Panasonic Sc Bt735 Operating Instructions

							Getting started 
11
VQT2Q52
∫Discs that cannot be played in this unit
Any other disc that is not specifically supported or 
previously described.
≥2.6 GB and 5.2 GB DVD-RAM
≥DVD-RAM that cannot be removed from cartridge
≥Super Audio CD
≥Photo CD
≥DVD-Audio
≥Video CD and Super Video CD
≥WMA discs
≥HD DVD
∫Region management information
BD-Video 
This unit plays BD-Video marked with labels containing the 
region code “B”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the 
region number “2” or “ALL”.
Example:
∫Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by 
a recorder, etc. needs to be finalized by the recorder to play on 
this unit. Please refer to the recorder’s instructions.
∫BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby 
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master 
Audio) adopted in BD-Video. In order to enjoy these audio 
formats, refer to page 38.
∫Music CD
Operation and sound quality of CDs that do not conform to 
CD-DA specifications (copy control CDs, etc.) cannot be 
guaranteed.
∫SD card
≥MiniSD Cards, microSD Cards, microSDHC 
Cards and microSDXC Cards can be used, but 
must be used with an adaptor card. These are 
usually supplied with such cards, or otherwise 
customer provided.
≥Keep the Memory Card out of reach of children to 
prevent swallowing.
≥To protect the card’s contents, move the record prevention 
tab (on the SD card) to “LOCK”.
≥This unit is compatible with SD Memory Cards that meet SD 
Card Specifications FAT12 and FAT16 formats, as well as 
SDHC Memory Cards in FAT32 format (Does not support 
long file name.) and SDXC Memory Cards in exFAT.
≥If the SD card is used with incompatible computers or 
devices, recorded contents may be erased due to the card 
being formatted etc.
≥Useable memory may be slightly less than the card capacity.
∫USB device
≥This unit supports connecting a USB memory, digital camera 
and video camera produced by Panasonic, etc. It is not 
warranted that all USB devices will work with this unit.
≥This unit does not support USB device charging.
≥FAT12, FAT16 and FAT32 file systems are supported.
≥This unit supports USB 2.0 High Speed.
	≥It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files 
were created.
≥The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read 
the disc’s instructions carefully.
2
4 1ALL2
SCBT735_330_230EBEPEG_VQT2Q52-B.book  11 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							12
VQT2Q52
STEP 1: Preparing the speakers
[BT735] [BT330]
Caution
≥Do not stand on the base. Be cautious when children are 
near.
≥When carrying speakers, hold the stand and base parts.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and 
perform assembly on it.
≥For wall mount, refer to page 42.
≥Keep the screws out of reach of children to prevent 
swallowing.
[BT735]
[BT330]
Assembling the speakers
[BT735]
2 Front speakers
2 Surround speakers
4 Stands (with cables)
4 Bases
8 Screws A
4 Screws B[BT330]
2 Front speakers
2 Stands (with cables)
2 Bases
8 Screws
AB
1
2
2
1
Back of the base
Tighten 
securely.
Insert the wire fully.
r: White
s: Blue line
Push!
Leave about 80 mmTighten securely.Screw A
Screw BPress into the groove. Pull the cable 
straight along 
the line and 
slide into the 
groove.
1
2
2
1
Slide into the groove.
Tighten securely.
Insert the wire fully.
r: White
s: Blue line
Push!
Position the cable 
between the ridges.
Leave about 120 mmPress into the groove.
Tighten securely. Screw
SCBT735_330_230EBEPEG_VQT2Q52-B.book  12 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Getting started 
13
VQT2Q52
ASpeaker cable sticker (included)
BConnector
Be sure to match the number on each sticker with the 
connector colour.
	≥Be careful not to cross (short-circuit) or reverse the polarity of the 
speaker wires as doing so may damage the speakers.
≥Don’t use a front speaker as a surround speaker or vice versa. Verify 
the type of speaker with the label on the rear of the speaker before 
connecting the appropriate cable.
≥To avoid injury by falling or dropping the speaker, place the speaker cables 
with care not to stumble or hook.
≥Do not hold the speaker in one hand to avoid injury by dropping the 
speaker when carrying.
[BT330]
[BT735] [BT330]
∫Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that 
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.
e.g., [BT735]
AString (not included)
Thread from the wall to the speaker and tie tightly.
BRear of the speaker
CScrew eye (not included)
DWall
EApprox.150 mm
Speaker cable stickerColour
1FRONT (L) WHITE
2FRONT (R) RED
3SURROUND (L) BLUE
4SURROUND (R) GREY
5CENTRE GREEN
6SUBWOOFER PURPLE
FRONT
Lch


