Panasonic Sc Htb20 Owners Manual

Getting started
11
VQT4D53
Connect the speaker cables.
≥To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the 
color of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker.
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw (not supplied) into the wall.
≥Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at...

12
VQT4D53
≥For a safety measure to prevent the s peakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Attach the front ornaments.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ Be sure to insert the screws following the order as indicated in the illustration.
Connect the speaker cables.
≥Insert the wire fully, taking care not to insert beyond the wire insulation.
≥ To make sure that the speaker cable is...

Getting started
13
VQT4D53
Fit the speaker(s) securely onto the screw(s) with the hole(s).
≥Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect with 
the speaker cable with a white connector on the observers’ left.
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 to 3 of “Place the...

14
VQT4D53
≥For a safety measure to prevent the s peakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 to 3 of “Place the speakers 
horizontally” ( >10).
Attach the speaker feet to the bottom of the speakers.
≥ Keep the speaker feet out of reach of children to prevent swallowing.
A Screw (supplied)
B Screw hole
Place the speakers using the 
speaker feet
∏ 1 Speaker (L) ∏1 Speaker (R) ∏2...

Getting started
15
VQT4D53
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following step 1 of “Place the speakers vertically” 
(> 12)
Assemble the speakers.
≥ To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the 
color of the L/R indicator on the speaker label so as not to connect the speaker...

16
VQT4D53
≥Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect with 
the speaker cable with a white connector on the observers’ left.
To prevent the speakers from falling, it is recommended, as an additional 
protection measure, to attach the speakers to the wall or table with a fall 
prevention cord (hereafter “cord”).
	≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a...

Getting started
17
VQT4D53
When placing the speakers on a table
Horizontal placement
Vertical placement
ACord  (not supplied)
B Screw eye (not supplied)
≥Depending on the placement of the speakers, the 
screwing position of the screw eye may differ.
C Wall
D Approx. 150 mm (529/32q)






SC-HTB20P~Body_mst.fm  17 ページ  ２０１２年１月１８日　水曜日　午前１１時１分 

18
VQT4D53
≥Turn off all equipment before connection and read the appropriate owner’s manual.
Do not connect the AC power supply cord until all other connections are complete.
∫ HDMI
The HDMI connection supports VIERA Link “HDAVI Control” ( >24) when used with a compatible Panasonic TV.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s 
HDMI cables.
Recommended part number (High Speed HDMI cable):
RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30...

Getting started
19
VQT4D53
AHDMI cable  (not supplied)
B Optical digital audio cable (not supplied)
You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to 
this system.
≥Refer to the operating instructions of the set top box for the optimal video connection.
Preparation≥Connect this system to the TV. (> 18)
A HDMI cable  (not supplied)
B Optical digital audio cable
 (not supplied)
∫HDMI standby pass-through
Even if this system is in standby mode, the...

20
VQT4D53
Connect to the terminals of the same color.
≥Connect only after all other connections are complete.
≥ The active subwoofer consumes a small amount of  AC power even when it is in standby mode (Approx. 
0.07 W). In the interest of power conservation, if you will not be using this system for a long time, unplug 
it from the household AC outlet.
Speaker cable connection
A RED
Front speaker (Rch)
B WHITE
Front speaker (Lch)
AC power supply cord connection
A To a household AC outlet
Install this...