Panasonic Sc Htb370 Owners Manual
Have a look at the manual Panasonic Sc Htb370 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Getting started RQT977711 Step 2 Assembling the speakers The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).The screws and other items are not supplied as the type and size will vary with each installation. ≥For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.” (>12). ≥For a safety measure to prevent the speakers from falling, refer to page 20. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers. ≥The two speakers are interchangeable. ≥Keep the screws out of reach of children to prevent swallowing. When attaching the speakers to a wall Place the speakers horizontally ∏2 Speakers∏2 Speaker cables WHITE: Left RED: Right∏1 Metal bracket ∏2 Screws AScrew (supplied) ≥Tighten securely. SC-HTB370PPC_RQT9777-1P_mst.book Page 11 Tuesday, January 29, 2013 11:48 AM
12RQT9777 Connect the speaker cables. § If you have difficulty inserting the cable, try straightening the speaker cable and then bending the cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above). Drive a screw into the wall. ≥Use the measurements indicated below to identify the screwing positions on the wall. ≥Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker. ≥Keep the screws out of reach of children to prevent swallowing. 1Insert the wire fully. r: White s: Blue line ≥Insert the wire fully, taking care not to insert beyond the wire insulation. 2Press into the groove. ARight speaker connector BLeft speaker connector AAt least 30 mm (1 3/16q) B‰4.0 mm (5/32q) C‰7.0 mm to ‰9.4 mm (9/32q to 3/8q) DWall or pillar E5.5 mm to 6.5 mm ( 7/32q to 1/4q) F238 mm (9 3/8q)G576 mm (2211/16q)H248 mm (93/4q)I20 mm (25/32q) JWall mounting hole 45 Push RedWhite Front view (semi-transparent image) SC-HTB370PPC_RQT9777-1P_mst.book Page 12 Tuesday, January 29, 2013 11:48 AM
Getting started RQT977713 Fit the speaker securely onto the screw(s). Red connector:The speaker attached to the red connector cable is to be placed on the right side. White connector: The speaker attached to the white connector cable is to be placed on the left side. ARight speaker connector BLeft speaker connector DODO NOT ≥Move the speaker so that the screw is in this position.≥In this position, the speaker will likely fall if moved to the left or right. Red White SC-HTB370PPC_RQT9777-1P_mst.book Page 13 Tuesday, January 29, 2013 11:48 AM
14RQT9777 The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).The screws and other items are not supplied as the type and size will vary with each installation. ≥For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.” (>15). ≥For a safety measure to prevent the speakers from falling, refer to page 20. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Attach the stand neck. ≥The two speakers are interchangeable. ≥Keep the screws out of reach of children to prevent swallowing. Connect the speaker cables. § If you have difficulty inserting the cable, try straightening the speaker cable and then bending the cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above). Place the speakers vertically ∏2 Speakers∏2 Speaker cables WHITE: Left RED: Right∏2 Stand necks ∏2 Screws AScrew (supplied) ≥Tighten securely. 1 Insert the wire fully. r: White s: Blue line ≥Insert the wire fully, taking care not to insert beyond the wire insulation. 2 Press into the groove. 45 Push SC-HTB370PPC_RQT9777-1P_mst.book Page 14 Tuesday, January 29, 2013 11:48 AM
Getting started RQT977715 Drive a screw into the wall. Fit the speaker(s) securely onto the screw(s). ≥Use the measurements indicated below to identify the screwing positions on the wall. ≥Leave at least 20 mm ( 25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker. ≥Keep the screws out of reach of children to prevent swallowing. AAt least 30 mm (13/16q)B‰4.0 mm (5/32q) C‰7.0 mm to ‰9.4 mm (9/32q to 3/8q) DWall or pillar E5.5 mm to 6.5 mm ( 7/32q to 1/4q) FFront speaker (Rear view) G100 mm (3 15/16q) H436 mm (175/32q) I34 mm (111/32q) JWall mounting hole Red connector:The speaker attached to the red connector cable is to be placed on the right side. White connector:The speaker attached to the white connector cable is to be placed on the left side. KLeft speaker connectorLRight speaker connector DODO NOT ≥Move the speaker so that the screw is in this position.≥In this position, the speaker will likely fall if moved to the left or right. Red White SC-HTB370PPC_RQT9777-1P_mst.book Page 15 Tuesday, January 29, 2013 11:48 AM
