Panasonic Pv Gs50 Operating Instructions Manual

61
Creating a Title
You can create a title and record on a Memory Card.
1Camera Mode: 
Slide the [TAPE/CARD/CARD MODE] Selector to 
[CARD MODE] until the [PICTURE] Indication 
appears.
Set the Lens to the image you want to use for 
creating a title.
VCR Mode:
Search for the image you want to use for creating a 
title and set the Palmcorder to the Still Playback 
Mode.
2Set [CARD SETUP] >> [CREATE TITLE] >> [YES].
3Press the [PHOTO SHOT] Button.≥The title is stored.
≥To perform PhotoShot again, select...

62
Inserting a Title
You can select one of your original titles and display it. (It can be 
displayed in Camera Mode, VCR Mode, and Card Playback Mode.)
1Press the [TITLE] Button.
≥The title that was created last is displayed. 
2Press [MULTI] Button.
≥A list of titles is displayed. 1
3
Rotate the [PUSH] Dial to select a desired title.
≥The selected title is marked with a red frame.
4Press the [PUSH] Dial or press the [MULTI] Button.
≥The selected title is displayed.
5Using the [TAPE/CARD/CARD MODE]...

63
Protecting the Files on a Memory Card 
from Accidental Erasure 
(File Lock) 
Precious files recorded on a Memory Card can be locked to prevent 
accidental erasure. (Even if files are locked, the files will be deleted 
when the Memory Card is formatted.)
After setting the Palmcorder to the Card Playback Mode 
(l56).....
1Set [CARD FUNCTIONS] >> [CARD EDITING] >> 
[FILE LOCK] >> [YES].
≥The [FILE LOCK] 1 Menu is displayed.2Rotate the [PUSH] Dial to select [PICTURE] or 
[TITLE], and then press it....

64
1, 2, 4
1, 2
3PHOTO
SHOT
MENUPUSHMF / VOL / JOG W.B / SHUTTER / IRIS
Deleting the Files Recorded on a Memory 
Card
Using the Palmcorder, you can delete the still picture files and titles 
recorded on a Memory Card. After the file is deleted, it cannot be 
restored.
At first, slide the [TAPE/CARD/CARD MODE] Selector to [CARD] to 
select the type of data to be erased.
After setting the Palmcorder to the Card Playback Mode 
(l56).....
To Select and Delete File(s) by selection
1Set [CARD FUNCTIONS] >>...

65
1
NOW FORMATTING
1, 2
MENUPUSHMF / VOL / JOG W.B / SHUTTER / IRIS
DPOF SETTING
(PRINT QUANTITY)
PUSH MENU TO EXIT2
1, 2, 3, 4, 5
MENUPUSHMF / VOL / JOG W.B / SHUTTER / IRIS
1
Formatting a Memory Card
If a Memory Card becomes unreadable by the Palmcorder, 
formatting it may make it reusable. Formatting will delete all the data 
recorded on a Memory Card.
After setting the Palmcorder to Card Playback Mode (l 56).....
1Set [CARD FUNCTIONS] >> [CARD EDITING] >> 
[CARD FORMAT] >> [YES].
2Select [YES] and...

66
Copying your DV Cassette to an S-VHS or 
VHS Cassette 
(Dubbing)
After connecting the Palmcorder and the S-Video, Video and 
Audio Input Jacks 
A of the VCR as illustrated on the left, start 
the following procedure.
≥Be sure to press the [OSD] Button on the Remote Controller before 
copying so that no indications are left visible. Otherwise, the 
displayed tape counter and Function indications are also copied.
[Palmcorder]
1Insert the recorded Cassette.
[VCR]
2Insert a blank Cassette with an erasure...

67
Using your Palmcorder with Digital Video 
Equipment 
(Dubbing) 
By connecting this Palmcorder with other digital video equipment 
(such as another Palmcorder of the same format/model) that has a 
DV input/output terminal, and using a 4-pin to 4-pin DV Interface 
cable PV-DDC9/PV-DDC9-K (optional) 
1, high quality images and 
sounds can be dubbed in the digital mode.
[Playback Unit A]
1Insert the recorded Cassette and set the Palmcorder 
to the VCR Mode.
[Recording Unit 
B]
2Insert a Cassette to be...

68
Using the Software with a Computer
An image stored on the DV Cassette can be transferred to your 
Personal Computer.
ªSoftware Installation (Windows)
1Turn on Computer and start up Windows.
2Insert supplied CD-ROM into the CD-ROM drive.
≥[Setup Menu] 1 appears.
3Select the software to be installed from 
[Setup Menu].
≥USB Driver (l69):
Software for USB Driver allows you to transfer images directly 
from the memory card into the computer. (Please refer to page 
69 to install the driver of the USB...

69
Installing USB Driver
Please install USB Driver first before connecting the Palmcorder to 
your Personal Computer with the USB Connection Cable.
1Turn on the Personal Computer and start up 
Windows.
2Insert the supplied CD-ROM into the personal 
computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
3Finish installation by following the on-screen 
instructions.
≥Click [Next] and proceed with installation.
≥Carefully read the license agreement on the window, and if you 
agree click...

70
Connecting Computer and Palmcorder
Install USB Driver before connecting.
Never connect the USB Connecting Cable until the USB Driver 
is installed.
Before making these connections, turn off all devices which are to 
be connected.
1Install the supplied USB Driver.
2Insert memory card into Palmcorder, then set card 
playback mode.
3Use auxiliary USB Connection Cable to connect.
≥PC connecting mode.
1) Palmcorder
2) USB Connection Cable
3) USB terminal 
4) Personal computer (not supplied)
≥After making...