
Other audio connections
TV or external 
equipment terminalCable required
(not included)Main unit terminal Features
Optical digital audio cable
≥Do not bend sharply when 
connecting.[\\\\\OPTICAL\IN\\\\\\]This unit can decode the surround signals received 
through the set top box, digital broadcasting or satellite 
broadcasts. Refer to your equipment’s operating 
instructions for details. Only Dolby Digital and PCM can 
be played with this connection.
≥After making this connection, make settings to suit the 
type of audio from your digital equipment (➜ 32).
step
4AC mains lead connection
OPTICAL OUTOPTICAL 
I
N
AC IN
110 127V220 240V
VOLT ADJ
To household 
mains socket AC mains lead (included) Main unit
Use a flat-head screwdriver to 
move the voltage selector to the 
appropriate position for the area 
in which this system is used.
[PT465]
Before connecting the AC mains 
lead
Set the voltage.
[Saudi[Arabia[and[Kuwait]
BE SURE TO READ THE CAUTION FOR THE AC 
MAINS LEAD ON PAGE 4 BEFORE 
CONNECTION.
step
5Preparing the remote control
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
R6/LR6, AA


Insert so the poles (i and j) match those in the remote control.
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 11  Thursday, December 13, 2007  9:04 AM
 
						

							12
Simple Setup
Performing QUICK SETUP
RQTX0088
The QUICK SETUP screen assists you to make necessary settings.
∫Details of settings
≥Underlined items are the factory settings in the above table.
§ Language options
[The[Middle[East,[South[Africa,[Saudi[Arabia[and[Kuwait]: FRANÇAIS, ESPAÑOL, DEUTSCH, PУCCKИЙ, MAGYAR, ÇESKY and POLSKI
[Southeast[Asia[and[Thailand]: 繁體中文
[Australia[and[N.Z.]: FRANÇAIS, ESPAÑOL, DEUTSCH, ITALIANO, SVENSKA, NEDERLANDS and POLSKI
step
6Perfor ming QUICK SETUP
Preparation
Turn on your TV and select the appropriate 
video input mode (e.g. VIDEO 1, AV 1, HDMI, 
etc.).
≥To change your TV’s video input mode, refer to 
its operating instructions.
≥This remote control can perform some basic 
TV operations (➜ 14).
-SLEEP-REPEAT-FL DISPLAY
-KARAOKE-RETURN
-PLAY MODE
MUTINGSUBWOOFER-CH SELECTSETUPSOUND
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PAUSE STOP
SKIP
123
456
789
0
10CANCEL
VOL
ONE TOUCH PLAY
FM/EXT-IN
TV/AVVOLiPod/USB
DVD
-W.S.
PL
TV
LEVEL
OK
-ECHO-FUNCTIONSPT465PT460-RETURN-KARAOKERETURN
SETUPDVD
OK
1Turn on the unit.
2Select “DVD/CD”.
3Show the setup menu.
4Select “OTHERS”.
5Select “QUICK SETUP”.
6Select “SET”.
7Select “YES”.
e.g.
8Follow the messages 
and make the settings.
≥MENU LANGUAGE
≥TV TYPE
≥TV ASPECT
To return to the previous screen, press 
[-RETURN] ([PT460]: [RETURN]).
9Finish QUICK SETUP.
10Exit.
DVD
SETUP
SET
MAINDISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
EXIT : SETUP RETURN
OK
OK
OK
OK
SET
RETURN
OTHERSQUICK  SETUPSELECT  THE  MENU  LANGUAGE.ENGLISH
FRANÇAIS 
ESPAÑOL
DEUTSCH
P
MAGYAR
CESKY
POLSKI
OK
OK
SETUP
MENU LANGUAGEChoose the language for the 
on-screen messages.≥ENGLISH≥(Language options)§
TV TYPESelect to suit the type of TV.≥STANDARD
≥CRT≥LCD
≥PROJECTION≥PLASMA
TV ASPECTChoose the setting to suit your TV 
and preference.≥4:3PAN&SCAN
≥4:3LETTERBOX≥4:3ZOOM
≥16:9NORMAL≥16:9SHRINK≥16:9ZOOM
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 12  Thursday, December 13, 2007  9:04 AM
 
						