16RQT9777 ≥For a safety measure to prevent the speakers from falling, refer to page 20. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” (>11, 1 2) . Attach the leg stands. ≥Keep the screws out of reach of children to prevent swallowing. When placing the speakers on a table Place the speakers using the leg stands ∏2 Speakers∏2 Speaker cables WHITE: Left RED: Right∏1 Metal bracket ∏2 Leg stands∏4 Screws Red connector:With the speaker facing down, the speaker attached to the red connector cable is to be placed on the left side. White connector:With the speaker facing down, the speaker attached to the white connector cable is to be placed on the right side. AScrew (supplied) ≥Tighten securely.BScrew holeCRight speaker connector DLeft speaker connector Align the higher or lower holes with the projecting parts on the speaker. ≥By changing the position that the stand is attached to the projecting parts, the height can be adjusted by 9 mm ( 11/32q). RedWhite SC-HTB370PPC_RQT9777-1P_mst.book Page 16 Tuesday, January 29, 2013 11:48 AM
Getting started RQT977717 ≥For a safety measure to prevent the speakers from falling, refer to page 20. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” (>11, 12). Attach the support legs and speaker feet. ≥Keep the screws and the speaker feet out of reach of children to prevent swallowing. Place the speakers using the support legs and speaker feet ∏2 Speakers∏2 Speaker cables WHITE: Left RED: Right∏1 Metal bracket ∏2 Support legs∏4 Screws∏2 Speaker feet Red connector:With the speaker facing down, the speaker attached to the red connector cable is to be placed on the left side. White connector:With the speaker facing down, the speaker attached to the white connector cable is to be placed on the right side. AScrew (supplied) ≥Tighten securely.BScrew hole CSpeaker foot (supplied)DRight speaker connector ELeft speaker connector Align the projecting parts on the speaker with support leg. RedWhite SC-HTB370PPC_RQT9777-1P_mst.book Page 17 Tuesday, January 29, 2013 11:48 AM
18RQT9777 ≥For a safety measure to prevent the speakers from falling, refer to page 20. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following step 1 of “Place the speakers vertically” (>14). Insert the speaker cable through the speaker base and connect the speaker cables. ≥Be sure to insert the speaker cable through the threading hole as indicated in the illustration. § If you have difficulty inserting the cable, try straightening the speaker cable and then bending the cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above). Place the speakers using the speaker bases ∏2 Speakers∏2 Speaker cables WHITE: Left RED: Right∏2 Stand necks ∏2 Speaker bases∏4 Screws 1 Insert the wire fully. r: White s: Blue line ≥Insert the wire fully, taking care not to insert beyond the wire insulation. 2 Press into the groove. 45 Push SC-HTB370PPC_RQT9777-1P_mst.book Page 18 Tuesday, January 29, 2013 11:48 AM
Getting started RQT977719 Attach the speaker base. ≥The two speakers are interchangeable. ≥Keep the screws out of reach of children to prevent swallowing. Red connector:The speaker attached to the red connector cable is to be placed on the right side. White connector:The speaker attached to the white connector cable is to be placed on the left side. Align the projecting parts with the holes on the speaker. Press into the groove.Screw (supplied) ≥Tighten securely. SC-HTB370PPC_RQT9777-1P_mst.book Page 19 Tuesday, January 29, 2013 11:48 AM
20RQT9777 To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter “cord”). ≥Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support is recommended (>12, 15). Improper attachment may result in damage to the wall and speakers, and personal injury. ≥Use a cord that is capable of supporting over 10 kg (22.05 lbs) (with a diameter of about 1.5 mm ( 1/16q)). ≥The speaker fall prevention measure is to minimize the possibility of damage and harm, but it does not completely guarantee this effect. ≥Keep the screws out of reach of children to prevent swallowing. ≥Make sure that the slack of the cord is minimal. Additional speaker fall prevention measures When attaching the speakers to a wall ACord§BScrew eyeCWallDWall-mounted speakers § If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm ( 13/32q) apart from the tip, at an angle of 45o (as illustrated above). Horizontal placement Vertical placement SC-HTB370PPC_RQT9777-1P_mst.book Page 20 Tuesday, January 29, 2013 11:48 AM