Panasonic Sc Htb70 Owners Manual

							2012/12/21
PPCRQT9763-1P
Owner’s Manual
Home Theater Audio System
Model No. SC-HTB70
SC-HTB65
Thank you for purchasing this product.
Please read these instructions carefully before using this product,
and save this manual for future use.
Register online at www.panasonic.com/register
 (U.S. customers only) If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Canada: 1-800-561-5505
Included Installation InstructionsThe installation work should be done by a qualified installation specialist. (>9 to 14)
Before commencing work, carefully read these installation instructions and the operating instructions 
to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
SC-HTB65_70PPC_RQT9763-1P.book  Page 1  Thursday, February 7, 2013  4:24 PM 
						

							2RQT9763
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the 
unit and the applicable safety instructions listed below. Keep these operating instructions handy for 
future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as 
radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. 
A grounding-type plug has two blades and a third 
grounding prong. The wide blade or the third prong 
are provided for your safety. If the provided plug does 
not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or 
pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus.
11 Only use attachments/accessories specified by the 
manufacturer.
12 Use only with the cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, use 
caution when moving the cart/
apparatus combination to avoid injury 
from tip-over.
13 Unplug this apparatus during lightning storms or 
when unused for long periods of time.
14 Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.
Unit
≥To reduce the risk of fire, electric shock or product 
damage,
jDo not expose this unit to rain, moisture, dripping or 
splashing.
jDo not place objects filled with liquids, such as vases, 
on this unit.
jUse only the recommended accessories.
jDo not remove covers.
jDo not repair this unit by yourself. Refer servicing to 
qualified service personnel.
AC power supply cord≥The power plug is the disconnecting device.
Install this unit so that the power plug can be unplugged 
from the socket outlet immediately.
Button-type battery (Lithium battery)
≥Risk of fire, explosion and burns. Do not disassemble, 
heat above 60oC (140oF) or incinerate.
WARNING
DO NOT INGEST BATTERY,
CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the 
coin/button cell battery is swallowed, it can cause 
severe internal burns in just 2 hours and can lead to 
death. Keep new and used batteries away from 
children. If the battery compartment does not close 
securely, stop using the product and keep it away from 
children. If you think batteries might have been 
swallowed or placed inside any part of the body, seek 
immediate medical attention.
If any electrolyte should come into contact with your 
hands or clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your 
eyes, never rub the eyes. Rinse eyes thoroughly with 
water, and then consult a doctor.

This product contains a CR Coin Cell Lithium Battery 
which contains Perchlorate Material s special handling 
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
.
SC-HTB65_70PPC_RQT9763-1P.book  Page 2  Thursday, February 7, 2013  4:24 PM 
						

