Panasonic Sc Htb70 Owners Manual

							Operations
RQT976321
Depending on your preference, It is possible to turn off the 
3D surround effect and the clear-mode dialog effect.
While pressing and holding [SOUND] 
on the remote control, press and 
hold [VOLi] on the main unit for 
more than 4 sec.
While the setting is displayed, press 
[SOUND] to change the setting.
≥The setting changes each time [SOUND] is pressed.
≥The indicator for the selected setting blinks for 20 sec and 
then exits the setting mode.
≥This setting will be reset to on when the main unit is turned 
off.
≥When off is selected, the dialog effect level cannot be 
adjusted.
You can turn off dimmer mode and keep the LED 
indicators bright.
While pressing and holding [INPUT 
SELECTOR] on the remote control, press 
and hold [sVOL] on the main unit for 
more than 4 sec to turn off Dimmer mode.
≥The indicator for the current condition will turn brighter.
≥The setting is maintained until it is changed again.
≥Default setting of this function is on.
	To turn on dimmer mode, repeat the operation above.
After performing the operation, the indicator for the current 
condition will be dim.
∫Remote control code
When other Panasonic devices respond to this system’s 
remote control, change the remote control code on this 
system and the remote control.
Preparation≥Turn off all other Panasonic products.
≥Turn on the main unit.
Change the remote control code to code 2:
1 Aim the remote control at the main unit’s 
remote control sensor.
2 Press and hold [MUTE] and [ ] on the remote 
control for more than 4 sec.
≥All the indicators will blink for 10 sec when the code of 
this system is changed.
≥The setting is maintained until it is changed again.
	≥If the main unit does not operate after changing the code, 
repeat steps 1 and 2.
≥To change the remote control code to code 1, repeat the 
steps above, but replace 
[] with [INPUT SELECTOR]. 
∫To reduce the clear-mode dialog effect
When the dialog does not sound natural while the volume 
is set low, It is possible to reduce the dialog enhancing 
effect as follows:
While pressing and holding [SOUND] on the remote 
control, press and hold [sVOL] on the main unit for more 
than 4 sec.
≥All the indicators will blink once when the clear-mode dialog 
effect is reduced.
≥Even if clear-mode dialog effect is reduced, dialog effect 
level is still adjustable.
	To reset the setting, return to the factory preset. (>22)
∫To turn off the volume limitation
If a state of the lowered volume disturbs you every time 
the main unit turns on, for example, it is possible to turn 
off this function as follows:
While pressing and holding [MUTE] on the remote control, 
press and hold [VOLi] on the main unit for more than 
4sec.
≥All the indicators will blink once when the volume limitation 
is turned off.
	To reset the setting, return to the factory preset. (>22)3FGFSFODF
Using the Dolby Vir tual 
Speaker effect
“STANDARD” indicator blinks:
3D surround effect and clear-mode 
dialog effect is on.
“STEREO” indicator blinks:
3D surround effect and clear-mode 
dialog effect is off.
Dimmer mode
Others
SC-HTB65_70PPC_RQT9763-1P.book  Page 21  Thursday, February 7, 2013  4:24 PM 
						

							22RQT9763
Troubleshooting
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the 
solutions indicated in the following guide do not solve the problem, refer to “Customer Services Directory (United States 
and Puerto Rico)” on page 26 if you reside in the U.S.A. or Puerto Rico, or refer to “WARRANTY SERVICE” on page 27 
if you reside in Canada.
No power.≥Insert the AC power supply cord securely. (>17)
≥After turning the main unit on, if the indicators blink and 
the main unit immediately turns off, unplug the AC 
power supply cord and consult your dealer.
The remote control does not work properly.≥The battery is depleted. Replace it with a new one. 
(>7)
≥It is possible that the insulation sheet has not been 
removed. Remove the insulation sheet. (>7)
≥It may be necessary to set the code of the remote 
control again after changing the battery of the remote 
control. (>21)
≥Use the remote control within the correct operation 
range. (>7)
The “TV” indicator blinks.Remove the AC power supply cord and consult your 
dealer. If there are any other indicators blinking, be sure to 
inform your dealer about the blinking indicators.
The main unit is automatically switched to 
standby mode.