3

Use of the speaker cable stickers is convenient 
when making cable connections.
e.g. Front speaker (L)4
Push!r: White
s: Blue line Connecting the speaker cables. Insert the wire fully, 
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BT230]
Speaker assembly option
Thread the speaker cable 
through the base.Attach the speaker.
Leave about 120 mm
You can remove and use the cable from 
the stand. To reattach the cable, refer to 
page 42.Insert the wire fully.
r: White
s: Blue linePush!
Press into the groove.
Tighten securely.
Slide into the 
groove.

 

SCBT735_330_230EBEPEG_VQT2Q52-B.book  13 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							14
VQT2Q52
STEP 2: Positioning
How you set up your speakers can affect the bass and the sound field.
Setup example
Place the front, centre, surround speakers at approximately 
the same distance from the seating position.
The angles in the diagram are approximate.
[BT735]
 [BT330]
Using “Auto Speaker Setup” (>19) is a convenient way to get 
the ideal surround sound from your speakers when you are 
unable to place them.
	≥Keep your speakers at least 10 mm away from the system for proper 
ventilation.
ACentre speaker
Put on a rack or shelf. Vibration caused by the speaker can 
disrupt the picture if it is placed directly on the TV.
BFront speakers
CSubwoofer
DSurround speakers
≥Place the speakers at the same height or higher than ear 
level.
∫If irregular colouring occurs on your TV, 
turn the TV off for about 30 minutes.
If it persists, move the speakers further away from the TV.
∫Upgrade your system to 7.1-channel 
system
The main unit is designed to enjoy the 7.1ch surround sound. 
By connecting 2 units of the Panasonic wireless system 
SH-FX71 with 4 speakers, more theatre-like effect can be 
available.
Necessary equipment:
≥2 optional wireless systems (SH-FX71)
≥2 additional speakers
[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]
For more details, refer to the operating instructions for the 
optional wireless system.
Caution
≥The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may 
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified 
service person if damage has occurred or if you experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using methods other than those described in this 
manual.
≥Do not touch the front netted area of the speakers. Hold by the sides.
120°60°






	≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be 
negatively affected.
≥You can damage your speakers and shorten their useful life if you play 
sound at high levels over extended periods.
≥Positioning speakers in front
It is possible to locate all the speakers in front of the listening position. 
However, the optimal surround sound effect may not be obtainable.
≥Place speakers on flat secure bases.
≥Placing speakers too close to floors, walls, and corners can result in 
excessive bass. Cover walls and windows with thick curtains.
≥For optional wall mount, refer to page 42.
You can enjoy surround speaker 
sound wirelessly when you use the 
optional Panasonic wireless 
accessory (SH-FX71).
For more details, refer to the operating 
instructions for the optional wireless 
system.
SCBT735_330_230EBEPEG_VQT2Q52-B.book  14 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Getting started 
15
VQT2Q52
STEP 3: Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Connect to the terminals of the same colour.
Use outdoor antenna if FM radio reception is poor.
Speaker cable connection
Radio antenna connection
Using an indoor antenna
Using an outdoor antenna
AC  I N
3ΩSURROUND
52
13Ω6Ω6ΩFRONTCENTERSUBWOOFERRLRL4
3
+
6


Main unit6PURPLESubwoofer
5GREENCentre speaker
2REDFront speaker (Rch)
1WHITEFront speaker (Lch)
4GREYSurround speaker (Rch)
3BLUESurround speaker (Lch)
When using the optional wireless 
system, do not attempt to connect 
any extra surround or surround 
back speakers to the main unit.
FM ANT
 
