Panasonic Sc Htb370 Owners Manual
Have a look at the manual Panasonic Sc Htb370 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Getting started RQT977721 When placing the speakers on a table Horizontal placement Vertical placement ACord§ BScrew eye≥Depending on the placement of the speakers, the screwing position of the screw eye may differ. CWall DApprox. 150 mm (529/32q) § If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm ( 13/32q) apart from the tip, at an angle of 45o (as illustrated above). SC-HTB370PPC_RQT9777-1P_mst.book Page 21 Tuesday, January 29, 2013 11:48 AM
22RQT9777 Step 3 Connections ≥Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC power supply cord until all other connections are completed. You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. Connection with the TV ≥When you use the optical digital audio cable, insert the tip correctly into the terminal. AC INAUX DIGITAL AUDIO IN TV(OPT1)SPEAKERS/HAUT-PARLEURS OPTICAL OUT DIGITAL AUDIO IN TV(OPT1) TV Optical digital audio cable Connection with other devices High quality audio Standard quality audio AC INAUX DIGITAL AUDIO IN BD/DVD(OPT2)SPEAKERS/HAUT-PARLEURS OPTICAL OUT DIGITAL AUDIO IN BD/DVD(OPT2) e.g., Blu-ray Disc player TV Refer to the operating instructions of the respective devices for the optimal connection. Optical digital audio cable AC INAUXRL DIGITAL AUDIO IN SPEAKERS/HAUT-PARLEURS SPEAKERSDIGITAL AUDIO INAUXRL LR AUDIO OUT e.g., Set top box TV Audio cable Refer to the operating instructions of the respective devices for the optimal connection. SC-HTB370PPC_RQT9777-1P_mst.book Page 22 Tuesday, January 29, 2013 11:48 AM
Getting started RQT977723 Match the connector shape and connect to the terminals of the same color. ≥Connect only after all other connections are completed. ≥This system consumes a small amount of AC power (>31) even when it is turned off. In the interest of power conservation, if you will not be using this system for a long time, unplug it from the household AC outlet. Speaker cable connection ARED Right speaker connectorBWHITE Left speaker connector AC power supply cord connection CTo a household AC outletDAC power supply cord (supplied) Saving energy The main unit is designed to conserve its power consumption and save energy. ≥ The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. AC INAUX DIGITAL AUDIO IN SPEAKERS/HAUT-PARLEURS 66RL SPEAKERS/HAUT-PARLEURS 66RL AC INAUX DIGITAL AUDIO IN SPEAKERS/HAUT-PARLEURS AC IN SC-HTB370PPC_RQT9777-1P_mst.book Page 23 Tuesday, January 29, 2013 11:48 AM
24RQT9777 Preparation≥Turn on the main unit. Press [BÍ CI]. Active subwoofer on/off button [B Í C I] Use this button to turn the active subwoofer on and off. C I: The active subwoofer is on. B Í: The active subwoofer is off. The active subwoofer will still consume a small amount of power even when it is turned off (B, Í). Check that the wireless link is activated. WIRELESS LINK indicator Lights red: The wireless link is not activated. Lights green: The wireless link is activated. Blinks green: The active subwoofer is trying to activate the wireless link with the main unit. The wireless link will be activated when the main unit and the active subwoofer are both turned on. By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. Preparation≥Turn on the Bluetooth® feature of the device and place the device near the main unit. Press [ ] to select “ ”. ≥If the “ ” indicator flashes quickly, go to step 3. Press and hold [ ] until the “ ” indicator flashes quickly. ≥If the “ ” indicator flashes slowly, repeat step 2. Select “SC-HTB370” from the Bluetooth® device’s Bluetooth® menu. ≥If prompted for the passkey on the Bluetooth® device, enter “0000”. ≥Once the Bluetooth ® device is connected, the “ ” indicator stops flashing and lights up. Press [ ] to select “ ”. ≥If the “ ” indicator lights, a Bluetooth® device is already connected with this system. Disconnect it. (>below) Select “SC-HTB370” from the Bluetooth® device’s Bluetooth® menu. ∫Disconnecting a Bluetooth ® device Press and hold [ ] until the “ ” indicator flashes slowly. ≥When “ ” is selected as the source, this system will automatically try and connect to the last connected Bluetooth ® device. ≥The Bluetooth® device will be disconnected if a different audio source (e.g. “TV“) is selected. ≥Refer to the operating instructions of the Bluetooth ® device for further instruction on how to connect a Bluetooth® device. ≥This system can only be connected to one device at a time. ≥You can register up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the longest time will be replaced. ≥To change the sound quality, refer to “Bluetooth ® communication mode” on page 27. Active subwoofer wireless connectionBluetooth® connection Bluetooth® pairing Connecting a Bluetooth® device SC-HTB370PPC_RQT9777-1P_mst.book Page 24 Tuesday, January 29, 2013 11:48 AM