The main unit will automatically switch to standby mode 
when no signal is input and no operation is performed for 
approx. 30 minutes. (>17)
The color of the speaker angle indicator does 
not match the tilt of the main unit.
Change the speaker angle settings manually so that the 
indicator color matches the tilt.
1Press and hold [INPUT SELECTOR] on the main unit 
for more than 4 sec.
≥The speaker angle indicator blinks.2While the indicator is blinking, press [INPUT 
SELECTOR] on the main unit repeatedly to match 
the indicator color with the placement method.
≥Refer to “Step 1  Selecting the placement method” 
(>8) for the relation between color and tilt.
Pairing cannot be done.Check the Bluetooth® device condition.
The device cannot be connected.≥The pairing of the device was unsuccessful or the 
registration has been replaced. Try pairing the device 
again. (>17)
≥This system might be connected to a different device. 
Disconnect the other device and try pairing the device 
again.
The device is connected but audio cannot be 
heard through this system.
For some built-in Bluetooth® devices, you have to set the 
audio output to “SC-HTB70” or “SC-HTB65” manually. 
Read the operating instructions for the device for details.
The sound is interrupted.≥The device is out of the 10 m (33 ft) communication 
range. Bring the Bluetooth® device closer to the main 
unit.
≥Remove any obstacle between the main unit and the 
device.
≥Other devices that use the 2.4 GHz frequency band 
(wireless router, microwaves, cordless phones, etc.) are 
interfering. Bring the Bluetooth
® device closer to the 
main unit and distance it from the other devices.
≥Select “MODE1” for stable communication. (>20)
To return to the factory preset.
While the main unit is on, press [Í/I] on the main 
unit for more than 4 sec.
(All the indicators will blink twice when this 
system is reset.)
If this system does not operate as expected, 
returning the settings to the factory preset 
may solve the problem.
≥The remote control code will return to “1” when 
this system is returned to the factory preset. To 
change the remote control code, refer to page 
21.
General operation
Bluetooth®
SC-HTB65_70PPC_RQT9763-1P.book  Page 22  Thursday, February 7, 2013  4:24 PM 
						

							Reference
RQT976323
No sound (or image).≥Turn muting off. (>18)
≥Check the connections to the other device. (>15) 
≥Make sure that the received audio signal is compatible 
with this system. (>25)
≥Turn this system off and then on again.
≥If the connections are correct, there might be a problem 
with the cables. Redo the connections with different 
cables.
≥Check the audio output settings on the connected 
device.
The dual audio cannot be changed from main 
to secondary.
If the audio received from the connected device is not 
“Dolby Dual Mono” or the output setting is not “Bitstream”, 
the setting cannot be changed from this system. Change 
the setting on the connected device.
The volume is lowered when the main unit is 
turned on.
If the main unit is turned off with the volume setting in the 
greater half (above 50), the main unit will automatically 
lower the volume to the middle (50) when the main unit is 
turned on. (>21)
The dialog is too persistent or the dialog does 
not sound natural.
This system has a function to make the dialog stand out 
when the volume is low. (>21)
There is no audio.
The power of the main unit turns off 
automatically.
(When the main unit detects a problem, a safety measure 
is activated and the main unit automatically switches to 
standby mode.)
≥There is a problem with the amplifier.
≥Is the volume extremely high?
If so, lower the volume.
≥Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a few 
moments and then try to turn it on again.
If the problem persists, confirm the TV indicator and BD/
DVD indicator blink, turn this system off, remove the AC 
power supply cord and consult your dealer. Please be 
sure to remember the indicators that were blinking and 
inform the dealer.
Unit care
∫Clean this system with a soft, dry cloth≥When dirt is heavy, wring a cloth moistened in water 
tightly to wipe the dirt, and then wipe it with a dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this 
system.
≥Before using chemically-treated cloth, carefully read the 
instructions that came with the cloth.
∫To dispose or transfer this systemThis system may keep the user settings information in the 
main unit. If you discard the main unit either by disposal or 
transfer, then follow the procedure to return all the settings 
to the factory presets to delete the user settings. (>22, 
“To return to the factory preset.”)
≥The operation history may be recorded in the memory 
of the main unit.
Sound
Manufactured under license from Dolby Laboratories. 
Dolby, Pro Logic, and the double-D symbol are trademarks 
of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 
5,956,674; 5,974,380; 6,487,535 & other U.S. and 
worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together are 
registered trademarks & DTS Digital Surround and the DTS 
logos are trademarks of DTS, Inc. Product includes 
software.
