Panasonic Sc Bt735 Operating Instructions

							Getting started 
21
VQT2Q52
Network Easy Setting (Connection Test)
Network Easy Setting (Internet Connection Test)
	≥Refer to the operating instructions of the hub or router.
≥You can perform this setup anytime by selecting “Network Easy Setting” in 
the Setup menu. (>40)
≥You can redo these settings individually using “Network Settings”. (>40)
≥Do not connect to a wireless network for which you do not have usage 
rights. Wireless networks for which you do not have usage rights (SSID
*2) 
may appear during the automatic search for a wireless network 
environment. However, if you connect, there is a risk that it will be regarded 
as illegal access.≥After performing network settings on this unit, the settings (encryption level, 
etc.) of the Wireless router (Access point) might change. When you have 
trouble getting online on your PC, perform the network settings of your PC 
in accordance with the settings of Wireless router (Access point).
*2 This is a name given to identify specific networks among wireless LANs. 
When the SSID is the same in two devices, data can be transmitted 
between them.
Occasionally, Panasonic may release updated firmware for this 
unit that may add or improve the way a feature operates. 
These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen 
is displayed.
If downloading on this unit fails or this unit is not connected to 
the Internet, then you can download the latest firmware from 
the following website and burn it to a CD-R to update the 
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (>40, “System 
Information”)
DO NOT DISCONNECT the unit from the AC power or perform 
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the 
unit’s display. Unit will restart and the following screen will be 
displayed.
	≥You can perform update anytime by selecting “Firmware Update” in the 
Setup menu. (>40)
≥Downloading will require several minutes. It may take longer or may not 
work properly depending on the connection environment.
≥If you do not want to check for the latest firmware version, set “Automatic 
Update Check” to “Off”. (>40)
DisplayCheck the 
following
1. LAN cable connection or 
Connection to access point:Fail≥Connection of 
the LAN 
cables 
(>18) 2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or 
Connection to access point:Pass≥Connection 
and settings 
of the hub 
and router
≥Settings of 
“IP Address / 
DNS 
Settings” 
(>40) 2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or 
Connection to access point:Pass
2. IP address setting:Home 
network 
available
3. Connection to gateway :Fail
1. LAN cable connection or 
Connection to access point:Pass
2. IP address setting :Pass
3. Connection to gateway :Fail
DisplayCheck the following
Cannot find the server.
(B019)≥“Primary DNS” and “Secondary 
DNS” settings of “IP Address / 
DNS Settings” (>40)
Failed to connect to 
the server.
(B020)≥The server may be busy or the 
service may have been 
suspended. Please wait a few 
moments, and then try again.
≥Settings of “Proxy Server 
Settings” (>40) and the router
OK
Network Easy Setting (Connection Test)
YesNo
Complete.
1. LAN cable connection         
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. 
Select “No” and press [OK] to finish Network 
Easy Setting.
: Fail
: Fail
: Fail
OK
Network Easy Setting (Internet Connection Test)Complete.
- Connection to the Internet       :   Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
Firmware updating
Firmware Update
  Latest Online Version: x.xx
  Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
RETURNOK
Ye sNo
The firmware has been updated.Current Installed Version: x.xx
RETURNOK
SCBT735_330_230EBEPEG_VQT2Q52-B.book  21 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							22
VQT2Q52
STEP 6:
Reprogramming the 
remote control
When other Panasonic products respond to this 
remote control
Change “Remote Control” (>40) on the main unit and the 
remote control (the two must match) if you place other 
Panasonic products close together and it responds to this 
remote control.
To change the code on the main unit.
1While stopped, press [START].
2Press [3,4] to select “To Others” and 
press [OK].
3Press [3,4] to select “Setup” and press 
[OK].
4Press [3,4] to select “General” and press 
[OK].
5Press [3,4] to select “Remote Control” 
and press [OK].
6Press [3,4] to select the code (1 or 2) and 
press [OK].
To change the code on the remote control.
1While pressing [OK]
Press and hold the numbered button (1 or 
2), which has the same number you 
selected in the step 6 for more than 5 
seconds.
2Press [OK].
Inserting or removing a 
media
≥When inserting a media, ensure that it is facing the right way 
up.
≥While the reading indicator is displayed, do not turn off the 
unit or remove the media. Such action may result in loss of 
the media’s contents.
≥When removing the SD card, press on the centre of the card 
and pull it straight out.