							RQT97633
Precautions
Unit
≥Do not place sources of naked flames, such as lighted 
candles, on this unit.
Placement
≥To reduce the risk of fire, electric shock or product 
damage,
jDo not install or place this unit in a bookcase, built-in 
cabinet or in another confined space. Ensure this unit 
is well ventilated.
jDo not obstruct this unit’s ventilation openings with 
newspapers, tablecloths, curtains, and similar items.
Button-type battery (Lithium battery)
≥Danger of explosion if battery is incorrectly replaced. 
Replace only with the type recommended by the 
manufacturer.
≥Keep out of reach of children.
≥Insert with poles aligned.
≥Mishandling of batteries can cause electrolyte leakage 
and may cause a fire.
jRemove the battery if you do not intend to use the 
remote control for a long period of time. Store in a 
cool, dark place.
jDo not heat or expose to flame.
jDo not leave the battery(ies) in a car exposed to 
direct sunlight for a long period of time with doors and 
windows closed.
jDo not touch the terminals (i and j) with metal 
objects.
jDo not recharge, disassemble, remodel, heat or 
throw into fire.
≥When disposing the batteries, please contact your local 
authorities or dealer and ask for the correct method of 
disposal.
‘
CAUTION
The lightning flash with arrowhead 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.
CAUTION:TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS 
INSIDE.
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE FOLLOWING APPLIES ONLY IN THE 
U.S.A.
FCC Note:
This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules.
These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause 
harmful interference to radio communications.
However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and 
receiver.
≥Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.
≥Consult the dealer or an experienced radio/TV 
technician for help.
Any unauthorized changes or modifications to this 
equipment would void the user’s authority to operate this 
device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, 
including interference that may cause undesired 
operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way,
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of 
North America
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY IN 
CANADA.
This device complies with RSS-GEN, RSS-210 of the IC 
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, 
including interference that may cause undesired operation 
of the device.
THE FOLLOWING APPLIES IN THE U.S.A. 
AND CANADA
This transmitter must not be co-located or operated in 
conjunction with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure 
limits set forth for an uncontrolled environment and meets 
the FCC radio frequency (RF) Exposure Guidelines in 
Supplement C to OET65 and RSS-102 of the IC radio 
frequency (RF) Exposure rules. This equipment has very 
low levels of RF energy that is deemed to comply without 
maximum permissive exposure evaluation (MPE). But it is 
desirable that it should be installed and operated keeping 
the radiator at least 20 cm (7
7/8q) or more away from 
person’s body (excluding extremities: hands, wrists, feet 
and ankles).
SC-HTB65_70PPC_RQT9763-1P.book  Page 3  Thursday, February 7, 2013  4:24 PM 
						

							4RQT9763
Table of contents
IMPORTANT SAFETY INSTRUCTIONS ............................................................  2
Before use
Supplied items ...................................................................................................  5
This system ................................................................................................................................  5
Accessories ................................................................................................................................  5
Control reference guide ....................................................................................  6
This system (Front).....................................................................................................................  6
This system (Rear) .....................................................................................................................  6
Remote control ...........................................................................................................................  7
Getting started
Step 1  Selecting the placement method .........................................................  8
The main unit ..............................................................................................................................  8
Wireless interference ..................................................................................................................  9
Step 2  Placement ............................................................................................  10
When placing the main unit in a rack or on a table...................................................................  10
When attaching the main unit to a wall .....................................................................................  12
Step 3  Connections ........................................................................................  15
Connection with the TV ............................................................................................................  15
Connection with other device ................................................................................................... 15
[HTB70] Using the IR Blaster......................................................................................................  16
AC power supply cord connection ............................................................................................  17
Bluetooth
® connection ..............................................................................................................  17
Operations
Using this system ............................................................................................  18
3D sound ..........................................................................................................  19
Sound modes ...........................................................................................................................  19
Advanced operations ......................................................................................  20
Reference
Troubleshooting ..............................................................................................  22
Unit care ...........................................................................................................  23
Indicator illumination ......................................................................................  24
Specifications ..................................................................................................  25
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO) ...................................................  26
Limited Warranty (ONLY FOR CANADA) .......................................................  27
About Bluetooth
®.............................................................................. Back cover
SC-HTB65_70PPC_RQT9763-1P.book  Page 4  Thursday, February 7, 2013  4:24 PM 
						

							Precautions
Reference
Getting started
Before use
Operations
RQT97635
#FGPSF
VTF
Supplied items
Check the supplied accessories before using this system.
	≥Product numbers are correct as of December 2012. These may be subject to change.
For U.S.A. and Puerto Rico:
To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 26.
For Canada: To order accessories, call the dealer from whom you have made your purchase.
≥The supplied AC power supply cord is for use with this system only.
Do not use it with other equipment. Also, do not use cords from other equipment with this system.
≥The illustrations shown may differ from your unit.
≥This Owner’s Manual is applicable to models SC-HTB70 and SC-HTB65.
Unless otherwise indicated, illustrations in this Owner’s Manual are of the model SC-HTB70.
≥Operations in this Owner’s Manual are described mainly with the remote control, but you can 
perform the operations on the main unit if the controls are the same.
This system
[HTB70] [HTB65]
∏Main unit (Speaker)
(SC-HTB70)∏Main unit (Speaker)
(SC-HTB65)
Accessories
[HTB70] [HTB65]
∏1 Remote control 
(with a battery)
(N2QAYC000083)∏1 AC power supply cord
(K2CB2CB00022)∏2 Safety holders
(RXA0260)
∏2 Screws
(Without washerk2:
XSN4+8FJK)∏2 Wall mount brackets
(RMQX1082-K)(ONLY FOR CANADA)
The enclosed Canadian French label 
sheet corresponds to the English 
display on the remote control and the 
side and rear of the main unit.
[HTB70]
∏1 IR Blaster
(K2ZZ02C00007)∏2 Basic stands
(RYQ1165-K)∏230
o stands
(RYQ1166-K)
∏280
o stands∏2 Screws
(With washerk2: XYN5+J14FJK)
(RYQ1167-K)
SC-HTB65_70PPC_RQT9763-1P.book  Page 5  Thursday, February 7, 2013  4:24 PM 
						