							13
Simple Setup
Presetting the radio stations
RQTX0088
[PT465] Up to 30 stations can be set.
[PT460] Up to 30 stations can be set in each band, FM and AM.
≥“SET OK” is displayed when the stations are set, and the radio tunes 
to the last preset station.
≥“ERROR” is displayed when automatic presetting is unsuccessful. 
Preset the stations manually (➜ 26).≥The FM ([PT460]: FM/AM) setting is also shown on the TV display.
∫If noise is excessive
When “FM” is selected
Press and hold [-PLAY MODE] (main unit: [—FM MODE]) to 
display “MONO”.
Press and hold the button again to cancel the mode.
≥The mode is also cancelled when you change the frequency.
[PT460] When “AM” is selected
Press [FUNCTIONS] on the remote control.Each time you press the button: BP 2()BP 1
step
7Presetting the radio stations
Presetting stations automatically
1[PT465] Select “FM”.
[PT460] Select “FM” or “AM”.
≥Main unit:
Press [SELECTOR].
2
(press and hold)Release the button when 
“FM AUTO” or [PT460] “AM AUTO” is 
displayed.
≥Main unit:
Press and hold [MEMORY].
The tuner tunes to the lowest 
frequency and starts to preset all 
the stations it can receive into the 
channels in ascending order.
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECTSETUP SOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PAUSE STOP
SKIP
123
456
789
0
10CANCEL
VOL
ONE TOUCH PLAY
FM/EXT-IN
TV/AVVOLiPod/USB
TVDVD
-W.S.
PL
OK
-KARAOKE-RETURN
-ECHO-FUNCTIONS
FM/EXT-INFM/AMEXT-IN
PT460PT465
OK ,
-PLAY MODE
PT460
FUNCTIONS
Numbered
buttons
SELECTOR
TUNE
MEMORY
-TUNE MODE/—FM MODE
FM/EXT-IN
[PT460]
[PT465]FM/AMEXT-IN
OK
Confirming the preset channels
1[PT465] Select “FM”.
[PT460] Select “FM” or “AM”.
≥Main unit:
Press [SELECTOR].
2Select the channel.
≥To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X,W].
≥Main unit:
Press [-TUNE MODE] to select 
“PRESET” on the display, and 
then press [XTUNEW] to select 
the channel.
When a stereo FM broadcast is 
being received, “ST” lights in the 
display.
FM/EXT-IN
[PT460]
[PT465]FM/AMEXT-IN
123
456
789
0
10
ST
MONO
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 13  Thursday, December 13, 2007  9:04 AM
 
						

							14
Control reference guide
RQTX0088
Other Panasonic audio/video equipment may start functioning when you 
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control 
operating mode to “REMOTE 2”.The main unit and remote control must be set to the same mode.
1 Press and hold [9/5] on the main unit and [2] on the remote 
control until the main unit’s display shows “REMOTE 2”. 
2 Press and hold [OK] and [2] on the remote control for at least 2 seconds.To change the mode back to “REMOTE 1”, repeat both steps above by 
replacing [2] with [1].
-SLEEP-REPEAT-FL DISPLAY-PLAY MODE
OK
MUTINGSUBWOOFER
-CH SELECT
SETUP
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PAUSE STOP
SKIP
123
456
789
0
10CANCEL
VOL
ONE TOUCH PLAY
FM/EXT-IN
TV/AVVOLiPod/USB
DVD
-W.S.
PL
114
15
16
17
18
20
21
22
24
19
2
3
4
5
6
7
8
9
1110
12
23
25
TV13
SOUND
-RETURN
LEVEL
-KARAOKE
-ECHO-FUNCTIONS
FM/AMEXT-IN
FUNCTIONSRETURNPT460PT460
PT460
1Turn the main unit on/off (➜ 12)
2Select channels and title numbers etc. / Enter numbers
(➜ 13, 17)
3Cancel (➜ 18)
4Select preset radio stations (➜ 13)
5Basic operations for play (➜ 16, 17)
6Show a disc top menu or program list (➜ 17, 19)
7Select or confirm menu items / Frame-by-frame  (➜ 17)
8Show a disc menu or play list (➜ 17, 19)
9Show on-screen menu (➜ 20) /
[PT465] Adjust echo level (➜ 27)
:Turn Dolby Pro LogicII on/off (➜ 30)
;Show setup menu (➜ 12)
Select disc as the source (➜ 12)
?Select USB or iPod as the source (➜ 32, 33)
@Select FM tuner (
[PT460]: FM/AM tuner) or external audio as 
the source (➜ 13, 32)
[PT465]
FM#AUX#D-IN
^---------------------}
[PT460]
FM#AM#AUX#D-IN
^--------------------------------}
AStart up and play a disc automatically (➜ 17, 28)
BAdjust the volume of the main unit
CSelect radio stations manually (➜ 26)
DShow START menu (➜ 15)
EReturn to previous screen (➜ 17) /
[PT465] Show Karaoke mode on-screen menu (➜ 27)
FSwitch information on the main unit’s display (➜ 17)
or
Set the Sleep timer
Press and hold [—SLEEP].While the time is shown on the main unit’s display, press [—SLEEP] 
repeatedly.
SLEEP 30#SLEEP 60#SLEEP 90#SLEEP120
^----------------------OFF (Cancel)(-----------------------}
≥To confirm the remaining time, press and hold the button again.
GSelect the play mode / Set the repeat mode (➜ 18)
HMute the sound≥“MUTING” flashes on the main unit’s display while the function is 
on.
≥To cancel, press the button again or adjust the volume.
≥Muting is cancelled when you switch the unit to standby.
IAdjust the subwoofer level or select speaker channel 
(➜ 31)
Avoiding interference with other Panasonic equipment
Control reference guide
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 14  Thursday, December 13, 2007  9:04 AM
 