≥If you connect a Panasonic product with a USB connection 
cable, setup screen may be displayed on connected 
equipment. For details, refer to the instructions for the 
connected equipment.
∫To switch sources
Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or 
“USB”.
≥If a media is inserted while the unit is stopped, the source 
switches automatically depending on the inserted media.
SD CARDSETUP MIC
SCBT735_330_230EBEPEG_VQT2Q52-B.book  22 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Getting started 
23
VQT2Q52
START menu
Major functions of this unit can be operated from the START 
menu.
1Press [START].
2Press [3,4] to select the item and press 
[OK].
e.g., BD-VideoTo exit the screen
Press [START].
∫Selecting the source by the remote control
	≥Items to be displayed may vary with the media.
Playback
Viewing PicturePlay back the contents.
To p  M e n u(>25)
Menu(>25)
NetworkHome Network 
(DLNA)(>36)
Internet ContentDisplays the Home screen of 
the VIERA CAST (>34)
Input SelectionSwitches to each source
BD/DVD/CD
SD card
iPod
FM Radio:
To enjoy the FM radio 
(>29)
USB device
AUX
*1:
To enjoy TV broadcasts with 
this unit’s speakers (>30)
ARC
*1: To enjoy TV 
broadcasts with this unit’s 
speakers (>30)
DIGITAL IN 1
*1:
To enjoy TV broadcasts with 
this unit’s speakers (>30)
*1 “(TV)” is displayed next to 
items set for TV AUDIO input. 
DIGITAL IN 2*2:
To enjoy audio from other 
devices with this unit’s 
speakers (>30)
*2 “(CABLE/SAT)” is displayed 
next to DIGITAL IN when set 
for CABLE/SAT AUDIO input. 
To enjoy sound from the 
TV
Select one source from 
either “AUX (TV)”, “ARC 
(TV)” or “DIGITAL IN 1 (TV)”.
Sound(Equalizer)(>24)
OKRETURN
Home Cinema
START
BD-Video
To Others Playback
Top Menu
Input Selection
Sound(Equalizer) Network
To  O t h e r sPlaylists:
You can play playlists 
created on DVD-VR.
Setup: (>37)
Card Management: (>26)
ButtonSource
BD/DVD or SD card (SD) (>25)
iPod (IPOD) (>32)
FM Radio (FM) (>29)
AUX
*1 (>30)
USB (>25)
ARC
*1 (>30)
DIGITAL IN 1
*1 (D-IN 1) (>30)
DIGITAL IN 2
*2(D-IN 2) (>30)
*1 “(TV)” is displayed next to items set for 
TV AUDIO input.
*2 “(CABLE/SAT)” is displayed next to 
DIGITAL IN when set for CABLE/SAT 
AUDIO input.
To enjoy sound from the TV
Select one source from either “AUX (TV)”, 
“ARC (TV)” or “DIGITAL IN 1 (TV)”.
BD/SD
iPod
EXT-INRADIO
SCBT735_330_230EBEPEG_VQT2Q52-B.book  23 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							24
VQT2Q52
Enjoying sound effects 
from all speakers
1Press [SURROUND] several times to select 
the effect.
≥The selected effect will only be displayed on the main 
unit.
2While “MANUAL” is displayed, press 
[2,1] and select the desired effect.
∫Adjusting speaker level during play
1Press and hold [jCH SELECT] to activate the speaker 
setting mode.
2Press [jCH SELECT] several times to select the speaker.
Each time you press the button:
L R—) C_) RS_)RB
*_) LB*_)LS_) SW
^"""""""""""""""""""""""""""""b
* When the optional surround back speakers are connected.3Press [3] (increase) or [4] (decrease) to adjust the 
speaker level for each speaker.
s6 dB to r6 dB
∫Changing the sound modes
1Press [SOUND] several times to select the mode.
≥The selected mode will only be displayed on the main 
unit.
2While the selected mode is displayed
Press [2,1] and select the desired setting.
	≥The sound effects/modes may not be available or have no effect with some 
sources.
≥You may experience a reduction in sound quality when these sound 
effects/modes are used with some sources. If this occurs, turn the sound 
effects/modes off.
Enjoying surround sound 
effects
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH
You can enjoy sound from the front speakers, as well as 
the surround even when playing a 2-channel sound or 
non-surround sound.
