Panasonic Sc Bt735 Operating Instructions

Getting started 
11
VQT2Q52
∫Discs that cannot be played in this unit
Any other disc that is not specifically supported or 
previously described.
≥2.6 GB and 5.2 GB DVD-RAM
≥DVD-RAM that cannot be removed from cartridge
≥Super Audio CD
≥Photo CD
≥DVD-Audio
≥Video CD and Super Video CD
≥WMA discs
≥HD DVD
∫Region management information
BD-Video 
This unit plays BD-Video marked with labels containing the 
region code “B”.
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the 
region...

12
VQT2Q52
STEP 1: Preparing the speakers
[BT735] [BT330]
Caution
≥Do not stand on the base. Be cautious when children are 
near.
≥When carrying speakers, hold the stand and base parts.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and 
perform assembly on it.
≥For wall mount, refer to page 42.
≥Keep the screws out of reach of children to prevent 
swallowing.
[BT735]
[BT330]
Assembling the speakers
[BT735]
2 Front speakers
2 Surround speakers
4 Stands (with cables)
4 Bases
8 Screws...

Getting started 
13
VQT2Q52
ASpeaker cable sticker (included)
BConnector
Be sure to match the number on each sticker with the 
connector colour.
	≥Be careful not to cross (short-circuit) or reverse the polarity of the 
speaker wires as doing so may damage the speakers.
≥Don’t use a front speaker as a surround speaker or vice versa. Verify 
the type of speaker with the label on the rear of the speaker before 
connecting the appropriate cable.
≥To avoid injury by falling or dropping the speaker, place the...

14
VQT2Q52
STEP 2: Positioning
How you set up your speakers can affect the bass and the sound field.
Setup example
Place the front, centre, surround speakers at approximately 
the same distance from the seating position.
The angles in the diagram are approximate.
[BT735]
 [BT330]
Using “Auto Speaker Setup” (>19) is a convenient way to get 
the ideal surround sound from your speakers when you are 
unable to place them.
	≥Keep your speakers at least 10 mm away from the system for proper 
ventilation....

Getting started 
15
VQT2Q52
STEP 3: Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Connect to the terminals of the same colour.
Use outdoor antenna if FM radio reception is poor.
Speaker cable connection
Radio antenna connection
Using an indoor antenna
Using an outdoor antenna
AC  I N
3ΩSURROUND
52
13Ω6Ω6ΩFRONTCENTERSUBWOOFERRLRL4
3
+
6


Main unit6PURPLESubwoofer...

16
VQT2Q52
The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize 
your system setting.
	≥Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥Turn off all equipment before connection.
∫OPTICAL IN
≥After making the digital audio connection, make settings to 
suit the type of audio from your digital equipment (>30).
∫HDMI
The HDMI connection supports VIERA Link “HDAVI...

Getting started 
17
VQT2Q52
	
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source (>23).
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cables.
≥Select “ARC (TV)” as the audio input source (>23)
≥Refer to the operating instructions of the TV for the settings to output digital audio.
	≥To enjoy TV audio from...

18
VQT2Q52
The following services can be used when this unit is connected 
to broadband.
≥Firmware can be updated (>21)
≥You can enjoy the BD-Live (>26)
≥You can enjoy VIERA CAST (>34)
≥DLNA feature (>36)For details about connection method, refer to the instructions 
supplied with the connected equipment.
≥The unit is not compatible with public wireless LAN services 
(Hotspot etc.) provided in airports, stations, cafes etc.
STEP 4: AC mains lead connection
Connection to a broadband network
∫Using LAN...

Getting started 
19
VQT2Q52
STEP 5: Smart setup / Easy setup
The Smart setup/Easy setup assists you to make 
necessary settings.
Follow the on-screen prompts to make basic settings for the 
system.
[BT735] [BT330]: Smart setup
[BT230]: Easy setup
Preparation
≥Turn on your TV and select the appropriate video input mode 
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to 
this unit.
≥[BT735] [BT330]: Place the Auto speaker setup microphone at 
the actual seating position. (At ear level when...

20
VQT2Q52
Select “Wired” or “Wireless” and press [OK].
∫“Wired” connection
Follow the on-screen instructions to make your connection 
settings.
≥When you experience problems (>right)
∫“Wireless” connection
If you select “Wireless” and “Wireless LAN Adaptor is not 
connected.” is displayed, check that the Wireless LAN Adaptor 
is fully inserted. Alternatively, disconnect and reconnect it. If 
there is still no change in the display, consult your dealer for 
advice.
Select “WPS (PUSH button)” or “Search...