Panasonic Ramsa Audio Mixer Wr Da7 Application Guide

34
3.8 Example of systems for VTR (1 unit), ADAT (1 unit), and BRC 
This is a post-production system consisting of the ADAT and the BRC, in addition to the WR-DA7
and a video recorder. The SMPTE timecode output is generated from the video recorder, this out-
put goes to the BRC. The BRC supplies the timecode and the wordclock to the ADAT and the WR-
DA7. Editing and Automation becomes possible in synchronization with the timecode from the
video recorder. 
Method of connection 
Insert the option card...

35
BRC setting 
To synchronize the BRC with the SMPTE timecode from the video recorder set Locate Reference to
ÔSMPTE InputÕ and Clock Source to ÔInternalÕ by selecting the EXT SYNC setting for the BRC. Then,
turn on the EXT SYNC switch. 
Select the Fixed Mode when the BRC is used as a clockmaster and if the sampling rate is set at
48kHz. Select the Variable Mode when the sampling rate is set at 44.1kHz. Press the PITCH DOWN
switch to setting -147cent ( Ô44.1Õ display). 
For MTC setting, select MIDI in...

36
System configuration -8
WCK MASTERBRC
WR-DA7
SYNC INSMPTE INSMPTE Timecode
MIDI
  INMTC MIDI INREC OUT VIDEO
OUT
MMC MIDI OUT
MIDI
  OUT
WCK OUT
(48kHz OUT)
REMOTE OUT 
        TO ADAT
Sync
CableWORD CLOCK IN
        (75½=ON)
WR-SMPTSMPTE OUT (Phone)
SMPTE IN (XLR)
WR-ADAT
ADAT ID1
VTR
TV
Monitor
DIGITAL
OUT
ININ
OUT
Optical Cable
SLOT 1
(17-24ch)
WR-ADAT
INPUT 1-16
R
SR
Mic
Sampler
Keyboard
SP
MONITOR 
A
SP
Power
AMP
AUX
SENDAUX
RTN
Effector
AB 

37
3.9 Example of systems for VTR (1 unit) and DA-98 (1 unit) 
This is a post-production system consisting of the DA-98, one WR-DA7 and a video recorder. The
SMPTE timecode output is generated from the video recorder and is supplying timecode to the
DA-98. Receiving the SMPTE timecode, the DA-98 supplies the timecode and the wordclock to the
WR-DA7. In this mode, editing operation becomes possible by the use of the AUTOMATION feature
in synchronization with the timecode of the video recorder. In this...

38
To enable the DA-98 to receive digital input from the TDIF-1, press the DIGITAL IN button on the
front panel. 
When the timecode output of the video recorder is generated after being converted to MTC, the
MODE dip switch 6 on the SY-88 rear side is set to OFF. (If this switch is set to ON, the timecode
recorded on the tape is converted into MTC and the resultant output is generated.) 
Use the tape where the recorded timecode has the same frame rate as that of the SMPTE timecode
output generated from...

39
System configuration-9
VIDEO IN
WORD SYNC OUT
(BNC)  SMPTE
Timecode
MIDI
  INMTC MIDI IN
MMC MIDI OUT
MIDI
  OUT TIMECODE
            IN
DA-98 ID1
House Video Sync
WCK MASTER
WR-TDIFTDIF-1 TDIF-1
PW-88DL
(BNC) WORD CLOCK IN
        (75½=ON)
WR-DA7
REC OUT VIDEO
OUT
VTR
TV
Monitor
INPUT 1-16
R
SR
Mic
Sampler
Keyboard
SPSP
Power
AMP
AUX
SENDAUX
RTN
Effector
AB
MONITOR
A 

aV0499-0     DA7ApplicationGuide    Printed in Japan
Ó Matsushita Communication Industrial Co., Ltd.     1999