Panasonic Sc Htb370 Owners Manual

Getting started
RQT977711
Step 2  Assembling the speakers
The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).The screws and other items are not supplied as the type and size will vary with each installation.
≥For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.” 
(>12).
≥For a safety measure to prevent the speakers from...

12RQT9777
Connect the speaker cables.
§ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the 
cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above).
Drive a screw into the wall.
≥Use the measurements indicated below to identify the screwing positions on the wall.
≥Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker.
≥Keep the screws out of reach of...

Getting started
RQT977713
Fit the speaker securely onto the screw(s).
Red connector:The speaker attached to the red connector cable is to be placed on the right side.
White connector: The speaker attached to the white connector cable is to be placed on the left side.
ARight speaker connector
BLeft speaker connector
DODO NOT
≥Move the speaker so 
that the screw is in this 
position.≥In this position, the 
speaker will likely fall if 
moved to the left or 
right.
Red White...

14RQT9777
The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).The screws and other items are not supplied as the type and size will vary with each installation.
≥For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.” 
(>15).
≥For a safety measure to prevent the speakers from falling, refer to page 20.
≥To prevent damage or...

Getting started
RQT977715
Drive a screw into the wall.
Fit the speaker(s) securely onto the screw(s).
 
≥Use the measurements indicated below to identify the 
screwing positions on the wall.
≥Leave at least 20 mm (
25/32q) of space above and on each 
side of the speaker to allow enough space for fitting the 
speaker.
≥Keep the screws out of reach of children to prevent 
swallowing.
AAt least 30 mm (13/16q)B‰4.0 mm (5/32q)
C‰7.0 mm to ‰9.4 mm (9/32q to 3/8q)
DWall or pillar
E5.5 mm to 6.5 mm (
7/32q to...

16RQT9777
≥For a safety measure to prevent the speakers from falling, refer to page 20.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of “Place the speakers 
horizontally” (>11, 1 2) .
Attach the leg stands. 
≥Keep the screws out of reach of children to prevent swallowing.
When placing the speakers on a table
Place the speakers using the leg stands
∏2 Speakers∏2 Speaker cables
WHITE: Left
RED: Right∏1 Metal bracket
∏2...

Getting started
RQT977717
≥For a safety measure to prevent the speakers from falling, refer to page 20.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of “Place the speakers 
horizontally” (>11, 12).
Attach the support legs and speaker feet.
≥Keep the screws and the speaker feet out of reach of children to prevent swallowing.
Place the speakers using the support legs and 
speaker feet
∏2 Speakers∏2 Speaker cables
WHITE:...

18RQT9777
≥For a safety measure to prevent the speakers from falling, refer to page 20.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following step 1 of “Place the speakers 
vertically” (>14).
Insert the speaker cable through the speaker base and connect the 
speaker cables.
≥Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
§ If you have difficulty inserting the cable, try straightening the...

Getting started
RQT977719
Attach the speaker base.
≥The two speakers are interchangeable.
≥Keep the screws out of reach of children to prevent swallowing.
Red connector:The speaker attached to the red connector cable is to be placed on the right side.
White connector:The speaker attached to the white connector cable is to be placed on the left side.
Align the projecting 
parts with the holes 
on the speaker.
Press into the groove.Screw (supplied)
≥Tighten securely.
SC-HTB370PPC_RQT9777-1P_mst.book  Page...

20RQT9777
To prevent the speakers from falling, it is recommended, as an additional 
protection measure, to attach the speakers to the wall or table with a fall 
prevention cord (hereafter “cord”).
	≥Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a 
surface that may not have strong enough support is recommended (>12, 15). Improper attachment may result in damage to 
the wall and speakers, and personal injury.
≥Use a cord...