Panasonic Remote Control Panel AG-RCP30P Operating Instructions

RETURNMENU
CONTROL PA NELON/
OFF
11
Rear panel
 Speaker
In playback screen mode:
           
Outputs audio. However, 
during [
] slow playback, 
[
] rewind, and [] fast 
forward, audio is not output.
 
In Live screen mode:
           
The audio sound track is 
not normally available. 
Read the instructions 
under “Checking audio” 
on page 21 for details.
 
 Anchoring groove
Provides attachment for a commercially 
available stand.
 Securing screw holes
Use the supplied screws to attach 
a commercially...

IN CAR MIC
CAMERA 1
CONTROL PANEL
GPIO/SERIALUSB
GPS-ANT.
(OPTION)
CAMERA 2AUDIO IN
VIDEO OUTAUDIO OUT
[Front panel]
Align the “   ” and “   ” 
marks to connect.
Control panel cable(included)
Memory Card Video Recorder 
(separately sold)
When connecting :
When removing :
Slide     in the reverse 
direction of the arrow to 
disconnect the connector.
[Rear panel]
RETURNMENU
CONTROL PA NELON/
OFF
12
For details on installation and connections, be sure to consult your supplier.
Connections
White Yellow 

13
Turning the Remote Control Panel On and Off
Turn the vehicle’s ignition switch 
to ON or ACC. 
 This turns on the Memory Card Video 
Recorder and this unit.
On
Turn the vehicle’s ignition switch 
to LOCK (OFF).
  This turns off the Memory Card 
Video Recorder and this unit.
Notes:
•  The power cannot be turned off by 
pressing the [CONTROL PANEL 
ON/OFF] button.
•  
Setting the “PowerOff Time” (see 
page 32) makes it possible to power 
a Memory Card Video Recorder 
and this unit for up to 180 minutes...

Menu
Camera
Audio
Restore
Setup/Info
RecCheck
Archive
Menu
Camera
Audio
Restore
Setup/Info
RecCheck
Archive
Audio
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
Audio2 SelectINCAR
AE[-2  --  +2]0
(Screen example) (Screen example)
TriggerGPIO
Detection OSD
PrintableTrigger1NOFF-
ON
Trigger2NOFF-Trigger3NOFF-Trigger4NOFF-Trigger5NOFF-Trigger6NOFF-Trigger7NOFF-Trigger8NOFF-
Audio
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
Audio2 SelectINCAR
14
1. Press the [MENU] button.
  The...

15
  Returning to previous screen
Press the [RETURN] button to return 
to the previous screen. The menu is 
cleared when the “Archive” screen, 
Officer setup top screen or Setup/
Admin top screen is displayed.
  Long menus
Menus with arrows at the top and 
bottom contain items that are 
currently not shown.
Basic Menu Operations (continued) 

16
Setting up/Deleting Officer Data
•  Once the officer data has been 
read, the USB memory device 
may be removed.
•  Once the officer data has been 
set up, it is not deleted even when 
power is turned off or the mode 
changed.
MANUAL mode
Display the menu on the LCD panel. 
Then read and load the officer data 
from the Officer setup top screen.
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Setup/Info] and press [
] to 
confirm the entry.
3.  Use the [
,] buttons to...

17
LIST mode
Open the menu on the LCD panel and 
read in the officer data registered in 
the Memory Card Video Recorder from 
the Officer setup top screen. 
For details on registering officer data, 
see “Load Officer” in the “Administrator 
Setup” (see page 35).
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Setup/Info] and press [
] to 
confirm the entry.
3.  
Use the [,] buttons to select 
[Officer] and press [
] to 
confirm the entry.
 
The Officer setup top screen...

18
This function is provided to prevent 
incorrect input through the inadvertent 
pressing of buttons.
Locking
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Setup/Info] and press [
] to 
confirm the entry.
3.  Use the [
,] buttons to select 
[Officer] and press [
] to 
confirm the entry.
 The Officer setup top screen appears.
4.  Use the [,] buttons to select 
[Operation Key Lock].
5.  Use the [
,] buttons to select 
“ON”.
The [LOCK] lamp lights, and the 
buttons...

19
Viewing Live Video
Use the functions described below to 
manipulate video output by the camera 
and sound from the microphone.  
Press the [LIVE/ARCHIVE] button to 
view live video. A commercially available 
camera connected to the [CAMERA2] 
connector cannot be controlled.
 Selecting a camera
Press the [CAMERA SELECT] button.
Each press of the button toggles the 
unit between the “CAMERA1” and 
“CAMERA2” inputs. 
CAMERA1 :  Color Camera connected to 
the [CAMERA1] connector
CAMERA2 :  Commercially...

20
Adjusting image brightness
This menu is available only when 
“CAMERA1” is selected.
1.   
Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Camera] and press [
] to 
confirm the entry.
3.  Use the [
,] buttons to select 
[AE [-2 -- +2]].
The AE[-2  --  +2]0appears.
4.  Press the [] button to make 
the image brighter.
Press the [
] button to make 
the image darker.
Set this button to “0” (zero) for 
normal operation.
Note:
When “CAMERA2” is selected in 
[CAMERA SELECT],...