Getting started Operations RQT977725 0QFSBUJPOTUsing this system Preparation≥Turn on the active subwoofer. ≥Turn on the TV and/or connected device. Press [Í] to turn on the main unit. Select the source. ≥This remote control cannot be used to control the operations of the connected devices. ∫When “ ” is selected as the source On the Bluetooth® device:Select this system as the output source of the connected Bluetooth® device and start the playback. ∫When “BD/DVD” is selected as the source On the TV and the connected device:Select the TV’s input for the device connected to “BD/DVD” terminal and start the playback on the connected device. ∫When “AUX” is selected as the source On the TV and the connected device:Select the TV’s input for the device connected to “AUX” terminal and start the playback on the connected device. Adjust the volume and sound effect level. ∫To adjust the volume of this system Press [iVOLj].≥Volume range: 0 to 100§ ∫To adjust the dialog effect level This setting will change the level of the Clear- mode dialog effect. (>26) 1 Press [iDIALOG LEVELj] to display the current level. 2 While the level is displayed: Press [iDIALOG LEVELj] to adjust the level. ∫To adjust the subwoofer level 1 Press [iSUBWOOFERj] to display the current level. 2 While the level is displayed: Press [iSUBWOOFERj] to adjust the level. ≥The level indication pattern is the same as dialog effect level. ∫To mute the sound Press [MUTE].≥While muting, the sound mode indicators blink simultaneously. ≥To cancel, press the button again or adjust the volume. ≥Muting is canceled if the main unit is turned off. § The sound mode indicators blink from left to right (i) or from right to left (s) while adjusting. The indicators will not blink when it has reached the maximum or minimum. ≥If there is sound coming out of the TV’s speakers, reduce the volume of the TV to its minimum. ≥If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the volume to the middle (50) when the main unit is turned on (Volume limitation). To turn this function off, refer to page 28. PressTo select [INPUT SELECTOR]“TV”#“BD/DVD”#“AUX” ^----------- “”(---------} [] “ ” (Bluetooth ®) DIALOG LEVEL LINK MODE PAIRING----SOUNDINPUT SELECTOR IndicationEffect level 4Highest 3 2 1Lowest If this system does not operate as expected or sound is unusual, returning the settings to the factory preset may solve the problem. (>29) SC-HTB370PPC_RQT9777-1P_mst.book Page 25 Tuesday, January 29, 2013 11:48 AM
26RQT9777 3D sound This system provides a feeling that the sound and the image are as one. ≥To change the applied effect, refer to “Sound modes”. (>right) ≥To turn off Dolby Virtual Speaker and the 3D surround effects, select “STEREO” as the sound mode. (>right) ≥To turn off the 3D surround and the Clear-mode dialog effects, refer to “Using the Dolby Virtual Speaker effect”. (>28) By changing the sound mode, it is possible to enjoy the sound that is suitable to the TV program or image from the connected device. ∫To select the sound mode Press [SOUND]. “STANDARD” -----#“STADIUM” -----#“MUSIC” ^- “STEREO”( “NEWS”( “CINEMA”(} ≥The indicator for the selected sound mode lights. e.g., “STANDARD” The setting is maintained until it is changed again. 