						

							15
Control reference guide / Utilising the START menu
15
RQTX0088
You can select desired source or access playback/menus by using the 
START menu.
When “Input Selection” is selectedYou can select a desired source from the menu.
≥DVD/CD (➜ 12), FM (➜ 13), [PT460] AM (➜ 13), AUX§ (➜ 32), 
DIGITAL IN§ (➜ 32), USB (➜ 32), iPod (➜ 33) § “(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV audio 
setting for VIERA Link “HDAVI Control” (➜ 28).
Press [3,4], then press [OK] to make the settings.When a disc is loaded or an USB device is connected, you can also 
access playback or menus from the START menu.
e.g. [DVD-V]
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
VOLUME
13141516
SELECTOR TUNEMEMORYTUNE MODE FM MODEAC INSW
BOOST
12345678
OPENCLOSE
MIC VOL
1210119PT465PT465
1Standby/on switch [Í/I]
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a small 
amount of power. (➜ 16)
2This indicator lights when the unit is connected to the AC 
mains supply.
3Open/Close the disc tray (➜ 16)
4Turn Subwoofer Boost on/off (➜ 31)
5Select the source
[PT465]
DVD/CD#USB#FM#AUX#D-IN#IPOD
^-------------------------------------------------------------------}
[PT460]
DVD/CD#USB#FM#AM#AUX#D-IN#IPOD
^-----------------------------------------------------------------------------}
6Skip or slow-search play  / Select the radio stations 
(➜ 13, 16)
7Stop playing  /  Select the tuning mode / Adjust the FM 
reception condition (➜ 13, 16)8Play discs  /  Memorize the receiving radio stations
(➜ 16, 26)
9Connect iPod (➜ 33)
:[PT465] Connect microphones (➜ 27)
;Connect USB device (➜ 32)
Display
?Adjust the volume of the main unit
@Connect headphones (not included)
Headphone plug type: ‰3.5 mm stereo mini plug
≥Reduce the volume before connecting.
≥Audio is automatically switched to 2-channel stereo.
≥To prevent hearing damage, avoid listening for prolonged periods of 
time.
Excessive sound pressure from earphones and headphones can 
cause hearing loss.
Utilising the START menu
1Show the START menu.e.g.
2Select an item.≥To exit press [START].
START
DVD/CD Home Cinema
OK
RETURN
Input Selection
OK
DVD/CD Home Cinema
OK
RETURN
Input Selection Playback Disc
TOP  MENU (DVD)
MENU (DVD)
Playback/menu 
access
SEARCHRETURN SEARCH
PLAYPAUSE
STOP
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 15  Thursday, December 13, 2007  9:04 AM
 
						

							16
Basic play
RQTX0088
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode.
[Note]
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED. To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are 
finished with the menus.
≥Total title number may not be displayed properly on iR/iRW.
Using the main unit
VOLUME
TUNEMEMORYOPENCLOSE
SELECTOR12
3
45
, +  VOLUME
Start play.
≥Tu r n  [`, i VOLUME] to 
adjust the volume.
≥You can enjoy surround 
sound when you press 
[ÎPLII] on the remote 
control to turn on Dolby Pro 
LogicII (➜ 30). (Stop)
Select “DVD/CD”. Turn on the unit.
Press to skip.
Press and hold to
– search during play
– start slow-motion play during 
pause
≥Press [1] (Play) to start normal 
play.
Open the disc tray.
Load the disc.
≥Load double-sided discs 
so the label for the side 
you want to play is facing 
up.
≥For DVD-RAM, 
remove the disc from 
its cartridge before 
use.
Label facing up
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 16  Thursday, December 13, 2007  9:04 AM
 