MANUAL
DOLBY PL II MOVIE (Dolby Pro Logic II Movie)
Suitable for movie software, or the one recorded in 
Dolby Surround.
(except DivX)
DOLBY PL II MUSIC (Dolby Pro Logic II Music)
Adds 5.1-channel effects to stereo sources.
(except DivX)
7.1CH VS (7.1CH Virtual Surround)
You can enjoy 6.1/7.1-channel surround-like effect 
using 5.1-channel speakers.
S.SURROUND (Super Surround)
You can enjoy sound from all speakers with stereo 
sources.
2CH STEREO
You can play any source in stereo. Sound will be 
output to the front speakers and the subwoofer only.
L R: Front speaker (left and right:only the balance
is adjustable.)
≥Press [2,1] to adjust the balance of the front 
speakers.
C: Centre speaker
RS: Surround speaker (right)
RB
*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥The channels not included in the playing audio will not be 
displayed (subwoofer is displayed even if it is not 
included).
EQ: (Equalizer)
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUB W: (Subwoofer level)
You can adjust the amount of base.
1 (Weakest effect) to 4 (Strongest effect)
≥The setting you make is retained, and recalled every 
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy 
bass sound can be heard clearly, even if the acoustics 
of your room are not optimal.
≥The setting you make is retained, and recalled every 
time you play from the same type of source.
C.FOCUS: (Centre focus)
(Effective when playing audio containing centre 
channel sound.)
You can make the sound of the centre speaker seem 
like it is coming from within the TV.
W.SRND: (Whisper-mode Surround)
You can enhance the surround effect for low volume 
sound. (Convenient for late night viewing.)
SCBT735_330_230EBEPEG_VQT2Q52-B.book  24 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Getting started  Playback
25
VQT2Q52
Playb ack
Playing video contents
[BD] [DVD] [CD] [SD] [USB]
Preparation
Turn on the television and select the appropriate video input on 
the television.
1Press [Í] to turn on the unit.
2Insert the media.
Play starts.
≥If the menu is displayed, press [3,4,2,1] to select 
the item and press [OK].
≥If play does not start, press [1PLAY].
∫To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up 
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP 
MENU].
≥Press [3,4,2,1] to select the item and press [OK].
≥Pop-up menu also appears by pressing [OPTION] and 
selecting “Pop-up Menu”.
∫To show the status messages
While playing, press [STATUS].
The status messages give you information about what is 
currently being played. Each time you press [STATUS], the 
information displayed will change.
	≥Signal from PAL discs is output as PAL. Signal from NTSC discs is output 
as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC 
Contents Output” for NTSC discs. (>38)
≥Depending on media and contents, the display may change or may not 
appear.
≥DivX: Successive play is not possible.
≥It is not possible to playback AVCHD and MPEG2 video which have been 
dragged and dropped, copied and pasted to the media.
These functions may not work depending on the media and 
contents.
Press [∫STOP].
The stopped position is memorised.
Resume play function
Press [1PLAY] to restart from this position.
≥The position is cleared if the tray is opened or you press 
[∫STOP] several times to display “STOP” on unit’s display.
≥On BD-Video discs including BD-J (>49), the resume 
play function does not work.
Press [;PAUSE].
≥Press [;PAUSE] again or [1PLAY] to restart play.
Search
While playing, press [SEARCH6] or [SEARCH5].
≥Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6] or [SEARCH5].
≥BD-Video and AVCHD: Forward direction [SEARCH5] 
only.
The speed increases up to 5 steps.
≥Press [1PLAY] to revert to normal playback speed.
While playing or paused, press [SKIP:] or [SKIP9].
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
≥DivX: Backward direction [SKIP:] only.
While paused, press [2] (2;) or [1] (;1).
≥Press and hold to change in succession forward or 
backward.
≥Press [1PLAY] to revert to normal playback speed.
≥BD-Video and AVCHD: Forward direction [1] (;1) only.
Press [AUDIO].
You can change the audio channel number or soundtrack 
language (>47), etc.
PLAYBD-Video T1     C1     0:05.140:20.52
Current position e.g. BD-Video
To t a l  t i m e Elapsed time in the title T: Title, C: Chapter, PL: Playlist
Other operations during play
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
SCBT735_330_230EBEPEG_VQT2Q52-B.book  25 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							26
VQT2Q52
1Press [OPTION].
2Select an item and press [OK].
≥Depending on the played contents if you perform “Screen 
Aspect”, there may be no effect.