							6RQT9763
Control reference guide
1Standby/on switch (Í/I)Press to switch the unit from on to standby mode or 
vice versa. In standby mode, the unit is still 
consuming a small amount of power.
2 Adjust the volume of this system
3 Select the input source
“TV” ------------# “BD/DVD”
^-------- “”(------}
4 Speaker angle indicator (>8)
Angle 1: 0
o tiltSpeaker angle indicator lights green[HTB70] Angle 2: Tilted at 30o
Speaker angle indicator lights amber[HTB70] Angle 3: Tilted at 80o/90o
[HTB65] Angle 2: Tilted at 90o
Speaker angle indicator lights red5 Input selector indicators§1
ABluetooth® indicatorLights blue when the Bluetooth® device is the 
audio source
BTV indicatorLights green when the TV is the audio sourceCBD/DVD indicatorLights amber when the device connected to the 
BD/DVD terminal is the audio source
6 Sound mode indicators§1
DSTANDARD indicatorLights when STANDARD is the current sound 
mode
ESTADIUM indicator§2
Lights when STADIUM is the current sound 
mode
FMUSIC indicator§2
Lights when MUSIC is the current sound modeGCINEMA indicatorLights when CINEMA is the current sound mode
HNEWS indicatorLights when NEWS is the current sound modeISTEREO indicatorLights when STEREO is the current sound mode7 Remote control signal sensor (>7)
1 AC IN terminal (>17)
2[HTB70] Ir SYSTEM terminal
3 OPTICAL DIGITAL AUDIO IN (TV) terminal 
(>15)4 BD/DVD terminal (>15)
5 USB port (for service use only)
§1 The indicators will also blink in various conditions. (>24)
§2 The indicator blinks for 5 sec when the main unit detects an audio format.
To manually verify the current audio format and the corresponding indicators, refer to page 20 
(Audio format indicator).
This system (Front)
1
23
7
456
This system (Rear)
SC-HTB65_70PPC_RQT9763-1P.book  Page 6  Thursday, February 7, 2013  4:24 PM 
						

							Before use
RQT97637
1 Turn the main unit on or off (>18)
2 Adjust the dialog effect level (>18)
3 Adjust the output level of the subwoofer
(bass sound) (>18)
4 Adjust the volume of this system (>18)
5 Mute the sound (>18)
6 Select the input source (>18)
“TV” -----------# “BD/DVD”
^-------- “”(------}
7 Select the Bluetooth
® device as the source 
(>18)
8 Select the sound mode (>19)
“STANDARD” -----#“STADIUM” -----#“MUSIC”
^- “STEREO”( “NEWS”( “CINEMA”(}
Remote control
SOUND 
1
6
7 23
4
5
8
INPUT
SELECTOR
∫Before using for the first time
Remove the insulation sheet A.
∫To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥Set the button-type battery with its (i) mark 
facing upward.
≥Keep the button-type battery out of reach of 
children to prevent swallowing.


∫Remote control operation range
The remote control signal sensor is located on the main unit.
≥Use the remote control within the correct operation range.

