Panasonic Pv Gs33 Operating Instructions Manual

Recording Mode
-31-
Deleting All the Captured Multi-Pictures
While 9 multi-pictures are displayed, press the 
[MULTI] Button.
≥If [MANUAL] has been selected, press the 
[MULTI] Button after 9 pictures are displayed.
To Display the Multi-Pictures Again
Press the [MULTI] Button for 1 second or longer.
To Delete Multi-Pictures One by One(When pictures were captured in [MANUAL])
When the [MULTI] Button is pressed for 1 second 
or longer while the still pictures are displayed, the 
pictures captured last are...

Playback Mode
-32-
Playback Mode
Playing Back a Tape
The recorded scene can be played back 
immediately after the recording.
1Set the [OFF/ON] Switch (42) to [ON].
≥The [POWER] Lamp (43) lights up.
2Set the Mode Dial (39) to Tape Playback 
Mode.
3Press the [6] Button (13) to rewind the 
tape.
≥Rewind the tape to the point where you want 
to start playback.
≥When the tape reaches the beginning, 
rewinding stops automatically.
4Press the [1] Button (11) to start playback.
≥The [!] Indication appears.
≥If a...

Playback Mode
-33-
ªVariable Speed Search FunctionThe speed of Cue Playback or Review Playback 
can be varied.
1During playback, press the [1] Button (11).
≥The [1k!] Indication appears.
2Push the [W/T] Lever (36) to select a desired 
search speed.
The following 6 playback speeds are available for 
the Variable Speed Search Function in both the 
fast-forwarding and rewinding directions: 
1/5k (slow playback in SP Mode only), 1/3k 
(slow playback in LP Mode only), 1k, 2k, 5k, 
10k and 20k.
≥This function...

Playback Mode
-34-
Index Search Functions
To facilitate searching for desired scenes, this 
Camcorder automatically records index signals 
during recording, as explained in the following.
Photoshot Index Signal
These signals are automatically recorded 
whenever still pictures are taken in Photoshot 
Mode (
-22-). Photoshot Index Signals are not 
recorded on still pictures recorded in Continuous 
Photoshot Mode.
Scene Index Signal
Scene Index Signals are automatically recorded 
when you start recording...

Playback Mode
-35-
To Change the Zoom Magnification
2Change the magnification by pressing the 
[W] Button or [T] Button (62) on the Remote 
Controller.
To Change the Enlarging Area of an Image3Press the Arrow Button (π, ∑, ∏, ∫) (56) 
on the Remote Controller that points to the 
area you want to enlarge.
To Cancel the Playback Zoom FunctionPress the [P.B. ZOOM] Button (74) on the 
Remote Controller.
≥For other notes concerning this item, see 
-50-.
Playback Digital Effect Functions
During playback,...

Playback Mode
-36-
Playing Back on Your TV
By connecting your Camcorder with your TV, the 
recorded scenes can be viewed on your TV 
screen.
≥Before connecting them, turn off the power of 
both the Camcorder and TV.
1Connect the [A/V OUT] Jack of the 
Camcorder and the Video and Audio Input 
Jacks of the TV.
≥Connect to the TV with the AV Cable 1. If the 
TV has an S-Video Jack, connect the S-Video 
Cable 2, too.
≥When plugging the pin plug of the AV cable 
into the [A/V OUT] Jack, plug it in as far as...

Editing Mode
-37-
Editing Mode
Audio Dubbing
You can add music or narration to the recorded 
Cassette.
≥If the tape recorded in the [16bit] Mode is 
dubbed with the Audio Dubbing function, the 
original sound is erased. (If you wish to 
preserve the original sound, use the [12bit] 
Mode when recording.)
≥Audio Dubbing cannot be performed on a 
recording made in LP Mode. (
-20-)1Press the [;] Button (69) on the Remote 
Controller where you want to add new 
sound.
2Press the [A.DUB] Button (55) on the...

Editing Mode
-38-
Using the DV Cable for Recording
(Digital Dubbing)
By connecting this Camcorder with other digital 
video equipment (such as another Camcorder of 
the same format/model) that has a DV 
input/output terminal, and using a 4-pin to 4-pin 
DV Interface cable PV-DDC9 (optional) 1, high 
quality images and sounds can be dubbed in the 
digital mode.
Player/Recorder:
1Insert the Cassette and set to Tape 
Playback Mode.
Player:
2Press the [1] Button (72) to start playback.
Recorder:
3While...

With a PC (optional)
-39-
With a PC (optional)
Using the Software with a Computer
Following Software is not supplied with the 
Camcorder;
≥LSFT0577 (DV STUDIO 3.1E-SE)
≥K1HA05CD0005 (USB Cable)
An image stored on the DV Cassette can be 
transferred to your Personal Computer. If you 
would like to order, please refer to page 
-59-.
ªSoftware Installation (For Windows)1Turn on Personal Computer and start up 
Windows.
2Insert the CD-ROM into the Personal 
Computer’s CD-ROM drive.
≥The [Setup Menu] screen...

With a PC (optional)
-40-
≥A message indicating a conflict between 
versions may be displayed during the 
installation. This will not cause a problem. 
Simply click [Yes] to proceed with the 
installation.
≥Depending on the OS version, illustrations and 
icon names may vary.
Windows 98SE/Me Users
The following messages may be displayed when 
connecting this Camcorder and your personal 
computer via USB Cable.
1For Windows 98SE Users:
The message, “Please insert the disk 
labeled ‘Windows 98 Second...