Panasonic Pv Dv52 Operating Instructions Manual

31
VCR
Special Effect Feature
1Press  (PLAY) to start playback.
2Press JOG KEY for about 1 second.
3Rotate JOG KEY to adjust the
playback speed.
Rotate JOG KEY clockwise for
forward playback.
Rotate JOG KEY counterclockwise
for reverse playback.
To return to normal playback:
Press 
 (PLAY). Playback will continue at
normal speed.
The Variable Speed Search function
offers a choice of six playback speeds
(1/5X (LP mode: 1/3X), 1X, 2X, 5X, 10X,
20X) both in forward and reverse
directions.
The review...

32For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Strobe Multi Mode
1Set POWER to VCR.
2Press MENU to display the menu
screen.
3Rotate and press JOG KEY to select
and set MULTI SETTING .
4Press JOG KEY repeatedly to set
desired speed.
Press MENU twice to exit.
5Press  (PLAY) to start playback.
Press 
 (MULTI) at the point you want
to start capturing.
A succession of 9 screens will be
captured, and playback will stop.
Press 
 (PLAY) to start...

33
VCR
Back of TV
Audio In Video In
Special Effect Features
To Video In To Audio In
A/V OUT
A/V Cable
(Supplied)
1Set POWER to CAMERA or VCR.
To view what the Palmcorder is
recording or to playback a tape on your
TV.
2Turn your TV ON and set it to LINE
INPUT.
Check your TV operating instructions
for further information.
3Start playback or begin a recording.
Make sure the Palmcorder and TV are
turned off while connecting.
Please connect the A/V Cable securely.
[ TV with AUDIO/VIDEO IN Jacks ]
View...

34For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
CAMERA mode
Zoom Out (“W”) Zoom In (“T”)
5POWER
    ZOOM
D.ZOOM
The normal optical zoom functions from
1X to 10X.
As magnification increases, resolution
significantly decreases.
Because the image is enlarged digitally,
the picture may become distorted when
higher magnification levels are used.
When the level falls below 10X, the
normal zooming function will resume.
Focus distance becomes 1.2 m...

35
Digital Features
Digital Features
VCR mode
1Set POWER to VCR.
2Press MENU to display the VCR
MENU screen.
3Rotate JOG KEY to select PLAY
 FUNCTION , then press JOG KEY
to display the VCR PLAY FUNCTION
menu screen.
4Rotate JOG KEY to select D.ZOOM ,
then press JOG KEY to select ON.
Press MENU twice to exit.
5Press  (PLAY) to start playback.
The center portion of the image
doubles in size.
6Repeat steps 2~4 to select OFF to
cancel this feature.
5PLAY
Color recording of video or still images onto
the...

36For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Digital Features
EIS ON NORMAL
1Set POWER to CAMERA.
2Press EIS to stabilize the picture.
Picture flicker may be observed when
taping under fluorescent lighting
conditions.
The EIS indicator flashes when the
light level is inadequate.
Turn D.E.I.S. OFF during recording
when using a tripod.
3Press REC/PAUSE to start recording.
4Press EIS again to cancel.
 Be sure that D.E.I.S. is turned off
when...

37
Digital Features
Digital Features
1Set POWER to CAMERA or VCR.
2Press MENU to display the menu
screen.
3Rotate JOG KEY to select
 D.FUNCTION in the CAMERA mode
menu screen or PLAY FUNCTION in
the VCR mode menu screen, then
press JOG KEY to display the
CAMERA FUNCTION or VCR PLAY
FUNCTION menu screen.
4Rotate JOG KEY to select
 D.FUNCTION , and then press JOG
KEY repeatedly to select one of the
Digital Functions listed on the left.
5To cancel the Digital Function, press
JOG KEY repeatedly to select...

38For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Editing Features
The original sound can be replaced with
new sound using the built-in Palmcorder
microphone.
Audio Dubbing using the
Built-in Microphone
1Set POWER to VCR.
2Press  (PLAY). Then press
 (PAUSE) where you  want dubbing to
begin.
3Press MENU to display the VCR mode
menu screen.
4Rotate JOG KEY to select REC MODE ,
then press JOG KEY to display the
VCR REC MODE menu screen.
5Rotate JOG KEY...

39
Editing Features
Editing Features
6Press  (PAUSE) to start Audio
Dubbing. “A.DUB 
” indication
appears.
Connect the Palmcorder to the TV in
order to monitor the sound.
(p. 33)
Only NTSC (National Television Standards
Committee) recorded tapes can be audio
dubbed. The following screen appears if
the tape was not recorded in NTSC format.
7Press  (PAUSE) to stop Audio
Dubbing. To listen to the desired audio sound, set
the AUDIO setting of the VCR mode MENU
(Menu OSD: p. 61) as follows:
If the...

40For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Editing Features
Video In
VHF Connecting
Cable (not
supplied)TV
(To View)
A/V Cable
(Supplied)
To Audio In
To Video In
Recording:
VCR (Rear)
For technical reasons, dubbing a tape
may reduce its quality.
If the Time Code is displayed in the EVF
or LCD monitor, it cannot be reset.
Only the DATE/TIME, when displayed,
will be recorded on the tape.
    CAUTION:Unauthorized exchanging and/or
copying of...