(75   )
Main unit
AFM indoor antenna (included)
BAdhesive tape
Affix this end of the antenna where reception is best.
FM ANT



Ω(75   )
Main unit
AFM outdoor antenna [Using a TV antenna
(not included)]
The antenna should be installed by a competent technician.
B75 ≠ coaxial cable (not included)
CAntenna plug adaptor (United Kingdom and Republic of Ireland 
only)
≥Keep the adaptor out of reach of children to prevent swallowing. e.g.,
SCBT735_330_230EBEPEG_VQT2Q52-B.book  15 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							16
VQT2Q52
The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize 
your system setting.
	≥Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥Turn off all equipment before connection.
∫OPTICAL IN
≥After making the digital audio connection, make settings to 
suit the type of audio from your digital equipment (>30).
∫HDMI
The HDMI connection supports VIERA Link “HDAVI Control” 
(>31) when used with a compatible Panasonic TV.≥Please use High Speed HDMI Cables that have the HDMI 
logo (as shown on the cover). It is recommended that you 
use Panasonic’s HDMI cable. When outputting 1080p signal, 
please use HDMI cables 5.0 meters or less.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), 
RP-CDHS50 (5.0 m), etc.
	≥To enjoy TV audio from this home theatre system’s speakers, select “AUX (TV)” as a source (>23).
	
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source.
Connection to a TV
Basic connection
AV
OUT
VIDEO
OUTAUX
L
R
VIDEO
OUT
L
R
AUX
L
VIDEO IN
R  AUDIO IN
LR 
AU D I O  O U T
VIDEO OUT
AUX

TV
AVideo cable (included)
BAudio cable (not included)
Connection for the better audio
AUX
1L
RL
R2OPTICAL1
DIGITAL AUDIO IN
VIDEO
OUTVIDEO
OUT
OPTICAL
OUT
L
VIDEO IN
R  AUDIO IN
OPTICAL 1
VIDEO OUT

TV
AVideo cable (included)
BOptical digital audio cable
 (not included)
AV1
VIDEO IN


If the TV does not have a VIDEO IN terminal, connect using 
a Scart adaptor (Scart—VIDEO IN).
AScart adaptor (not included)
BVideo cable (included) e.g.,
SCBT735_330_230EBEPEG_VQT2Q52-B.book  16 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Getting started 
17
VQT2Q52
	
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source (>23).
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cables.
≥Select “ARC (TV)” as the audio input source (>23)
≥Refer to the operating instructions of the TV for the settings to output digital audio.
	≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 2 (CABLE/SAT)” or “D-IN 2” as a source 
(>23).
NECESSARY SETTINGS
≥“HDMI Audio Output” : “Off” (>39)
Connection for the best picture and audio
VIDEO
OUTAUX
OPTICAL2 1
DIGITAL AUDIO IN
L
ROPTICAL2 1
DIGITAL AUDIO IN
L
R2OPTICAL1
DIGITAL AUDIO IN
AV
OUTAV
OUT
(ARC)
OPTICAL
OUTAV IN
OPTICAL 1
HDMI AV OUT (ARC)

TV
AHDMI cable (not included)
BOptical digital audio cable (not included)
≥For the TV audio, an audio cable (not included) can be also 
used by connecting the AUX terminal with the AUDIO OUT 
terminal on the TV.
Connection with Set Top Box, etc.
LANAUXLANWIRELESS
DIGITAL TRANSMITTERL
RL
ROPTICAL2 1
DIGITAL AUDIO INOPTICAL1
DIGITAL AUDIO IN
OPTICAL
OUT
OPTICAL 2

