Panasonic Remote Control Eur7722km0 Operation Guide

							Remote Control Operation GuideThis remote control is the key to your home theater experience.
RQT7999-PH0405WM0
Welcome to the world of Home Theater.
First, 
turn on the receiver.
You may need to enter 
a code to operate 
some equipment.
Model No. EUR7722KM0
Now, you can operate 
other Home Theater 
components.
Page 2
Page 3Page 5
Page 4Page 2
Page 4
Page 6
PPC 
						

							DVD PLAYERTV
Switch on the television 
and select input
Switch off
Switch on the player
and start play
Skip items during play Show player 
menus Show disc menus Select and enter
menu items
Stop play
Clear the menus or return to 
the previous menu
Pause play
To view frame-by-frame Search through the disc
Specify a disc (5-disc changer)
Start play from a selected item
Switch on the television and select input
Switch off
Adjust the volume
Change the channels 
sequentially
Select the channel 
directly
Watching DVDsWatching TV
Operating the TV
Operating the DVD player
Start slow-motion play
Switch onSwitch on
With some Panasonic DVD players, press [FUNCTIONS] for 
the “DISPLAY” function.
RQT79992 
						

							DVD RECORDER
The factory setting is [1]. Change the unit’s remote control code to 
match the remote control code of the DVD 
recorder.
For about one second press [ENTER] and 
the button ([1], [2] or [3]) which is the same 
number as the remote control code set by 
the DVD recorder.
When using a Panasonic 
DVD recorder
Check the remote control 
code of the DVD recorder. Preparations:
Switch on the television 
and select input
Switch off
Switch on the recorder 
and start play
Skip items during play Show recorder 
menus Show disc menus Select and enter
menu items
Stop play
Clear the menus or return to 
the previous menu
Pause play
To view frame-by-frame Search through the disc
Start play from a selected item
Watching DVDs
Operating the DVD recorder
Operating the DVD recorder
Select drive
The factory setting is [9]. 1. Press [DVD RECORDER].
2. While pressing [ENTER], press and 
hold [8] for approximately 
    2 seconds. After performing the following 
operations, press this button again.
Start slow-motion play
Switch on
If it does not change
To returnIn step 2 above, while pressing [ENTER], 
press and hold [9] for approximately 
2 seconds.
3 
						

							CD PLAYER
Switch off
Listening to CDs
Specify a disc
[3- or 5-disc changer]
Pause playStop play
Skip tracks during play Switch on the player and start play
Start play from 
a selected track
Start play from a specified disc
[MEGA CD changer] (holds more than 50 discs)
Operating the CD player
VCR
Switch on the television and select input
Switch off
Change the channels 
sequentially
Select the channel 
directly
Watching videotapes
Switch on the player and start play
 Rewind or fast-forward
Stop play
Pause play
Operating the video deck
Switch onSwitch on
Search through the disc(Press and hold)
RQT79994 
						

							RECEIVER
To adjust subwoofer
output level To mute the volume
To adjust the volume
To select
DVD ANALOG 6CH
When you select MUSIC
When you select MUSIC
Select an SFC modeChange 
the sound effect
Select the speaker channel
and adjust its output level
Select a DTS NEO:6 mode:
CINEMA or MUSIC
Change 
the sound effect(Press and hold)
Change the sound effect
DTS NEO:6 MODE
SFC MODE
DOLBY PRO LOGIC  x MODE
Other functions
Switch off
Listening to the radio
Select FM or AM
To cancel
For selecting 
a re-master mode
Dim the display
Adjusting speaker 
channel balance
Start a test signal
Stop the test signalSelect the speaker 
channel and adjust 
its output level
Change the preset 
channels sequentially
Select the preset channel directlySelect radio stations by frequency
Operating the radio
(Press and hold)
To cancel
To cancel
Select MOVIE (DOLBY EX), MUSIC or 
GAME when Dolby Pro Logic   x mode 
or Dolby Pro Logic    mode is on
5 
						

							Press and hold the button 
corresponding to the equipmentEnter the first digit Enter the second digit
Note that this remote control cannot operate some equipment and that it may not be able to perform some operations.Re-enter the codes after you change the batteries. This remote control can operate Panasonic and Technics audio-visual equipment that has remote control sensors. You may need to change the remote 
control code.
It can also operate some other brands of televisions, video cassette players, and DVD players. Check the table for the brand and enter the code as follows.
The remote control outputs the on/off signal. 
If the code is correct, the equipment 
turns on or off. 
If it doesn’t, try entering another code.
CODES
Changing the codes
TV VCRDVD 
player
6