≥When “TV Aspect” (>39) is set to “4:3” or “4:3 Letterbox”, 
the “Zoom” effect is disabled.
	≥Depending on the media and contents, displayed items are different.
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as 
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to 
enjoy more functions such as subtitles, exclusive images and 
online games by connecting this unit to the Internet.
≥The usable functions and the operating method may vary 
with each disc, please refer to the instructions on the disc 
and/or visit their website.
To turn on/off secondary video
Press [PIP].
ASecondary video
BPrimary videoTo turn on/off secondary audio
1Press [DISPLAY].
2Press [3,4] to select the “Disc” menu and press [1].
3Press [3,4] to select the “Signal Type” menu and press 
[OK].
4Press [3,4] to select the “Soundtrack” under “Secondary 
Video” menu and press [1].
5Press [3,4] to select the “On” or “Off”.When “On” is selected, press [1] and then press [3,4] to 
select the language.
6Press [RETURN] to exit.
	≥During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, 
secondary audio will not be played (>38).
Some BD-Live content available on the Blu-ray discs may 
require an Internet account to be created in order to access the 
BD-Live content. Follow the screen display or instruction 
manual of the disc for information on acquiring an account.
1Connect to the network. (>18)
2Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage (>49).
3Insert the disc.
∫Deleting data/Formatting SD cards
1Insert an SD card.
2Press [START].
3Press [3,4] to select “To Others” and press [OK].
4Press [3,4] to select “Card Management” and press 
[OK].
5Press [3,4] to select “BD-Video Data Erase” or “Format 
SD Card” and press [OK].
6Press [2,1] to select “Yes” and press [OK].
7Press [2,1] to select “Start” and press [OK].
	≥To use the above functions, it is recommended that you format the card on 
this unit. If the SD card you use is formatted, all data on the card will be 
erased. It cannot be recovered.
≥“BD-Live Internet Access” may need to be changed for certain discs 
(>38).
≥When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet. 
Useful functions
While DIRECT NAVIGATOR screen is displayed
PropertiesTo display the titles properties (recording 
date, etc.)
Chapter 
ViewTo select the chapter
To  P i c t u r e Playing still pictures (>28)
FolderTo switch to another folder
While playing
Screen 
AspectWhen black bars are shown at the top, 
bottom, left, and right sides of the screen, you 
can enlarge the image to fill the screen.
Top MenuTo display Top Menu.
Pop-up 
MenuTo display Pop-up Menu.
MenuTo display Menu.
Enjoying BD-Live or 
BONUSVIEW in BD-Video
Playing picture-in-picture


Enjoying BD-Live discs with 
Internet 
Card Management No. of Files    6
Free space    300 MB
SD CARD
Format this SD Card.OK
RETURN
BD-Video Data Erase
Format SD Card
SCBT735_330_230EBEPEG_VQT2Q52-B.book  26 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Playback
27
VQT2Q52
ABOUT DIVX VIDEO: 
DivX® is a digital video format created by DivX, Inc. This is an 
official DivX Certified device that plays DivX video. Visit 
www.divx.com for more information and software tools to 
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified
® device must be registered in order to play 
DivX Video-on-Demand (VOD) content. 
To generate the registration code, locate the DivX VOD section 
in the device setup menu. 
Go to vod.divx.com with this code to complete the registration 
process and learn more about DivX VOD.
≥It is not possible to playback DivX VOD content recorded on 
the USB device.
Display the unit’s registration code.
(>40, “DivX Registration” in “General”)
A10 alphanumeric characters
≥After playing DivX VOD content for first time, the registration 
code is not displayed.
≥If you purchase DivX VOD content using a registration code 
different from this unit’s code, you will not be able to play this 
content. (“Authorisation Error.” is displayed.)
Cancel the unit’s registration.
(>40, “DivX Registration” in “General”)
Press [2,1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in 
www.divx.com.
Regarding DivX VOD content that can only be played a set 
number of times
Some DivX VOD content can only be played a set number of 
times. When you play this content, the remaining number of 
plays is displayed. You cannot play this content when the 
number of remaining plays is zero. (“Rental Expired.” is 
displayed.)
≥The remaining number of plays decreases each time a 
program is played. However, when playing from the point 
where play was previously stopped, the remaining number of 
plays does not decrease due to the resume play function.
∫Displaying subtitles text
You can display subtitles text on the DivX video disc on this 
unit.