						

							17
Basic play
RQTX0088
If you are experiencing problems, refer to troubleshooting (➜36 to 38).
Using the remote control
One touch 
playThe main unit automatically turns 
on and starts playing the disc in 
the tray.
Stop
The position is memorised while 
“RESUME STOP” is on the screen.
≥Press [1PLAY] to resume.
≥Press [∫STOP] again to clear 
the position.
Pause
≥Press [1PLAY] to restart play.
Skip
Search(during play)
≥Up to 5 steps.
≥Press [1PLAY] to start normal 
play.
Slow-motion(during pause)
≥[VCD] Slow-motion: Forward 
direction only.
≥[MPEG4] [DivX] 
Slow-motion: Does 
not work.
Frame-by-
frame
(during pause)
[DVD-VR] [DVD-V] [VCD]
≥[DVD-VR] [VCD] Forward direction 
only.
12
5
MENU, PLAY LIST
,SKIP
STOP,     PAUSE
+,    VOL
TOP MENU,
DIRECT NAVIGATOR
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECTSETUP SOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PA U S E STOP
SKIP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
TV/AVVOLiPod/USB
TVDVD
-W.S.
PL
OK
ONE TOUCH  PLAY
-FL DISPLAY
SLOW/SEARCH,
ONE TOUCH PLAY
OK-RETURN-KARAOKE
-ECHO-FUNCTIONSPT465PT460-RETURN-KARAOKERETURN
Numbered
buttons
ONE TOUCH  PLAY
STOP
PAUSE
SKIP—
SLOW/SEARCH
OK
On-screen 
item select
Select
Confirm
Enter 
number
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12:
[S10] ➜ [1] ➜ [2]
[VCD] with playback control
Press [∫STOP] to cancel the PBC 
function, and then press the 
numbered buttons.
[DVD-V]
Shows a disc top menu.
[DVD-VR]
Press the button to show the 
programs (➜ 19).
Disc menu
[DVD-V]
Shows a disc menu.
[DVD-VR]
Press the button to show a play list 
(➜ 19).
[VCD] with playback control
Shows a disc menu.
Return to 
previous 
screen
Main unit 
display
[DVD-VR] [DVD-V] [WMA] [MP3] 
[MPEG4] [DivX]
Time display
,-. Information display
(e.g. [DVD-VR] Program 
number)
[JPEG]
SLIDE
,-.Contents number
OK—
123
456
789
0
10
TOP MENU
DIRECTNAVIGATOR
MENU
PLAY
LIST
-RETURN-KARAOKE
[PT460] [PT465]RETURN
-RETURN-KARAOKE
[PT460] [PT465]RETURN
—
-SLEEP-FL DISPLAY
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 17  Thursday, December 13, 2007  9:04 AM
 
						

