Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

DYNAMICS/DELAY Section
DYNAMICS and/or DELAY processing can be added to each of the DA7
Channels. Pressing the PARAMETER SELECTbutton cycles the current
parameter selections, which are grouped in pairs. The top knob adjusts the
top parameter selection in the pair, and the bottom knob adjusts the bottom
parameter selection in the pair. The DYNAMICS ONLED button toggles the
dynamics processing on (green)and off for the selected channel, and the
DELAY ONLED button toggles the delay on (green)and off.
The...

Chapter 2 
DA7 Users’ Guide2-11
2 
DA7 Tour
AUXSection
This section of the Top Panel contains controls for routing selected channels
from/to outboard sources. These six aux routes are independent of the
channel input connectors on the Rear Panel of the DA7and greatly expand
the flexibility of the mixer. They can be used as six mono sends, or in stereo
pairs (such as 1&2, 3&4, 5&6), and six mono returns, or stereo pairs. There
are two digital aux routes, AUX 1/2, and four analog aux routes, AUX 3/4
and...

Display Bridge
The Display Bridgecontains the information for the current status of the
DA7and the LCD screen. The various windows for the functions and features
of the mixer are displayed on the LCD screen.
BUS Fader Strip
There are four BUS Fader Stripson the DA7. In conjunction with the
Fader Layercontrols, each strip directly controls the BUS outputs, or the
AUX/BUS functions which are indicated on the bottom of the strip, or a user
CUSTOM/MIDIfunction.Chapter 2 
DA7 Users’ Guide2-12
2 
DA7 Tour...

Chapter 2 
DA7 Users’ Guide2-13
2 
DA7 Tour
The SOLO LED button toggles on (red)or off. When on, the selected bus
output will be routed to the MONITOR Aspeakers and headphones,
overriding the previous input.
There are two bus numbers for each strip, indicating the BUS ASSIGN
selections that can be controlled by the strip.
The FLIP LED button flips the BUS Fader Stripfrom controlling one bus to
controlling the other bus for the strip. The LED color (red orgreen)indicates
the current bus selection.
The...

Fader Layer ControlsSection
The Fader Layercontrols significantly expand the flexibility of the DA7
mixer. The LED button selections define the current function for the fader
strips.
LED buttons for the Fader Layer controls assist you in determining or
checking the current channel and bus fader settings on the mixer.
INPUT 1-16, when selected (green), resets the fader strips to control channel
inputs 1 through 16, and buses 1, 3, 5, and 7. When selected, the faders
move to the positions reflecting the...

MONITOR Section
The DA7 provides controls for two monitor outputs and a talkback circuit.
There are source selection LED buttons for the MONITOR Aand MONITOR
Boutputs, and LEVEL knobs for both of the monitor outputs and the
talkback circuit.
MONITOR AControls
The MONITOR Aselection LED buttons route the input selected (green)to
the MONITOR A OUTPUT (CR)(Control Room) connections on the Rear
Panel of the mixer and to the headphones. The selections are:
L/Rroutes the MASTER L/R output to the monitors.
2TR...

MONITOR BControls
The MONITOR Bselection LED buttons route the input selected (green)to
the MONITOR B OUTPUT (STUDIO)connections on the Rear Panel of the
mixer. The selections are:
MONITOR Aroutes the current MONITOR Aselection to the studio
monitors.
AUXroutes the AUX SENDoutputs to the monitors. Press the AUX LED
button to monitor the selections beginning with AUX SEND 1/2,
followed by AUX SEND 3/4, and AUX SEND 5/6. The MEMORY
numeric readout on the Display Bridgewill momentarily display the
AUX...

Chapter 2 
DA7 Users’ Guide2-17
2 
DA7 Tour
UTILITY Button
Pressing the UTILITY button will display the [UTILITY] window group on
the LCD screen in the Display Bridge. The window displayed will be
determined by the window selection buttons at the bottom of the window.
Pressing the UTILITY button again will cycle the window selections:
[OSC_BATT], [CONFIGuration], [USER CuSToM].
See Chapter 16, Utility and Solo Monitorfor additional information.
MIDI Button
Pressing the MIDI button will display the [MIDI]...

SCENE MEMORY Section
SCENE MEMORYallows you to store and recall complete mixer setups and
functions. There are fifty registers, numbered 01 through 50, available for
storage of mixer settings. Memory 00 is reserved for Automation.
Press either the WRITE LED button or the READ LED button (orange)to
select it and display the [ReaD/WriTe]window of the [SCENE MEMORY]
window group on the LCD screen of the Display Bridge. 
There are two windows in the group; [RD/WT], and [XFADE]. The [RD/WT]
window is always...

Chapter 2 
DA7 Users’ Guide2-19
2 
DA7 Tour
There are three mixer functions with associated libraries: CHANNEL,
EQUALIZER, DYNAMICS/DELAY. The library feature allows you to store
and recall individual function parameters to a separate library. There are fifty
registers for each library, numbered 01 through 50.
The RECALL button opens the library window for the selected function.
This means that if the [CHANNEL]window was displayed when you pressed
the RECALLbutton, the CHANNELlibrary will be displayed....