© DTS, Inc. All Rights Reserved.
The Bluetooth
® word mark and logos are owned by the 
Bluetooth SIG, Inc. and any use of such marks by 
Panasonic Corporation is under license. Other trademarks 
and trade names are those of their respective owners.
SC-HTB65_70PPC_RQT9763-1P.book  Page 23  Thursday, February 7, 2013  4:24 PM 
						

							24RQT9763
Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below 
are displayed during normal operational conditions. They do not refer to the indications of a problem.
§1  The indicator for the current status remains lit.
§2  The indicator blinks only when [SOUND] is pressed for more than 4 sec and the audio format is PCM. Indicator Description
The indicator blinks for 10 sec.
≥When the Bluetooth
® communication is mode 1 (>20)
The indicator blinks for 20 sec.
≥When 3D surround effect and clear-mode dialog effect 
are on (>21)
≥When the dual audio setting is Main (>20)
≥When the auto gain control is on (>20)
The indicator blinks for 5 sec.
≥When the audio format is Dolby Digital (>20)
The indicator blinks for 5 sec.
≥When the audio format is DTS (>20)
The indicator blinks for 5 sec.
≥When the audio format is PCM
§2 (>20)
The indicator blinks for 10 sec.
≥When the Bluetooth
® communication is mode 2 (>20)
The indicator blinks for 20 sec.
≥When 3D surround effect and clear-mode dialog effect 
are off (>21)
≥When the dual audio setting is Secondary (SAP: 
Secondary Audio Program) (>20)
≥When the auto gain control is off (>20)
The indicators blink for 20 sec.
≥When the dual audio setting is Main and Secondary 
(>20)
The indicators blink for 10 sec.
≥When the remote control code is changed (>21)
The indicators blink once.
≥
When changing the setting (“To reduce the clear-mode 
dialog effect” and “To turn off the volume limitation”) (>21)The indicators blink twice.
≥When the main unit is reset (>22)
Bluetooth
® indicator blinks quickly.
≥When the main unit is ready for pairing
Bluetooth
® indicator blinks slowly.
≥When the main unit is waiting to connect 
Bluetooth
® indicator turns on.
≥When the main unit is connected with a Bluetooth® 
device
1
1
1
1
SC-HTB65_70PPC_RQT9763-1P.book  Page 24  Thursday, February 7, 2013  4:24 PM 
						

							Reference
RQT976325
Specifications
	1 Specifications are subject to change without notice.
2 Weight and dimensions are approximate.
3 Total harmonic distortion is measured by a digital spectrum 
analyzer.
AMPLIFIER SECTION
RMS Output Power: Dolby Digital Mode
Front ch
30 W per channel (6≠), 1 kHz, 10 % THD
Subwoofer ch
[HTB70]
60 W per channel (3≠), 100 Hz, 10 % THD
[HTB65]
30 W per channel (6≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power
[HTB70]120 W
[HTB65]90 W
FTC output power: Dolby Digital Mode
Front ch16 W per channel (6≠),
100 Hz to 16 kHz, 1 % THD
Subwoofer ch
[HTB70]28 W per channel (3≠),
65 Hz to 125 Hz, 1 % THD
[HTB65]15 W per channel (6≠),
65 Hz to 125 Hz, 1 % THD
Total FTC Dolby Digital mode power
[HTB70]60 W
[HTB65]47 W
TERMINAL SECTION
Digital audio input (TV)
Optical digital inputOptical terminal
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Audio Format
LPCM, Dolby Digital, DTS Digital Surround
Analog audio input
Audio inputPin jack
[HTB70]
IR Blaster
Terminal Type
3.5 mm (
1/8q)jack
USB Port For service use only.