3D sound Dolby ® Virtual SpeakerWith this effect you can enjoy a surround sound effect similar to 5.1ch. 3D surround effect Adding to the Dolby Virtual Speaker effect, Panasonic has applied its own sound field controlling technology to expand the sound field forwards, backwards, upwards, and downwards, providing a sound with depth and force that better matches 3D images. Clear-mode dialog Sports commentary and dialogs from TV dramas are heard as if the sound is coming from the TV, giving the feeling that the sound and the image are one. Also, the dialog will stand out from the other sounds during normal volume playback and when the volume is lowered for night time viewing. e.g., Image of 3D sound field Sound modes Sound mode “STANDARD” (Factory preset)Produces a sound best suited for dramas and comedy shows. “STADIUM”Produces a highly realistic sound for live broadcasts of sports. “MUSIC”Re-creates the sound of musical instruments and songs with an expansive sound. “CINEMA”Produces a powerful, three- dimensional sound unique to movies. “NEWS”Enhances the voices of news and sports commentaries for clearer hearing. “STEREO”You can play any source in stereo. Dolby Virtual Speaker and 3D surround effects are turned off. SC-HTB370PPC_RQT9777-1P_mst.book Page 26 Tuesday, January 29, 2013 11:48 AM
Operations RQT977727 Advanced operations To display the current audio format. Press and hold [SOUND] for more than 4 sec. ≥The current audio format is indicated for 5 sec. Audio format is not indicated when “” or “AUX” is selected as the source. Change the dual audio from main to secondary. ≥This setting will only work if the audio output setting on the connected TV or player, etc. is set to Bitstream and dual audio is available in the audio source. Press and hold [MUTE] for more than 4 sec. While the setting is displayed, press [MUTE] to change the setting. ≥The setting changes each time [MUTE] is pressed. ≥The indicator for the selected setting blinks for 20 sec and then exits the setting mode. ≥The setting is maintained until it is changed again. With this function, you can prevent sudden loud sounds. The output will be reduced automatically when the input exceeds a certain level. Press and hold [INPUT SELECTOR] on the remote control for more than 4 sec. While the setting is displayed, press [INPUT SELECTOR] on the remote control to change the setting. ≥The setting changes each time [INPUT SELECTOR] is pressed. ≥The indicator for the selected setting blinks for 20 sec and then exits the setting mode. ≥The setting is maintained until it is changed again. You can select different modes to suit the type of connections with emphasis on connectivity or high quality audio. ≥Make sure that a Bluetooth ® device is already paired with this system. (>24) Press [ ] to select “ ”. ≥“” indicator will blink slowly. If the indicator lights, a Bluetooth® device is already connected with this system. Disconnect it. (>24) Press [ ] to display the current mode. While the mode is displayed, press [ ] to select the mode. ≥The setting changes each time [ ] is pressed. ≥The indicator for the selected setting blinks for 10 sec and then exits the setting mode. ≥The setting is maintained until it is changed again. Audio format indicator “STADIUM” indicator blinks: Dolby Digital is the audio format. “MUSIC” indicator blinks: DTS is the audio format. “CINEMA” indicator blinks: PCM is the audio format. Changing the dual audio “STANDARD” indicator blinks (A): Main (Factory preset) “STEREO” indicator blinks (B): Secondary (SAP: Secondary Audio Program) When A and B both blink: Main and secondary Auto gain control “STANDARD” indicator blinks: Auto gain control is on. “STEREO” indicator blinks: Auto gain control is off. (Factory preset) Bluetooth® communication mode “STANDARD” indicator blinks: MODE1 (Factory preset) Emphasis on connectivity “STEREO” indicator blinks: MODE2 Emphasis on audio quality SC-HTB370PPC_RQT9777-1P_mst.book Page 27 Tuesday, January 29, 2013 11:48 AM
28RQT9777 Depending on your preference, It is possible to turn off the 3D surround effect and the clear-mode dialog effect. While pressing and holding [SOUND] on the remote control, press and hold [VOLi] on the main unit for more than 4 sec. While the setting is displayed, press [SOUND] to change the setting. ≥The setting changes each time [SOUND] is pressed. ≥The indicator for the selected setting blinks for 20 sec and then exits the setting mode. ≥This setting will be reset to on when the main unit is turned off. ≥When off is selected, the dialog effect level cannot be adjusted. You can turn off dimmer mode and keep the LED indicators bright. While pressing and holding [INPUT SELECTOR] on the remote control, press and hold [sVOL] on the main unit for more than 4 sec to turn off Dimmer mode. ≥The indicator for the current condition will turn brighter. ≥The setting is maintained until it is changed again. ≥Default setting of this function is on. To turn on dimmer mode, repeat the operation above. After performing the operation, the indicator for the current condition will be dim. ∫Remote control code When other Panasonic devices respond to this system’s remote control, change the remote control code on this system and the remote control. Preparation≥Turn off all other Panasonic products. ≥Turn on the main unit. Change the remote control code to code 2: 1 Aim the remote control at the main unit’s remote control sensor. 