Panasonic Pv Dv202 Operating Instructions Manual

71
PC Connection
5Click [Upload To Photo Album] to
upload the Still Image or [Upload To
Video Album] to upload the Motion
Image.
The “PictureStage Video (Image)
Uploader” screen is displayed.
Click [Exit] to exit uploader.
6Enter your login ID and password,
and then click [Continue].
Click [Free Sign up] if you have no
login ID. The PictureStage Home
Page opens and there you can
get a login ID and password.
7Click [View Manager] to display the
View Manager screen, and then click
[for internet] on the...

72For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Transferring Your Images (i.LINK) (Windows)
DV Interface Cable (i.LINK)
(6-to-4 pin) (not supplied)
PC Connector
DV Input/Output
(i.LINK)
Connector
PC Connection with DV Interface Cable (i.LINK)
For more detailed information regarding editing software products
from these companies, please visit their websites at:
www.justedit.com
www.pinnaclesys.com
A video clip can be transferred directly to your PC...

73
PC Connection
Using Tape Image DataBefore you beginInsert a recorded Tape. (p. 11)
Make Palmcorder-PC connections.
(p. 72)
Turn your PC on.
Set Palmcorder POWER to VCR.
Run the Software after the DV
Interface Cable (i.LINK) has been
connected to the Palmcorder.
1Repeat steps 1~4 on page 60 to
run the PHOTOVU/MPEG4 Movie
Messenger™ System.
When the DV Interface Cable (i.LINK)
is connected, the input display will
automatically become DV. If it is not
DV, please confirm the connection.
Then, close...

74For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
3Click on [Detail].
4Click on [Movie Capture] at the
point you wish to capture a Motion
image.
The screen to select the start frame is
displayed.
5Select the start frame for the
segment to be captured select one
frame, and click [Select].
“Now Searching...” is displayed, and
the DV tape is rewound to the point
at which the capture was started.
“Now capturing a movie.” is
displayed.
6Click on...

75
PC Connection
Palmcorder USB Device Driver/SD Drive
3
2
USB TerminalUSB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to M-CARD.
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CONNECT WITH PC” appears in the EVF or the LCD monitor.
The “Found New Hardware Wizard” screen of Windows is displayed.
The following message       is displayed. Even so, functionality confirmation has
been performed at our manufacturer.
Click [Continue Anyway] and proceed.
Follow the...

76For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
For Windows 2000 users
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
“CONNECT WITH PC” appears in the EVF or the LCD monitor.
The “Found New Hardware” screen of Windows is displayed.
When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed. Even so, functionality...

77
PC Connection
Palmcorder USB Device Driver/SD Drive
Using Memory Card Image
DataBefore you beginInstall the Palmcorder USB Device
Driver. (p. 56)
Set POWER to OFF before inserting a
recorded Memory Card. (pp. 48, 49)
Make Palmcorder-PC connections.
(pp. 75, 76)
Turn your PC on. (p. 75) By connecting the Palmcorder and PC with
the USB, you can transfer Still images
saved on the Memory Card directly to your
PC.
For Windows 98SE/Me/2000
users
1Connect the Palmcorder to your PC
using the USB Cable...

78For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Palmcorder File Converter
Using Palmcorder File
Converter
You can convert the JPEG data of your PC
into DCF (Design rule for Camera File
System) data, and transfer this data to your
Palmcorder via USB.1Set Palmcorder POWER to M-CARD.
2Connect the Palmcorder to your PC
using the USB Cable (supplied).
(pp. 58, 59)
3Click on “Start,” “(All) Programs,”
“Panasonic,” “Palmcorder,” then
“File Converter...

79
PC Connection
Palmcorder File Converter
6Select the folder to which the
converted file is to be saved.
The Conversion results screen is
displayed.
7Use “Help” for detailed instructions.
When selecting “To convert
format for Panasonic Digital
Palmcorder”
5Select the file to be converted.
6Select the drive to which the
converted file is to be saved.
The Conversion results screen is
displayed.
7Use “Help” for detailed instructions.
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
83 

80For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Web Camera
Please read this first
Conditions for Use
You have direct dial-up connection capability to the internet.
Also, you and the other person(s) are in the same Network (LAN).
Microsoft MSN Messenger Service 4.5 or newer/Windows NetMeeting 3.01 or newer is
installed.
For Windows xp users, Windows Messenger 4.5 or newer is installed.
It is convenient if the person you want to access is already...