TV
AOptical digital audio cable (not included)
BSet Top Box, cable TV, VCR, DVD recorder, etc. Refer to the operating instructions of the respective 
devices for the optimal connections.
SCBT735_330_230EBEPEG_VQT2Q52-B.book  17 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							18
VQT2Q52
The following services can be used when this unit is connected 
to broadband.
≥Firmware can be updated (>21)
≥You can enjoy the BD-Live (>26)
≥You can enjoy VIERA CAST (>34)
≥DLNA feature (>36)For details about connection method, refer to the instructions 
supplied with the connected equipment.
≥The unit is not compatible with public wireless LAN services 
(Hotspot etc.) provided in airports, stations, cafes etc.
STEP 4: AC mains lead connection
Connection to a broadband network
∫Using LAN (ethernet) cable∫Using Wireless LAN Adaptor (optional)
ALAN Cable [Straight]
(not included)
BBroadband router, etc.
CInternetAWireless LAN Adaptor
BWireless router (Access point), etc.
CInternet
≥Use shielded LAN cables when connecting to peripheral 
devices.
≥Inserting any cable other than a LAN cable in the LAN 
terminal can damage the unit.≥Read the operating instructions for the Wireless LAN 
Adaptor DY-WL10 (optional) thoroughly when using it.
≥For up to date compatibility information on your Wireless 
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
VIDEO
OUTLAN(
10BASE-T/
100BASE-TX)



LANWIRELESS



≥Only the Wireless 
LAN Adaptor 
DY-WL10 (optional) 
can be used.
AC IN
             
Main unitAAC mains lead (included)
BTo a household mains 
socket ≥Connect only after all other connections are complete.
≥The main unit consumes a small amount of AC power, even 
when it is turned off (When the “Quick Start” setting is “Off”, 
[BT735] [BT330]: approx. 0.1 W, [BT230]: approx. 0.2 W). In the 
interest of power conservation, if you will not be using this 
unit for a long time, unplug it from the household mains 
socket.
≥Do not use any other AC mains lead except the supplied one. \For\the\United\Kingdom\and\Republic\of\Ireland\only\
BE SURE TO READ THE CAUTION FOR THE AC 
MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
SCBT735_330_230EBEPEG_VQT2Q52-B.book  18 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							Getting started 
19
VQT2Q52
STEP 5: Smart setup / Easy setup
The Smart setup/Easy setup assists you to make 
necessary settings.
Follow the on-screen prompts to make basic settings for the 
system.
[BT735] [BT330]: Smart setup
[BT230]: Easy setup
Preparation
≥Turn on your TV and select the appropriate video input mode 
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to 
this unit.
≥[BT735] [BT330]: Place the Auto speaker setup microphone at 
the actual seating position. (At ear level when seated.)
	≥Keep as quiet as possible during the Auto speaker setup. Excessive 
background noise may lead to incorrect settings.
≥The speakers output loud test signals during setup.
≥After the Smart setup is completed, unplug the Auto speaker setup 
microphone and keep it for future use.
1Press [Í].
2Follow the on-screen instructions and 
make the settings with [3,4,2,1] and 
press [OK].
Language
Select the language used on menu screen.
TV Aspect 
Select the aspect to suit your TV and preference.
Wireless System
If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position
Specify the positioning of the surround speakers.
[BT230]: Speaker check
Check if the connection to each speaker is valid.
[BT735] [BT330]: Auto Speaker Setup
Adjust the speaker output level automatically.
Speaker Output
Make surround sound setting for speaker output.
Cinema Surround
The function creates the sound of virtual speakers to 
enhance the realistic surround feeling as if the sound 
comes from all directions.
(Speakers position: Surround Layout only)
(Effective when playing video with 5.1/7.1ch audio)
TV Audio
Select the audio input connection from your TV,
[item with “(TV)”].
Quick Start
Speed of startup from standby mode is increased.
3Press [OK] several times to finish the 
“Smart setup” or “Easy setup”.
After completing “Smart setup” or “Easy setup”, you can 
perform “Network Easy Setting”.
	≥You can perform this setup anytime by selecting “Smart setup” or “Easy 
setup” in the Setup menu. (>40)
≥Language and TV Aspect settings are automatically retrieved if this unit is 
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later 
via an HDMI cable.
OKOK
SETUP MIC
e.g., [BT735]
SCBT735_330_230EBEPEG_VQT2Q52-B.book  19 ページ  ２０１０年２月９日　火曜日　午前１０時５１分
 
