Panasonic Ramsa Audio Mixer Wr Da7 Application Guide
Here you can view all the pages of manual Panasonic Ramsa Audio Mixer Wr Da7 Application Guide. The Panasonic manuals for DJ Equipment are available online for free. You can easily download all the documents as PDF.
Page 21
24 3.4 Example of systems with 3 DA-88s This is a 24-track digital recording system that uses three DA-88Õs. The DA-88 can generate SMPTE timecode and MTC by using the optional SY-88 SYNC card installed into the DA-88. By using the MIDI connections between the WR-DA7 and the DA-88, it is possible to perform MMC (MIDI Machine Control) from the WR-DA7. Method of connection With the DA7 powered OFF insert the WR-TDIF (option card) in Slot 1, 2, 3 of the WR-DA7 and firmly fasten them to the console with...
Page 22
25 DA-88 setting Since the DA-88 receives digital input data from the TDIF-1, press the DIGITAL IN switch on the control panel. The machine ID number of the DA-88 is 0 for the wordclock master unit. These machine ID num- bers are set at 0, 1, 2, and 3 using the rear rotary switch in the sequential order of the SYNC cable connections attached from SYNC OUT to SYNC IN. (* For the DA-98 and 38, machine ID numbers are set at 1, 2, 3, 4 in the sequential order of the connections.) Press the CHASE switch...
Page 23
26 System configuration-4 WCK MASTER WR-TDIF DA-88 DA-88 DA-88 with SY-88 ID0 WR-DA7 TDIF-1 TDIF-1 WORD SYNC OUT (BNC)(BNC) MIDI INMTC MMC MIDI OUTWORD CLOCK IN (75½=ON) PW-88DL WR-TDIFTDIF-1 TDIF-1 PW-88DL WR-TDIFTDIF-1 TDIF-1 PW-88DL IN SYNC OUT PW-88S IN SYNC OUT PW-88S TerminatorSLOT 1 (17-24ch) SLOT 2 (25-32ch) SLOT 3 (9-16ch) MIDI IN MIDI OUT INPUT 1-8 R SR Mic Sampler ID1 ID2 Keyboard SP CR MONITORAES/EBU SP Power AMP REC OUT2TR A INAUX SENDAUX RTN DAT Effector AB MONITOR B
Page 25
28 WR-DA7 setting To use the WR-DA7 as a slave unit, set the SOURCE SELECT to ÔWCK INÕ in the INPUT SET window of the D-I/O Setup Section on the MASTER unit. (For wordclock synchronization using the DA98Õs connection slot, set the SOURCE SELECT to ÔSLOT1Õ on the MASTER WR-DA7. Keep ÔWCK INÕ on the SLAVE unit.) To establish communication between the tandem WR-DA7 units, set the PORT SELECT to ÔTO PCÕ in the SERIAL I/O SETUP in the MIDI SETUP screen for both the MASTER and SLAVE units. Then set the baud...
Page 26
29 WR-DA7 MIDI INMMCMTC MIDI OUT WR-TANDM SYNC OUTSLOT 1 (17-24ch) (MASTER) (MASTER) (SLAVE)SLOT 2 (25-32ch) SLOT 3 INPUT 1-16WORD CLOCK OUT (75½=OFF) To PC WORD CLOCK IN (75½=ON) To PC MIDI IN MIDI OUT MIDI OUT MIDI IN WR-DA7 IN SLOT 1 (17-24ch) (SLAVE) SLOT 2 (25-32ch)SLOT 3 INPUT 1-16 WR-TANDM WCK MASTER WR-TDIF DA-98 ID1 TDIF-1 TDIF-1 WORD SYNC OUT (BNC)(BNC) WORD CLOCK IN (75½=OFF) PW-88DL WR-TDIF DA-38 ID2 TDIF-1 TDIF-1 PW-88DLIN SYNC OUT PW-88S PW-88S WR-TDIFTDIF-1 TDIF-1...
Page 27
30 3.6 Example of systems for analog 16-track recorder (1 unit) This is an editing system that uses AUTOMATION. The SMPTE timecode is recorded in the 16th tape track of the analog 16-track recorder and the system works off this timecode. Method of connection Insert the option card WR-ADDA (Slot 1, 2) and WR-SMPTE in the WR-DA7 and firmly fasten them to the main body with the supplied screws. Connect the IN/OUT terminal using the recommended cable(Part # DA/DB-XLR M-F: Available in the USA) of the...
Page 28
31 System configuration -6 WCK MASTER WR-ADDA 16Track Analog Multitrack Recorder Track16 Analog OutOUT 8 8 WR-SMPTSMPTE INSLOT 1 (17-24ch) (XLR) INPUT 1-16 WR-ADDAOUTIN 8 8 SLOT 2 (25-32ch) R SR Mic Sampler WR-DA7 Keyboard MTR SP CR MONITORAES/EBU SP Power AMP REC OUT2TR A INAUX SENDAUX RTN DAT Effector AB MONITOR B
Page 29
32 3.7 Example of systems for Digital Video Recorder (1 unit) This is a post-production system consisting of the WR-DA7 and the Digital Video Recorder. The audio signals are connected using the AES/EBU digital audio option card. The WR-DA7 receives SMPTE timecode from the Digital Video Recorder for itÕs editing and automation operations. Method of connection Insert the option card of WR-AESS (Slot 1) and the WR-SMPTE (option card) in the WR-DA7 and fasten them to the console using the supplied screws....
Page 30
33 System configuration -7 WR-SMPT WR-DA7 SW-OFF REF OUTSMPTE OUT (XLR) DIGITAL IN/OUTDIGITAL I/O (XLR)(D-sub 25pin) (BNC) REF IN V-SYNC IN(BNC) SMPTE IN(XLR) House Video Sync SLOT 1 (17-24ch) WCK MASTER INPUT 1-16 Digital Video Recorder WR-AESS SW=AES/EBU R SR Mic Sampler Keyboard SP CR MONITORAES/EBU SP Power AMP REC OUT2TR A INAUX SENDAUX RTN DAT Effector AB MONITOR B