Panasonic Sc Bft800 Operating Instructions

Getting started 
11
VQT2Z56
∫Discs that cannot be played in this unit
Any other disc that is not specifically supported or 
previously described.
≥2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ HD DVD
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the 
region code “ B”.
Example:
DVD-Video
[For[the[United[Kingdom[and[Republic[of[Ireland[
This unit...

12
VQT2Z56
STEP 1: Placement
How you place the main unit and the active subwoofer can affect the bass and the sound field.
Place the main unit near the TV.
The main unit should be placed parallel to the seating position.
e.g.
*1 Place the main unit on a flat secure base.
*2 Secure the main unit to prevent it from falling.
*3 Do not place the main unit in front of a 3D compatible TV. The unit may block the transmitter for the 3D eyewear. 
*4 Do not place the main unit too close to the TV. The unit may...

Getting started 
13
VQT2Z56
Never use any other method than spacified to install.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform the 
assembly on it.
≥ Keep the screws out of reach of children to prevent swallowing.
1At the bottom of the main unit:
Detach the stand after removing the screws.
2On the rear of the main unit:
Place the wall mount bracket by aligning 
the holes in the wall mount bracket with the 
projecting parts  A.
3Screw the wall mount bracket firmly into...

14
VQT2Z56
STEP 2: Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
≥This system supports the PCM and the Dolby Digital bitstream input audio. However, for example the system does not support 
the DTS bitstream input audio.
	
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be 
displayed properly.
≥ Turn off all equipment...

Getting started 
15
VQT2Z56
≥It is possible to playback 3D videos by connecting this unit with a 3D compatible TV.
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audio signal from the TV without connecting the optical digital audio cable (B). 
Be sure to connect to the TV’s ARC compatible terminal.
≥ Select “ARC” as the audio input source ( >23).
≥ Refer to the operating instructions of the TV for the settings to output...

16
VQT2Z56
Use outdoor antenna if FM radio reception is poor.
Radio antenna connection
Using an indoor antenna
Using an outdoor antenna

Main unit
AFM indoor antenna  (supplied)
B Adhesive  tap e
Affix this end of the antenna where reception is best.
Digital transmitter connection

 Main unit AFM outdoor antenna  [Using a TV antenna (not supplied)]
The antenna should be installed by a competent technician.
B 75 ≠ coaxial cable  (not supplied)
C Antenna plug adaptor  (United Kingdom and Republic of...

Getting started 
17
VQT2Z56
The following services can be used when this unit is connected 
to broadband.
≥Firmware can be updated  (>21)
≥ You can enjoy the BD-Live ( >26)
≥ You can enjoy the VIERA CAST ( >35)
≥ DLNA feature ( >36) For details about connection method, refer to the instructions 
supplied with the connected equipment.
Connection to a broadband network
∫
Using LAN (ethernet) cable ∫Using Wireless LAN Adaptor DY-WL10 
(optional)
A LAN Cable [Straight]
(not supplied)
B Broadband router,...

18
VQT2Z56
STEP 3: AC mains lead connection
AAC mains lead  (supplied)
B To a household mains socket A
AC mains lead  (supplied)
B To a household mains socket
≥ Connect only after all other connections are complete.
≥ The main unit consumes a small amount of AC power, even when it is turned off (When the “Quick Start” setting is “Off”: approx.  
0.1 W, the active subwoofer: approx. 0.4 W). In the interest of power conservation, if you will not be using this unit for a lon g 
time, unplug it from the...

Getting started 
19
VQT2Z56
STEP 5: Easy setup
The Easy setup assists you to make necessary 
settings.
Follow the on-screen prompts to make basic settings for the 
system.
Preparation
≥Turn on your TV and select the appropriate video input mode 
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to 
this unit.
≥ Confirm the digital transmitter connection. ( >16)
1Press [ Í] to turn on this unit.
2Press [ CI,BÍ ] on the active subwoofer 
to turn it on.
≥ Make sure the wireless link indicator lights...

20
VQT2Z56
≥If you can not find the SSID*2, select “Search again”.
2 Press [RETURN] and then press [OK].
Then select an item on the following screen which 
corresponds to the authentication type noted down in step 
1 (>19).
Follow the on-screen instructions to make the settings.
≥ Input your encryption key code in “Encryption Key” 
supplied with your Wireless router (Access point).
	*1 Wi-Fi Protected Setup-compatible Wireless router (Access point) may 
have the mark.
*2 An SSID (Service Set...