Panasonic Sc Htb20 Owners Manual

							until 
2012/2/3
Owner’s Manual
Home Theater Audio System
Model No. SC-HTB20
PPC
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA (7262)
Canada : 1-800-561-5505
VQT4D53-1
SC-HTB20P_VQT4D53_eng.book  1 ページ  ２０１２年３月７日　水曜日　午前１０時３０分 
						

							2
VQT4D53
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety 
instructions listed below. Keep these operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in  accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,  heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with 
one wider than the other. 
A grounding-type plug has two blades and a third 
grounding prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of 
the obsolete outlet. 10 Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the 
manufacturer.
12 Use only with the cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to 
avoid injury from tip-over.
13 Unplug this apparatus during lightning 
storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing 
is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
Unit≥To reduce the risk of fire, electric shock or product damage,
jDo not expose this unit to rain, moisture, dripping or 
splashing.
j Do not place objects filled with liquids, such as vases, on 
this unit.
j Use only the recommended accessories.
j Do not remove covers.
j Do not repair this unit by yourself. Refer servicing to 
qualified service personnel.
Button-type battery (Lithium battery)≥Risk of fire, explosion and burns. Do not disassemble, heat 
above  60oC (140 oF) or incinerate.
Unit≥Do not place sources of naked flames, such as lighted 
candles, on this unit.
Placement≥To reduce the risk of fire, electric shock or product damage,
jDo not install or place this unit in a bookcase, built-in 
cabinet or in another confined space. Ensure this unit is 
well ventilated.
j Do not obstruct this unit’s ventilation openings with 
newspapers, tablecloths, curtains, and similar items.
Button-type battery (Lithium battery)≥ Danger of explosion if battery is incorrectly replaced. 
Replace only with the type recommended by the 
manufacturer.
≥ When disposing the batteries, please contact your local 
authorities or dealer and ask for the correct method of 
disposal.
≥ Insert with poles aligned.
≥ Do not touch the terminals ( i and j) with metal objects.
≥ Do not recharge, disassemble, remodel, heat or throw into 
fire.
≥ Keep out of reach of children.
≥ Mishandling of batteries can cause electrolyte leakage and 
may cause a fire.
jRemove the battery if you do not intend to use the remote 
control for a long period of time. Store in a cool, dark 
place.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct 
sunlight for a long period of time with doors and windows 
closed.
WARNING
If any electrolyte should come into contact with your hands or 
clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, 
never rub the eyes. Rinse eyes thoroughly with water, and 
then consult a doctor.

This product contains a CR Coin Cell Lithium Battery which 
contains Perchlorate Material  s special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
.
CAUTION
SC-HTB20P_VQT4D53_eng.book  2 ページ  ２０１２年１月１６日　月曜日　午後８時３分 
						

							3
Precautions
VQT4D53
The lightning flash with arrowhead 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.
CAUTION:TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS 
INSIDE.
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE FOLLOWING APPLIES ONLY IN THE 
U.S.A.
FCC Note:
This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules.
These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or 
more of the following measures:
≥Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and 
receiver.
≥ Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician 
for help.
FCC Caution: To assure continued compliance, follow the 
attached installation instructions and use only shielded 
interface cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by 
the party responsible for compliance could void the user’s 
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, 
including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of North 
America
Telephone No.: 1-800-211-PANA (7262)
SC-HTB20P~Safety_mst.fm  3 ページ  ２０１２年１月２３日　月曜日　午後５時１１分 
						

							4
VQT4D53
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2
Before use
Supplied items ..................................................................................................... 5
System (SC-HTB20)  ................................................................................................................ 5
Accessories ................................................................................................................... ........... 5
Control reference guide ...................................................................................... 6
Active subwoofer ...................................................................................................................... 6
Remote control ................................................................................................................ ......... 7
Unit care  ............................................................................................................... 7
Getting started
Step 1 Selecting the placement method  ........................................................... 8
Speaker system  ................................................................................................................ ....... 9
Active subwoofer ...................................................................................................................... 9
Step 2 Assembling the speakers  ..................................................................... 10
When placing the speakers on a wall  .................................................................................... 10
When placing the speakers on a table ................................................................................... 13
Speaker fall prevention meas ures ......................................................................................... 16
Step 3 Connections ........................................................................................... 18
Basic connection  .............................................................................................................. ...... 18
Connection with other devices  ............................................................................................... 19
Speaker cable connection ...................................................................................................... 20
AC power supply cord connection  ......................................................................................... 20
Operations
Using this unit  ................................................................................................... 21
3D sound  ...................................................................................................................... ......... 22
To adjust the dialog effect level  ............................................................................................. 22
Audio output modes  ............................................................................................................ ... 23
Linked operations with the TV (VIERA LinkTM “HDAVI ControlTM”)..................  24
Advanced operations ........................................................................................ 25
Reference
Troubleshooting ................................................................................................ 26
Indicator illumination  ........................................................................................ 28
Specifications .................................................................................................... 29
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) ........................... 30
Limited Warranty (ONLY FOR CANADA)  ........................................................ 31
SC-HTB20P_VQT4D53_eng.book  4 ページ  ２０１２年１月１６日　月曜日　午後８時３分 
						