2 Press and hold [MUTE] and [ ] on the remote control for more than 4 sec. ≥All the indicators will blink for 10 sec when the code of this system is changed. ≥The setting is maintained until it is changed again. ≥If the main unit does not operate after changing the code, repeat steps 1 and 2. ≥To change the remote control code to code 1, repeat the steps above, but replace [] with [INPUT SELECTOR]. ∫To reduce the clear-mode dialog effect When the dialog does not sound natural while the volume is set low, it is possible to reduce the dialog enhancing effect as follows: While pressing and holding [SOUND] on the remote control, press and hold [sVOL] on the main unit for more than 4 sec. ≥All the indicators will blink once when the clear-mode dialog effect is reduced. ≥Even if clear-mode dialog effect is reduced, dialog effect level is still adjustable. To reset the setting, return to the factory preset. (>29) ∫To turn off the volume limitationIf a state of the lowered volume disturbs you every time the main unit turns on, for example, it is possible to turn off this function as follows: While pressing and holding [MUTE] on the remote control, press and hold [VOLi] on the main unit for more than 4 sec. ≥All the indicators will blink once when the volume limitation is turned off. To reset the setting, return to the factory preset. (>29) Using the Dolby Virtual Speaker effect “STANDARD” indicator blinks: 3D surround effect and clear-mode dialog effect is on. “STEREO” indicator blinks: 3D surround effect and clear-mode dialog effect is off. Dimmer mode Others SC-HTB370PPC_RQT9777-1P_mst.book Page 28 Tuesday, January 29, 2013 11:48 AM
Reference Operations RQT977729 3FGFSFODFTroubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to “Customer Services Directory (United States and Puerto Rico)” on page 34 if you reside in the U.S.A. or Puerto Rico, or refer to “WARRANTY SERVICE” on page 35 if you reside in Canada. No power.≥Insert the AC power supply cord securely. (>23) ≥After turning the main unit on, if the indicators blink and the main unit immediately turns off, unplug the AC power supply cord and consult your dealer. The remote control does not work properly.≥The battery is depleted. Replace it with a new one. (>8) ≥It is possible that the insulation sheet has not been removed. Remove the insulation sheet. (>8) ≥It may be necessary to set the code of the remote control again after changing the battery of the remote control. (>28) ≥Use the remote control within the correct operation range. (>8) The “TV” indicator blinks.Remove the AC power supply cord and consult your dealer. If there are any other indicators blinking, be sure to inform your dealer about the blinking indicators. The main unit is automatically switched to standby mode. The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 30 minutes. (>23) Pairing cannot be done.Check the Bluetooth® device condition. The device cannot be connected.≥The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again. (>24) ≥This system might be connected to a different device. Disconnect the other device and try pairing the device again. The device is connected but audio cannot be heard through this system. For some built-in Bluetooth® devices, you have to set the audio output to “SC-HTB370” manually. Read the operating instructions for the device for details. The sound is interrupted.≥The device is out of the 10 m (33 ft) communication range. Bring the Bluetooth® device closer to the main unit. ≥Remove any obstacle between the main unit and the device. ≥Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth ® device closer to the main unit and distance it from the other devices. ≥Select “MODE1” for stable communication. (>27) No sound (or image).