SPEAKER SECTION
Front speakers (Built-in)
Ty p e2 way, 2 speaker system (Bass Reflex)
Woofer
5.7 cm (2
1/4q)Conetype
Tw e e t e r2.5 cm (1q) Semi-dome type
Subwoofer (Built-in)
[HTB70]
Ty p e1 way, 2 speaker system (Bass Reflex)
Woofer
8cm(3
1/8q)Conetypek2
[HTB65]
Ty p e1 way, 1 speaker system (Bass Reflex)
Woofer
8cm(3
1/8q)Conetype
GENERAL
Power consumption[HTB70] 20 W
[HTB65] 15 W
Power consumption in standby mode
Approx. 0.25 W
Power supplyAC 120 V, 60 Hz
Dimensions 
(WkHkD)950 mmk66 mmk105 mm
(37
6/16qk210/16qk42/16q)
Mass (Weight)[HTB70] Approx. 3.4 kg(7.5 lbs)
[HTB65] Approx. 3.2 kg(7.1 lbs)
For wall mounting
Dimensions 
(WkHkD)950 mmk105 mmk66 mm
(37
6/16qk42/16qk210/16q)
Mass (Weight)[HTB70] Approx. 3.4 kg(7.5 lbs)
[HTB65] Approx. 3.2 kg(7.1 lbs)
[HTB70]
With basic standsDimensions
(WkHkD)950 mmk79 mmk105 mm
(376/16qk32/16qk42/16q)
Mass (Weight)  3.45 kg(7.61 lbs)
With 30o standsDimensions
(WkHkD)950 mmk99 mmk11 3 m m
(376/16qk314/16qk47/16q)
Mass (Weight)3.45 kg(7.61 lbs)
With 80
o stands
Dimensions
(WkHkD)950 mmk11 8 m mk80 mm
(37
6/16qk410/16qk32/16q)
Mass (Weight)3.47 kg(7.65 lbs)
Operating temperature range
0
oC to r40oC (r32oF to r104oF)
Operating humidity range
20 % to 80 % RH (no condensation)
Bluetooth® SECTION
Bluetooth® system specification Version 3.0
Wireless equipment classification Class 2
Supported profilesA2DP
Frequency band2400 MHz to 2483.5 MHz
(Adaptive Frequency Hopping)
Operating distance10 m (33 ft) Line of Sight
SC-HTB65_70PPC_RQT9763-1P.book  Page 25  Thursday, February 7, 2013  4:24 PM 
						

							26RQT9763
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America, 
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Products Limited Warranty
Limited Warranty Coverage
(For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or 
workmanship, Panasonic Consumer Marketing Company of North America 
(referred to as “the warrantor”) will, for the length of the period indicated on 
the chart below, which starts with the date of original purchase (“warranty 
period”), at its option either (a) repair your product with new or refurbished 
parts, (b) replace it with a new or a refurbished equivalent value product, or 
(c) refund your purchase price. The decision to repair, replace or refund will 
be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During 
the “Parts” warranty period, there will be no charge for parts. This Limited 
Warranty excludes both parts and labor for non-rechargeable batteries, 
antennas, and cosmetic parts (cabinet). This warranty only applies to 
products purchased and serviced in the United States or Puerto Rico. This 
warranty is extended only to the original purchaser of a new product which 
was not sold “as is”.
Mail-In ServiceFor assistance in the U.S.A. and Puerto Rico in obtaining repairs, please 
ship the product prepaid to: 
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
[email protected]
Online Repair RequestTo submit a new repair request and for quick repair status visit our Web Site 
at www.panasonic.com/repair.
When shipping the unit, carefully pack, include all supplied accessories listed 
in the Owner’s Manual, and send it prepaid, adequately insured and packed 
well in a carton box. When shipping Lithium Ion batteries please visit our 
Web Site at www.panasonic.com/BatteryHandling
 as Panasonic is 
committed to providing the most up to date information. Include a letter 
detailing the complaint, a return address and provide a daytime phone 
number where you can be reached. A valid registered receipt is required 
under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or 
workmanship, and DOES NOT COVER normal wear and tear or cosmetic 
damage. The warranty ALSO DOES NOT COVER damages which occurred 
in shipment, or failures which are caused by products not supplied by the 
warrantor, or failures which result from accidents, misuse, abuse, neglect, 
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper 
maintenance, power line surge, lightning damage, modification, introduction 
of sand, humidity or liquids, commercial use such as hotel, office, restaurant, 
or other business or rental use of the product, or service by anyone other 
than a Factory Service Center or other Authorized Servicer, or damage that 
is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED 
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS 
WARRANTY. 