							5
Precautions
Reference
Getting started
Before use
Operations
VQT4D53
#FGP SF
VT F
Supplied items
Check the supplied accessories before using the system.
	≥Product numbers are correct as of January 2012. These may be subject to change.
≥ For U.S.A. and Puerto Rico: 
To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 30.
For Canada: To order accessories, call the dealer from whom you have made your purchase.
≥ The supplied AC power supply cord is for use with the active subwoofer.
Do not use it with other equipment. Also, do not use cords for other equipment with the active subwoofer.
≥The illustrations shown may differ from your unit.
≥ Operations in this Owner’s Manual are described mainly with the remote control, but you can 
perform the operations on the active subwoofer if the controls are the same.
System (SC-HTB20)
∏ 1 Active subwoofer(SU-HTB20)∏2 Front speakers(SB-HTB20)
Accessories
∏1 Remote control 
(with a battery)
(N2QAYC000064)
∏ 1 AC power supply 
cord
(K2CB2CB00021)
∏ 2 Speaker cables (Length: 3 m (9.8 ft))(REEX1266A: RED)
(REEX1267A: WHITE)
∏1 Speaker joint(RAQ0087)∏6 Screws(XYN5+J14FJK)∏4 Speaker feet(RKAX0028-K)∏2 Front ornaments(RAQ0088)
∏2 Speaker bases(RYK1688-K)∏2 Stands(RYQ0853-KJ) (ONLY FOR CANADA)
The enclosed French Canadian label sheet 
corresponds to the English display on the remote 
control and the top and rear of the active 
subwoofer.
SC-HTB20P_VQT4D53_eng.book  5 ページ  ２０１２年１月１６日　月曜日　午後８時３分 
						

							6
VQT4D53
Control reference guide
1Standby/on switch ( Í/I)
Press to switch the unit from on to standby 
mode or vice versa. In standby mode, the unit 
is still consuming a small amount of power.
2 Remote control signal sensor ( >9)
3 Adjust the volume of the speakers
4 Select the input source TV #  BD/DVD  # AUX
^----------------------------}
5 Input selector indicators
§
A TV indicator
Lights green when the TV is the audio 
source
B BD/DVD indicator
Lights amber when the device connected to 
the BD/DVD terminal is the audio source
C AUX indicator
Lights amber when the device connected to 
the AUX terminal is the audio source 6 Audio format indicators
§
D
Dolby Digital indicator
Lights when Dolby Digital is the current 
audio format
E DTS indicator
Lights when DTS is the current audio 
format
F PCM indicator
Lights when PCM (2ch, Multi-channel) is 
the current audio format
7 Speaker terminals ( >20)
8 Cooling fan
9 HDMI OUT terminal (ARC compatible) (>18, 19)
10 HDMI IN terminal (BD/DVD) ( >19)
11 OPTICAL DIGITAL AUDIO IN terminal (TV)  (>19)
12 OPTICAL DIGITAL AUDIO IN terminal (AUX)  (>19)
13 AC IN terminal ( >20)
§The indicators will also blink in various conditions ( >28)
Active subwoofer
3
1456
2
78
9101112
13
Active subwoofer 
(front) Active subwoofer 
(rear)
SC-HTB20P_VQT4D53_eng.book  6 ページ  ２０１２年１月１６日　月曜日　午後８時３分 
						