≥Turn muting off. (>25) ≥Check the connections to the other devices. (>22) ≥Make sure that the received audio signal is compatible with this system. (>30) ≥Turn this system off and then on again. ≥If the connections are correct, there might be a problem with the cables. Redo the connections with different cables. ≥Check the audio output settings on the connected device. The dual audio cannot be changed from main to secondary. If the audio received from the connected device is not “Dolby Dual Mono” or the output setting is not “Bitstream”, the setting cannot be changed from this system. Change the setting on the connected device. The volume is lowered when the main unit is turned on. If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the volume to the middle (50) when the main unit is turned on. (>28) The dialog is too persistent or the dialog does not sound natural. This system has a function to make the dialog stand out when the volume is low. (>28) To return to the factory preset. While the main unit is on, press [Í/I] on the main unit for more than 4 sec. (All the indicators will blink twice when this system is reset.) If this system does not operate as expected, returning the settings to the factory preset may solve the problem. ≥The remote control code will return to “1” when this system is returned to the factory preset. To change the remote control code, refer to page 28. General operation Bluetooth® Sound SC-HTB370PPC_RQT9777-1P_mst.book Page 29 Tuesday, January 29, 2013 11:48 AM
30RQT9777 There is no audio. The power of the main unit turns off automatically. (When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) ≥There is a problem with the amplifier. ≥Is the volume extremely high? If so, lower the volume. ≥Is this system placed in an extremely hot place? If so, move this system to a cooler place and wait a few moments and then try to turn it on again. If the problem persists, confirm the TV indicator and BD/DVD indicator blink, turn this system off, remove the AC power supply cord and consult your dealer. Please be sure to remember the indicators that were blinking and inform the dealer. No power.Ensure the AC power supply cord of the active subwoofer is connected properly. After turning the subwoofer on, it immediately turns off. Unplug the AC power supply cord and consult your dealer. No sound from the subwoofer.≥Check that the active subwoofer is turned on. ≥Check that the WIRELESS LINK indicator lights green. (>24) The WIRELESS LINK indicator lights red.≥There is no link between the main unit and the active subwoofer. jCheck that the main unit is turned on. jTurn the active subwoofer off and then back on. Alternatively, turn the active subwoofer off, disconnect the AC power supply cord and then reconnect it. ≥The active subwoofer and the main unit may not be paired correctly. Try the following operation. (Wireless pairing) 1Turn on the main unit and active subwoofer. 2Press [ID SET] on the rear of the active subwoofer for more than 3 sec. (The WIRELESS LINK indicator will blink in red.) 3While pressing and holding [INPUT SELECTOR] on remote control, press and hold [VOLi] on the main unit for more than 4 sec. (The BD/DVD indicator will blink and sound mode indicators light up in sequence.) ≥When the wireless pairing is successful, BD/DVD indicator will stop flashing and WIRELESS LINK indicator lights green. 4Turn the main unit off and on. ≥Consult your dealer if the problem persists. Specifications Active Subwoofer AMPLIFIER SECTION RMS output power: Dolby Digital Mode Front ch (L, R ch) 60 W per channel (6≠),1kHz,10%THD Subwoofer ch 120 W per channel (8≠), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 240 W FTC output power: Dolby Digital Mode Front ch (L, R ch) 25 W per channel (6≠), 120 Hz to 20 kHz, 1.0 % THD Subwoofer ch 40 W per channel (8≠), 60 Hz to 120 Hz, 1.0 % THD Total FTC Dolby Digital mode power 90 W WIRELESS SECTION Wireless module Frequency Range 2.40335 GHz to 2.47735 GHz No. of channels 38 TERMINAL SECTION Digital audio input Optical digital input (TV, BD/DVD) 2 Sampling frequency 32 kHz, 44.1 kHz, 48 kHz 88.2 kHz, 96 kHz (only LPCM) Audio format LPCM, Dolby Digital, DTS Digital Surround Analog audio input Aux input (AUX)1 USB Port For service use only. SC-HTB370PPC_RQT9777-1P_mst.book Page 30 Tuesday, January 29, 2013 11:48 AM