This function has no relation to the subtitles specified in DivX 
standard specifications and has no clear standard. The 
operation might be different or it may not operate properly 
depending on the way the file was made or the state of this unit 
(playing, stopped, etc.).
Set “Subtitle” in “Disc” (>34)
	≥DivX video files that do not display “Text” do not contain subtitles text.
≥If the subtitles text are not displayed correctly, try changing the language 
settings. (>38)
Playing music
[DVD] [CD] [USB]
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1Insert a disc or USB device.
If the menu is displayed, press [3,4] to select the item 
and press [OK].
2Press [3,4] to select the track and press 
[OK].
∫Playing a track in another folder 
1While the “Music list” is displayed
Press [OPTION].
2Press [3,4] to select “Select Folder” and press [OK].
	≥You cannot select folders that contain no compatible tracks.
Regarding DivX
DivX Registration
You must register this unit to play
protected DivX videos.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXXPlease register at www.divx.com/vod/
 0.09  4.30
01
02
03
04
05
DIRECT NAVIGATORMusic list
CD
No.
Track Name Play TimeTrack1
Track14min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec  Track2
5 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5
Play
RETURNOPTION

						

							28
VQT2Q52
Playing still pictures
[BD] [DVD] [CD] [SD] [USB]
(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card, 
USB device)
1Insert a disc, SD card or USB device.
If the menu is displayed, press [3,4] to select the item 
and press [OK].
2BD-RE, DVD-RAM
Press [3,4,2,1] to select the album and 
press [OK].
3Press [3,4,2,1] to select the still 
picture and press [OK].
Press [2,1] to display the previous or next still picture.
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
∫To show the picture properties
While playing, press [STATUS] twice.
To exit the screen
Press [STATUS].
1Press [OPTION].
2Select an item and press [OK].
	≥Depending on the media and contents, displayed items are different.
≥When a still picture with large number of pixels is played, the display 
interval may become longer. Even if the setting is changed, the display 
interval may not become shorter.
≥When a music CD, a USB device with MP3 recorded and an iPod/iPhone 
are inserted/connected to this unit, iPod/iPhone has a priority to be played 
back as background music.

 To t a l  8 106_DVD
 Total 132006 9 12
VideoPicture
Press OK to go to Picture View.
Previous Next
Slideshow
VideoPicturePage  02/02
DIRECT NAVIGATORAlbum ViewDVD-RAM(VR)
OPTIONOKRETURN
OPTION
DIRECT NAVIGATORPicture ViewDVD-RAM(VR)VideoPicture
PlayRETURN
2006  9  12
Page  001/001
0001
0005
00090006 0007 0008 0002 0003 0004
Date     11.12.2009                    Total        3/9
e.g. JPEG on DVD-RAM
Shooting date
Useful functions
While “Album View” or “Picture View” screen is displayed
Start 
SlideshowYou can display still pictures one by one at a 
constant interval.
Slideshow 
Setting
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
Music files on an iPod/iPhone or a music CD 
or USB device can be played back as 
background music during the slideshow.
Soundtrack Folder
A folder to playback can be selected when a 
USB device with MP3 recorded is connected 
to this unit.
Press [3,4,2,1] to select “Set” and 
press [OK].
Select 
FolderTo switch to another higher folder
≥Only if there is a multiple number of higher 
folders recognizable
FolderTo select the still pictures in another folder
To  V i d e oPlaying video contents (>25)
To album 
viewTo display album view.
While playing (except for slideshow)
Rotate 
RIGHTRotate the still picture.
Rotate LEFT
Zoom out
Reduce the still picture
≥This function is only available for 
small-sized still pictures.
Zoom inCancel “Zoom out”
SCBT735_330_230EBEPEG_VQT2Q52-B.book  28 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Radio Playback
29
VQT2Q52
Radio
Listening to the Radio
Up to 30 stations can be set.
1Press [RADIO] to select “FM”.
2Press [STATUS] to select the position to 
start the auto preset search.
LOWEST:
To begin auto preset with the lowest frequency (FM87.50).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Presetting stations 
manually”.
3Press and hold [OK].
Release the button when “AUTO” is displayed.
The tuner starts to preset all the stations it can receive into 
the channels in ascending order.
	≥“SET OK” is displayed when the stations are set, and the radio tunes to the 
last preset station.
≥“ERROR” is displayed when automatic presetting is unsuccessful. Preset 
the stations manually.