B Remote control signal sensor
≥Operation range
Distance: Within approx. 7 m 
(23 ft) directly in front
Angle: Approx. 30
oleft and right
SC-HTB65_70PPC_RQT9763-1P.book  Page 7  Thursday, February 7, 2013  4:24 PM 
						

							8RQT9763
(FUUJOH
TUBSUFEStep 1  Selecting the placement method
≥Choose a placement method that suits you best.
The main unit
When attaching the main unit to a wallWhen placing the main unit in a rack or on a table
Angle 1: 0o tilt≥Speaker angle indicator lights green.
[HTB70][A] Raised by using the basic stands
Page 10
[HTB70]
 Angle 2: Tilted at 30o
≥Speaker angle indicator lights amber.
[B] 
Tilted by using 30o stands
Page 10
[HTB70]
 Angle 3: Tilted at 80o
≥Speaker angle indicator lights red.
[C]
 Tilted by using 80o stands
Page 10
[HTB70] Angle 3:
[HTB65]
 Angle 2:
Tilted at 90o
≥Speaker angle indicator lights red.Page 12
SC-HTB65_70PPC_RQT9763-1P.book  Page 8  Thursday, February 7, 2013  4:24 PM 
						

							Getting started
RQT97639
Precautions
	≥Keep the safety holders, screws and wall mount brackets out of reach of children to prevent swallowing.
≥The safety holder is to minimize the possibility of damage and harm, but it does not completely guarantee this effect.
≥Do not hold the main unit in one hand to avoid injury, you may drop the main unit when carrying it.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
To avoid interference, maintain the following distances between the main unit and other 
electronic devices that use the same radio frequency (2.4 GHz band).
	≥Do not use the main unit in a metal cabinet.
≥If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the main unit further away from 
the TV.
≥Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the main unit.
Safety Precautions
Professional installation is required.
The installation should never be done by any other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING 
DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.
≥Be sure to install the main unit as indicated within this Owner’s Manual.
≥Attach using techniques suited to the structure and materials of the installation location.
Caution≥This system is to be used only as indicated in these instructions. Failure to do so may lead to damage to the 
amplifier and/or the speaker, and may result in the risk of fire. Consult a qualified service person if damage has 
occurred or if you experience a sudden change in performance.
≥Do not attempt to attach the main unit to a wall using methods other than those described in this manual.
∫When placing the main unit in front of the TV
The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic 
Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D 
compatible TV.
≥If interference occurs, use a lower angle stand or place the main unit without a stand or move the 
main unit further away from the TV. If the TV still does not function correctly, try using it in a rack or in 
the wall mount position.
∫If the TV’s remote control sensor is blocked by the main unit
Try using the TV’s remote control from a different angle. If the problem persists, you can use the 
supplied IR Blaster to relay the signal to the TV. (>16)
≥Do not use the IR Blaster if the TV’s remote control sensor is not blocked by the main unit.
Wireless interference
AThe main unit
BWireless router, cordless phone and 
other electronic devices: 
Approx. 2 m (6
1/2 ft)B
A
SC-HTB65_70PPC_RQT9763-1P.book  Page 9  Thursday, February 7, 2013  4:24 PM 
						

							10RQT9763
Step 2  Placement
Supplied accessories
Additionally required accessories (commercially available)
≥Fall prevention cord .........................................................................................................................  k 2
≥Screw eyes (to attach the fall prevention cord) ................................................................................ k 2
	≥Use commercially available screws that are capable of supporting over 33 kg (72.8 lbs).
≥Use a cord that is capable of supporting over 33 kg (72.8 lbs) (with a diameter of about 1.5 mm (1/16q)).
Attach the cord to the main unit.
When placing the main unit in a rack or on a 
table
≥Place the main unit on a flat and horizontal surface.
[HTB70]
∏2 Basic stands
∏2 30
o stands
∏2 80
o stands∏2 Screws with 
washer
ACord
§
§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations, 
about 5 mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above).


SC-HTB65_70PPC_RQT9763-1P.book  Page 10  Thursday, February 7, 2013  4:24 PM