							18
Other playback functions
RQTX0088
Other playback functions
This works only when the elapsed play time can be displayed. It also 
works with all JPEG content.
Items shown differ depending on the type of disc and playback mode.Preparation
≥[DVD-VR] Select “DATA” in “DVD-VR/DATA” (➜ 25, “OTHERS” menu) to 
play WMA, MP3, JPEG, MPEG4 or DivX contents.
≥If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE” or 
“VIDEO” (➜ 19, Using PLAYBACK MENU), then proceed with the 
above.
≥For a disc with both WMA/MP3 and JPEG contents, select either music 
or picture contents.
WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC RANDOM”.
JPEG: Select “PICTURE PROGRAM” or “PICTURE RANDOM”
≥[DVD-V] Some items cannot be played even if you have programmed 
them.
To select all the items
Press [3,4] to select “ALL” and press [OK].
To clear the selected program
1 Press [1] and then press [3,4] to select the program.
2 Press [CANCEL].
To clear the whole program
Press [1] several times to select “CLEAR ALL”, and then press [OK]. 
The whole program is also cleared when the disc tray is opened, the unit 
is turned off or another source is selected.
Repeat play
1During play
(press and hold)Show the repeat mode.
2While the repeat 
mode is displayedSelect an item to be repeated.e.g. [DVD-V]
`TITLE ---. `CHAP. ---. `OFF
^----------------------------------------------------b
≥To cancel, select “OFF”.
CANCEL
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECTSETUP SOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PAUSE STOP
SKIP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
TV/AVVOLiPod/USB
TVDVD
-W.S.
PL
OK
ONE TOUCH PLAY
PLAY STOP
—REPEAT -PLAY MODE
OK-RETURN-KARAOKE
-ECHO-FUNCTIONSPT465PT460-RETURN-KARAOKERETURN
-REPEAT-PLAY MODE
-REPEAT-PLAY MODE
Program and Random play
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]
While stoppedSelect the play mode.Program and random playback screens 
appear sequentially.
Program ------------------------------------------) Random
^--- Exit program and random screens (}
Program play (up to 30 items)
1Select an item.e.g. [DVD-V]
≥Repeat this step to program other items.
≥To return to the previous menu, press 
[-RETURN] ([PT460]: [RETURN]).
2Start play.
Random play
1(Only when the disc has groups or multiple 
titles.)
Select a group or title.e.g. [DVD-V]
≥“¢” represents selected. To deselect, press 
[OK] again.
2Start play.
-REPEAT-PLAY MODE
OK
DVD-V  PROGRAM
SELECT TITLETITLE CHAP.
TITLE  1
TITLE  2
TITLE  3
TITLE  41
2
3
4
5
6
7
8
9
10
START:PLAY
CLEAR ALL
PLAY
OK
DVD-V  RANDOM
SELECT  TITLE
TITLE  1
TITLE  2
TITLE  3
PRESS PLAY TO START
PLAY
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 18  Thursday, December 13, 2007  9:04 AM
 
						

							19
Using navigation menus
RQTX0088
Using navigation menus
≥[DVD-VR] Select “DATA” in “DVD-VR/DATA” (➜ 25, “OTHERS” menu) to 
play WMA, MP3, JPEG, MPEG4 or DivX contents.
“PLAYBACK MENU” screen appears when the disc contains both video 
(MPEG4/DivX) and other format (WMA/MP3/JPEG).
You can select to play from your desired item while the “DATA-DISC” 
screen is displayed.
e.g.
≥To display/exit the screen, press [MENU].
Play starts from the selected content.
∫Selecting the picture in Thumbnail menu
[JPEG]
To go to other group
1 Press [3] to select the group name.
2 Press [2,1] to select the group and press [OK].
≥Titles appear only if the titles are recorded on the disc.
≥You cannot edit programs, play lists and disc titles.
This works only when the disc contains a play list.
Playing data discs
[WMA] [MP3] [JPEG] [MPEG4] [DivX]
Using PLAYBACK MENU
Select “AUDIO/PICTURE” or “VIDEO”.≥To start play, press [1PLAY].
≥To select an item to play, refer “Playing from 
the selected item” (➜below).
Playing from the selected item
Select an item.≥To return to the previous screen, press 
[-RETURN] ([PT460]: [RETURN]). 
≥Maximum: 12 characters for file/folder name.
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECTSETUP SOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PA U S E STOP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
-W.S.
PL
OK
ONE TOUCH PLAY
STOP
TOP MENU,
DIRECT NAVIGATOR
MENU,
PLAY LIST
OK
PLAY
,SKIP
-RETURN
SKIP
-KARAOKE
-ECHO-FUNCTIONSPT465PT460-RETURN-KARAOKERETURN
OK
PLAYBACK  MENU
WMA/MP3/JPEG
MPEG4/DivXAUDIO/PICTURE
VIDEO
OK
DATA-DISC
ROOT
Perfume
My favorite1
My favorite2
My favorite3
Underwater
Fantasy planet
City of cascade
Infinite unitLady Starfish
Metal Glue
Life on Jupiter
Starpersons1
Starpersons2
OK
RETURN
Group (Folder):
Content (File):
: WMA/MP3
: JPEG
: MPEG4/DivX
OK
1While a picture is 
displayede.g.
2Select a picture.≥Press [:,9SKIP] to skip page by 
page.
Playing RAM and DVD-R / -RW (DVD-VR) discs
[DVD-VR]
Playing the programs
1While stoppede.g.
≥To exit the screen, press [DIRECT 
NAVIGATOR].
2Select the program.≥Press [2,1] to skip page by page.
Playing a play list
1While stoppede.g.
≥To exit the screen, press
 [PLAY LIST].
2Select the play list.≥Press [2,1] to skip page by page.
TOP MENU
DIRECTNAVIGATOR
JPEG  images G 1/  1:C  3/  9
Group nameGroup and content 
number
OK
TOP MENU
DIRECTNAVIGATOR
PG
DATELENGTH
TITLE
1
0:16:02 10/11
LIVE CONCERT
02:15
2
0:38:25 12/05
AUTO ACTION
3
1 : 16: 05 04/03
CINEMA
02:10 01:30
OK
RETURN
OK
MENU
PLAY
LISTPL
DATELENGTH
TITLE
1
0:00:10 11/11
CITY PENGUIN
00:01
2
0 : 01: 20 12/01
FOOTBALL
3
1 : 10: 04 01/02
SPECIAL
01:10 01:20
OK
RETURN
OK
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 19  Thursday, December 13, 2007  9:04 AM
 