Preparation
Select a radio broadcast.
1Press [RADIO] to select “FM”.
2Press [SEARCH6] or [SEARCH5] to select the 
frequency.
≥To start automatic tuning, press and hold [SEARCH6], [SEARCH5] 
until the frequency starts scrolling. Tuning stops when a station is found.
1While listening to the radio broadcast
Press [OK].
2While “P” is flashing on the display
Press the numbered buttons to select a 
channel.
To select a 1-digit number
e.g., 1: [1]B[OK].
To select a 2-digit number
e.g., 12: [1]B[2]
	≥A station previously stored is overwritten when another station is stored in 
the same channel preset.
1Press [RADIO] to select “FM”.
2Press the numbered buttons to select the 
channel.
To select a 1-digit number
e.g., 1: [1]B[OK].
To select a 2-digit number
e.g., 12: [1]B[2].
Alternatively, press [W,X] or [2,1].
If the station you are listening to is transmitting RDS signals, 
“RDS” will light up on the display.
While listening to the radio broadcast
Press [DISPLAY] to display the text data.
PS: Programme service
PTY: Programme type
OFF: Frequency display
* M.O.R. M=Middle of the road music
∫Display on the main unit
TUNED/STEREO:Displayed when receiving stereo 
broadcasting
TUNED:Displayed when receiving monaural 
broadcasting or monaural sound is 
selected.
Presetting stations 
automatically
Presetting stations manually
Listening/confirming the preset 
channels
RDS broadcasting
PTY displays
NEWS VARIED FINANCE COUNTRY
AFFAIRS POP M CHILDREN NATIONAL
INFO ROCK M SOCIAL A OLDIES
SPORT M.O.R. M* RELIGION FOLK M
EDUCATE LIGHT M PHONE IN DOCUMENT
DRAMA CLASSICS TRAVEL TEST
CULTURE OTHER M LEISURE ALARM
SCIENCE WEATHER JAZZ
∫If noise is excessive
Press [AUDIO] to display “MONO”.
The sound becomes monaural.
Press the button again to cancel the mode. “AUTO ST” will 
be displayed on the main unit. Depending on the broadcast 
system, stereo or monaural will be selected.
“MONO” is also cancelled when you change the frequency.
≥This setting can be preset for each broadcasting station. 
SCBT735_330_230EBEPEG_VQT2Q52-B.book  29 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							30
VQT2Q52
TV
Enjoying TV with unit’s 
speakers
Preparation
Turn on your TV and select the appropriate audio input mode 
[AUX, ARC, D-IN 1 or D-IN 2] to suit the connections to this 
unit. (>23)
You can enhance stereo sources with surround sound effect.
1Press [SURROUND] several times to select 
the effect.
2While “MANUAL” is displayed on the unit’s display
Press [2,1] and select the desired effect.
For more detailed information on this operation, please refer to 
the “Enjoying surround sound effects” section on page 24.
You can adjust the mode depending on the source or situation.
1Press [SOUND] several times to select the 
mode.
2While the selected mode is displayed on the unit’s 
display
Press [2,1] and select the desired setting.
For more detailed information on this operation, please refer to 
the “Changing the sound modes” section on page 24.Select to suit the type of audio from the DIGITAL AUDIO IN 
terminals on the main unit.
Press [EXT-IN] several times to select “D-IN 1” 
(DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).
∫DIGITAL IN 1/DIGITAL IN 2
Press [AUDIO].
M1
M2
M1rM2 (stereo audio)
(Only works with Dolby Dual Mono)
≥“M1” or “M2” is not available if “On” is selected in “Digital 
Audio Input”. (>38)
∫DIGITAL IN 2
Press [STATUS].
CABLE/SAT AUDIO
Select when an HDMI connected STB is selected on the 
TV, “D-IN 2” input is automatically selected. (>31, “Setting 
the audio link with the STB”).
	≥Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not 
output from the HDMI AV OUT terminal.
Surround sound effects
Surround modes to enjoy TV audio or stereo 
sources from all speakers:
≥DOLBY PL II MOVIE
≥DOLBY PL II MUSIC
≥S.SURROUND
≥Cinema Surround (>19)
Sound modes
Making settings for digital 
audio input
SCBT735_330_230EBEPEG_VQT2Q52-B.book  30 ページ  ２０１０年２月９日　火曜日　午前１０時５１分