(As examples, this excludes damages for lost time, travel to and from the 
servicer, loss of or damage to media or images, data or other memory or 
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD 
OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or 
consequential damages, or limitations on how long an implied warranty lasts, 
so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other 
rights which vary from state to state. If a problem with this product develops 
during or after the warranty period, you may contact your dealer or Service 
Center. If the problem is not handled to your satisfaction, then write to the 
warrantor’s Consumer Affairs Department at the addresses listed for the 
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS 
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
As of October 2012
Product or Part Name Parts Labor
Home Theater Audio System 1 Year 1 Year
All included Accessories
(Except Non-Rechargeable Batteries)90 DaysNot
Applicable
Only Non-Rechargeable Batteries 10 DaysNot
Applicable
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature requests 
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, 
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855 
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all 
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone)  1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277 
The model number and serial number of this product can be 
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future 
reference.
MODEL NUMBER
SERIAL NUMBERUser memo:
DATE OF PURCHASE ______________________________
DEALER NAME ___________________________________
DEALER ADDRESS________________________________
_________________________________________________
TELEPHONE NUMBER _____________________________
SC-HTB65_70PPC_RQT9763-1P.book  Page 26  Thursday, February 7, 2013  4:24 PM 
						

							Reference
RQT976327
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use 
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product 
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your 
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Technics Audio Product - One (1) year, parts and labour
Panasonic BD/DVD Product - One (1) year, parts and labour
Panasonic Audio Receivers - One (1) year, parts and labour
Home Theater Systems Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic 
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in 
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original 
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR 
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE
 IS 
REQUIRED 
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal 
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or 
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, 
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of 
consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, 
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or 
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY 
EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from 
the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of 
items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, 
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty 
gives you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICEFor product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre: Telephone #: 1-800-561-5505
Fax #: (905) 238-2360
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
SC-HTB65_70PPC_RQT9763-1P.book  Page 27  Thursday, February 7, 2013  4:24 PM 
						

							Panasonic Corporation 2012
Printed in Malaysia One Panasonic Way, Secaucus, 
New Jersey 07094
http://www.panasonic.com
www.panasonic.ca5770 Ambler  Drive 
Mississauga, Ontario 
L4W 2T3 
Panasonic Consumer Marketing 
Company of North America, 
Division of Panasonic Corporation of 
North AmericaPanasonic Canada Inc.
RQT9763-1PF1212RK1013
About Bluetooth®
∫Frequency band usedThis system uses the 2.4 GHz frequency band.
∫Certification of this device≥This system conforms to frequency restrictions and has 
received certification based on frequency laws. Thus, a 
wireless permit is not necessary.
≥The action below are punishable by law in some countries:
jTaking apart or modifying the unit.
jRemoving specification indications.
∫Restrictions of use
≥Wireless transmission and/or usage with all Bluetooth® 
equipped devices is not guaranteed.
≥All devices must conform to standards set by Bluetooth 
SIG, Inc.
≥Depending on the specifications and settings of a device, it 
can fail to connect or some operations can be different.≥This system supports Bluetooth
® security features. But 
depending on the operating environment and/or settings, 
this security is possibly not sufficient. Transmit data 
wirelessly to this system with caution.
≥This system cannot transmit data to a Bluetooth
® device.
∫Range of useUse this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment, 
obstacles or interference.
∫Interference from other devices≥This system may not function properly and troubles such 
as noise and sound jumps may arise due to radio wave 
interference if the main unit is located too close to other 
Bluetooth
® devices or the devices that use the 2.4 GHz 
band.
≥This system may not function properly if radio waves from 
a nearby broadcasting station, etc. are too strong.
∫Intended usage≥This system is for normal, general use only.
≥Do not use this system near equipment or in an 
environment that is sensitive to radio frequency 
interference (example: airports, hospitals, laboratories, 
etc).
-If you see this symbol-Panasonic bears no responsibility for data 
and/or information that is compromised 
during a wireless transmission.
Information on Disposal in other Countries outside the 
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local 
authorities or dealer and ask for the correct method of 
disposal.
As an ENERGY STAR  Partner,  Panasonic has determined that
this product meets the ENERGY STAR  guidelines for energy efficiency.
®
®
For Canada only: The word “Participant” is 
used in place of the word “Partner”.
SC-HTB65_70PPC_RQT9763-1P.book  Page 28  Thursday, February 7, 2013  4:24 PM