							7
Before use
VQT4D53
1 Turn the system on or off (>21)
2 Adjust the dialog effect level (> 22)
3 Select the TV as the source ( >21)
4 Select the BD/DVD as the source ( >21)
5 Adjust the output level of the active subwoofer  (bass sound) (> 21)
6 Adjust the volume of the speakers ( >21)
7 Mute the sound ( >21)
8 Select the AUX as the source ( >21)
Unit care
∫ Clean the system with a soft, dry cloth
≥When the system becomes very dirty, wring a cloth moistened in water tightly to wipe the dirt, and then 
wipe it with a dry cloth.
≥ When cleaning the system, use a fine cloth. Do not use tissues or other materials (towels, etc.) that can 
fall apart. Small grains may get stuck inside the speaker cover.
≥ Never use alcohol, paint thinner or benzine to clean the system.
≥ Before using chemically-treated cloth, carefully read the instructions that came with the cloth.
Remote control
1
3
4 2 5
68
7
Remove the insulation sheet A
 before using.
∫To replace a button-type battery
1 While pressing the stopper  B, pull out the 
battery holder.
2 Set the button-type battery with its ( i) mark 
facing upward and then put the battery holder 
back in place.
≥ When replacing the battery, use:
CR2025 (Lithium battery)
≥ Keep the button-type battery out of reach of 
children to prevent swallowing.
SC-HTB20P_VQT4D53_eng.book  7 ページ  ２０１２年１月１６日　月曜日　午後８時３分 
						

							8
VQT4D53
( FUU JO H
TU BSU FE
≥Choose a placement method that suits you best.
Step 1 Selecting the placement method
When placing the speakers on a wall
When placing the speakers on a table
Place the speakers 
horizontally
Page 10
Place the speakers 
vertically
Place the speakers using 
the speaker bases
Place the speakers using 
the stands
Place the speakers using 
the speaker feet
Page 12
Page 13
Page 14
Page 15
SC-HTB20P_VQT4D53_eng.book  8 ページ  ２０１２年１月１６日　月曜日　午後８時３分 
						

							Getting started
9
VQT4D53
≥Use a screwdriver ( i) for assembling the speakers.
≥ Do not hold the speakers in one hand to avoid injury by dropping the speakers when carrying.
∫ When carrying the active subwoofer
	≥Place the active subwoofer in a horizontal position with the top panel faced upward.
≥ Placing the active subwoofer and the speakers too close to walls and corners can result in excessive bass. Cover walls and 
windows with thick curtains.
≥ If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away fr om the 
TV.
≥ Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the system.
Caution≥The active subwoofer and supplied speakers are to be used only as indicated in these instructions. Failure to do 
so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified 
service person if damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to a wall using methods other than those described in this manual.
Speaker system
∫ When attaching the speakers to a wall
The wall or pillar to which the speakers are to be attached should be capable of supporting 33 k g (72.8 lbs) per screw. 
Consultation with a qualified building contractor is recommended when attaching the speakers to a wall. Improper attachment may  
result in damage to the wall and speakers, and cause personal injury.
∫ When placing the speakers in front of the TV
The speakers may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote  
control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV.
≥ If the stands are being usedMove the speakers farther away from the TV. If the TV still does not function properly, try removing the stands.≥If the stands are not usedMove the speakers farther away from the TV. If the TV still does not function properly, try placing them beside the TV ( >8).
Active subwoofer
The remote control signal sensor is located on the active subwoofer.≥Use the remote control within the correct operation range.
BDo not hold the active subwoofer from this opening.
The parts inside (speaker unit) may be damaged.
C Always hold the bottom of the active subwoofer when 
moving it.
A
ARemote control signal sensor
≥Remote control operation range
Distance: Within approx. 7 m (23 ft.) 
directly in front
Angle: Approx. 30
oleft and right
B
C
SC-HTB20P_VQT4D53_eng.book  9 ページ  ２０１２年１月１６日　月曜日　午後８時３分 
						

							10
VQT4D53
≥For a safety measure to prevent the s peakers from falling, refer to page 16.
≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Match the L/R indicator  A on the speaker with the L/R indicator  B on the 
speaker joint, then insert the metal  part of the speaker joint fully into C.
≥Do not connect the left speaker to the right speaker joint or vice versa. Be sure to verify the orientation of the speaker with  
the label on the rear of the speaker.
Use the screws to secure the speakers to the speaker joint.
≥ Keep the screws out of reach of children to prevent swallowing.
Step 2 Assembling the speakers
When placing the speakers on a wall
Place the speakers horizontally
∏ 1 Speaker (L) ∏1 Speaker (R) ∏2 Speaker cables(L): WHITE
(R): RED
∏1 Speaker joint ∏4 Screws 
A  L/R indicator on the 
speaker label B
  L/R indicator on the 
speaker joint C
 “”
 shaped slit
D Screw
≥ Be sure to insert the screws following the order as indicated in the illustration.




2
4
1 3
SC-HTB20P_VQT4D53_eng.book  10 ページ  ２０１２年１月１６日　月曜日　午後８時３分