						

							20
VQT2Q52
Select “Wired” or “Wireless” and press [OK].
∫“Wired” connection
Follow the on-screen instructions to make your connection 
settings.
≥When you experience problems (>right)
∫“Wireless” connection
If you select “Wireless” and “Wireless LAN Adaptor is not 
connected.” is displayed, check that the Wireless LAN Adaptor 
is fully inserted. Alternatively, disconnect and reconnect it. If 
there is still no change in the display, consult your dealer for 
advice.
Select “WPS (PUSH button)” or “Search for 
access point” and then follow the on-screen 
instructions and make the settings.
WPS (PUSH button):
If your Wireless router (Access point) 
supports WPS (PUSH button), you can 
easily perform the settings by pressing 
WPS button on it. 
WPS (Wi-Fi Protected Setup) is a 
standard that facilitates settings relating 
to the connection and security of 
wireless LAN devices.
1Press WPS button or corresponding button of Wireless 
router (Access point) until the lamp starts flashing.
≥For details, refer to the operating instruction of Wireless 
router (Access point).
2Press [OK].
*1 Wi-Fi Protected Setup-compatible Wireless router (Access point) may 
have the mark.
Search for access point:
Available Wireless routers (Access points) are searched and 
listed. You can select the one to use from the list.
1Press [3,4] to select SSID*
2 of Wireless router (Access 
point) you want to connect with. Then press [OPTION] to 
show information of the selected router, make a note of the 
authentication and encryption type.
≥If you can not find the SSID*
2, select “Search again”.2Press [RETURN] and then press [OK].
Then select an item on the following screen which 
corresponds to the authentication type noted down in step 
1 (>left).
Follow the on-screen instructions to make the settings.
≥Input your encryption key code in “Encryption Key” 
supplied with your Wireless router (Access point).
Access Point Connection Setting
Network Easy Setting 
OKRETURN
Network Easy Setting (Connection Test)
Wired
Wireless
Select a connection mode. 
 Current setting  :  Wired
 
LAN cable connection:
 Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
 Connect the Wireless LAN Adaptor (DY-WL10) to the USB
 port and select “Wireless”.
Access Point Connection SettingSelect a connection method for access to 
Wireless LAN.
Please refer to the operating instructions of 
the access point about connection methods.
WPS (PUSH button)
Search for access point
1
e.g.,
OK
Access Point Connection Setting
ReceptionSelect an access point to connect with.
To search for access point again, please 
select "Search again" below.
SSIDXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXSearch again
SSID
Wireless type
Authentication type
Encryption type:XXXXXXXXXXXXXXX
:802.11n/g/b (2.4GHz)
:WPA-PSK
:AES
When you experience 
problems with settings
DisplayCheck the following
A conflict with another 
device occurred.≥Please wait a few moments, 
and then try again.
A time out error occurred.≥Setting of the Wireless 
router (Access point) for 
MAC Address etc.
≥The signal may be weak. 
Using the USB extension 
cable supplied with the 
Wireless LAN Adaptor, 
adjust the position of the 
Wireless LAN Adaptor.
≥The SSID*
2 and the 
encryption key of the 
Wireless router (Access 
point).
≥Please wait a few moments, 
and then try again. An authentication error or a 
time out error occurred.
A device error occurred.≥Connection of Wireless LAN 
Adaptor
If there is no improvement in 
symptom, consult your 
dealer.
Access Point Connection Setting
WPA2-PSK (AES/TKIP)
WPA-PSK (AES/TKIP)
Open/Shared Key (WEP)
Open system
Select authentication type.
 
OK
Access Point Connection SettingFailed to connect to the access point.
A conflict with other devices occurred.
Do you wish to setup Access Point 
Connection Setting again ?
YesNo
SCBT735_330_230EBEPEG_VQT2Q52-B.book  20 ページ  ２０１０年２月９日　火曜日　午前１０時５１分