Panasonic Remote Control Panel AG-RCP30P Operating Instructions

Setup/Admin [1/2]
Rec/Play
Date/Time
OSDTrigger
Management ModeCamera
Registration
Programed Rec
Authentication
Since you are not an administrator, 
you cannot open this menu.
31
The Memory Card Video Recorder 
setup includes items that only an 
administrator is allowed to set up.
  Log in at the Setup/Admin screen.
1.  Use a computer to copy the 
administrator’s officer data to 
a USB memory device.
For details on creating a text file 
with the administrator’s officer data, 
refer to the Operating...

Setup/Admin [1/2]
Rec/Play
Date/Time
OSDTrigger
Management ModeCamera
Registration
Programed Rec
Setup/Admin [2/2]
Radar/GPS
Auto MaintenanceFile Management
Service
32
Rec/Play
  PowerOff Time
Use this function to set the interval 
after which the Memory Card Video 
Recorder and this unit will shut down 
after the ignition switch has been set 
to the LOCK (OFF) position. 
Setting (min.): 
       0/10/20/30/60/90/120/180
  Init Camera Select
Select the camera selected at power-on. 
1:     Color Camera...

33
  Rec Continue Time∗1
Use this function to set recording 
continue time for normal recording 
when a trigger is entered or when 
the [REC] button is pressed.
Setting (min.) :   1/2/5/10/15/20/30/
                60/90/CONTINUE
  PreRec Time (Video)∗2
Use this function to set how much of 
already stored video will be retained 
when a trigger is entered or the 
[REC] button is pressed.
Setting (sec.) : 0/10/20/30/60/90
  PreRec Time (Audio)∗2
Use this function to set how much of 
already stored audio...

34
  Rec Tally Out
Enables or disables output of the 
recording status as the GPIO9 
signal. When enabled, a high level 
(output voltage 5.0 V) indicates 
recording is in progress.
Setting : ENABLE/DISABLE
  Init On Screen Type
Use this function to set On-Screen 
Display used when the power is on.
Setting :  SIMPLE/DETAILS/
LAST
∗1/OFF
  Init Audio Out (Play)
Use this function to set Audio Out 
used when the power is on. 
OFF   :  Audio1 and Audio2 are not 
output. 
1      : Audio1 is output
2      :...

35
Date/Time
  TimeZone
Indicates time difference from world 
standard time. 
Hawaii    :  Hawaiian standard time
Yukon     :  Alaska standard time
Yukon DST :  Alaska daylight saving time
Pacific    :  Pacific standard time
Pacific DST :   Pacific daylight saving time
Mountain   :   Mountain standard time
Mountain DST :  Mountain daylight saving time
Central    :  Central standard time
Central DST :  Central daylight saving time
Eastern   :  Eastern standard time
Eastern DST :  Eastern daylight saving...

36
OSD
  OSD
Use this function to set whether the 
On-Screen Display appears on the 
screen and is included in record files.
Setting : ON/OFF
  Display Position
Use this function to set the display 
position for the On-Screen Display on 
the screen and in record files.
 
L-Upper     : Upper left 
R-Upper     : Upper right 
L-Bottom   :  Lower  left 
R-Bottom  : Lower right
  Trigger
Use this function to turn trigger 
display on or off upon GPIO 1 to 8 
inputs.
Setting : ON/OFF
Note:
The Detailed...

37
  Zoom Limit
Use this function to enter maximum 
zoom ratio.
Setting : ×22/×220
  AGC Level
Use this function to set the level of 
camera input gain control.
Setting : LOW/MID/HIGH/OFF
  Init Backlight
Use this function to turn backlight 
compensation on or off when the 
power is on.
Setting : ON/OFF/LAST
∗1
 Init  AE  Shift
Use this function to adjust 
brightness when the power is on. 
Setting : -2/-1/0/+1/+2/LAST
∗1
 Flip
Use this function to determine 
whether to vertically flip camera 
video image...

38
Management of Officer Setup
  Setting Method
Use one of the following methods to 
enter officer data. 
AUTO    :  
Automatically reads and 
loads officer data for up to 
two persons from a USB 
memory device.
 
MANUAL :  Display the menu on the 
LCD panel, and then read 
in and configure officer 
data from a USB memory 
device on the Officer setup 
top screen
.
LIST     :  Display the menu on the 
LCD panel and allow you 
to set the officer data by 
selecting from the list 
on the Officer setup top...

39
 Connection of Radar
Use this function to specify the radar 
gun connection port.
VPU :   
when connected to the Memory 
Card Video Recorder
OFF : when not connected
Notes: 
•  This unit has no function for 
calculating the speed of the target 
vehicle from the moving own 
vehicle. 
•  No distinction is made between 
the speed of an approaching 
target vehicle and a receding one.
•  Some radar guns come with 
a function for setting conditions 
that enable correct measurement 
of target vehicle speed....

40
Administrator Setup (continued)
  Rec Start Information
 Own  Speed
Use this function to set the speed 
of your own vehicle at the start of 
recording according to set speed 
unit.
Setting : 1 - 500
 Target Speed
Use this function to set the speed 
of the target vehicle at the start of 
recording according to set speed 
unit.
Setting : 1 - 500
 Speed  Unit
Setting : MPH/KPH
Notes: 
•  When both own vehicle speed 
and target vehicle speed are set, 
recording starts as soon as one 
criteria is met. 
•...