						

							20
Using on-screen menus
RQTX0088
Using on-screen menus
∫Menu 1 (Disc/Play)
CANCEL
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECTSETUP SOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
START
PLAY
LIST
SLOW/SEARCH
PLAY PA U S E STOP
SKIP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
TV/AVVOLiPod/USB
TVDVD
-W.S.
PL
ONE TOUCH PLAY
OKOK
PLAY
-RETURN-KARAOKE
-ECHO-FUNCTIONSPT465PT460-RETURN-KARAOKERETURNPT465PT460
-ECHO-FUNCTIONSFUNCTIONS
Numbered
buttons
1Show the on-screen 
menu.
Each time you press the button:
Menu 1 (Disc/Play)
Menu 2 (Video)
Menu 3 (Audio)
[PT465] Menu 4 (Karaoke)
Menu 5 (HDMI)
Exit
2Select the item.
3Make the settings.
4Exit.
-ECHO-FUNCTIONS[PT460]
[PT465]
FUNCTIONS
T1C1
1:ENG
3/2.1 :EOFF
TITLE  SEARCH
Current item
Item name e.g. Menu 1 (Disc/Play) [DVD-V]
OK
T1C1
1:ENG
3/1  OFF
CHAPTER  SEARCH
Current setting e.g. Menu 1 (Disc/Play) [DVD-V]
OK
-RETURN-KARAOKE
[PT460]
[PT465]RETURN
Items shown differ depending on the type of disc.
TRACK SEARCH
TITLE SEARCH
CONTENT SEARCH
CHAPTER SEARCH
PG SEARCH
PL SEARCHTo start from a specific item
≥[VCD] This does not work when using playback 
control.
e.g. [DVD-V] : T2 C5
To select numbers for data disc
e.g. 123: [S10] ➜ [1] ➜ [2] ➜ [3] ➜ [OK]
AUDIO
[DVD-V] [DivX] (with multiple soundtracks)
To select audio soundtrack
[DVD-VR] [VCD]
To select “L”, “R”, “L+R” or “L R”
Signal type/data
LPCM/PPCM/ÎD/DTS/MP3/MPEG: Signal type
kHz (Sampling frequency)/bit/ch (Number of 
channels)
≥[DivX] It may take some time for play to start if 
you change the audio on a DivX video disc.
3/2 .1ch
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right).1: Low frequency effect(not displayed if there is no signal)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter e.g.
PLAY SPEED
[DVD-VR] [DVD-V]
To change play speed
– from “k0.6” to “k1.4” (in 0.1-unit steps)
≥Press [1PLAY] to return to normal play.
≥After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to 
48 kHz.
≥This function may not work depending on the 
disc’s recording.
REPEAT MODE
(➜ 18, Repeat play)
A-B Repeat (To repeat a specified section)Except [JPEG] [MPEG4] [DivX] [DVD-VR] (Still picture 
part) [VCD] (SVCD)
Press [OK] at the starting and ending points.
≥Select “OFF” to cancel.
SUBTITLE
[DVD-V] [DivX] (with multiple subtitles) 
[VCD] (SVCD only)
To select subtitle language
≥On iR/iRW, a subtitle number may be shown 
for subtitles that are not displayed.
[DVD-VR] (with subtitle on/off information)
To select “ON” or “OFF”
≥This may not work depending on the disc.
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
PT465GC-GS-GCS-GCT-PT460GN_RQTX0088-B_eng.book  Page 20  Thursday, December 13, 2007  9:04 AM