Panasonic Pv Dv103 Operating Instructions Manual

31
VCR
R
1Press PLAY for more than 5 seconds
in STOP mode.
The Palmcorder will go into Repeat
Playback mode when the tape
reaches its end.
The letter “R 
” will appear in the
EVF and LCD monitor.
2Turn the Palmcorder OFF to exit the
Repeat Playback mode.
1PLAY
EVF/LCD
Playback Your  Recordings
1, 2
VOLUME
1Set POWER to VCR.
2Press MENU to display the VCR
FUNCTIONS menu screen.
3Rotate JOG KEY to select
 PLAYBACK FUNCTIONS , then
press JOG KEY to display the
PLAYBACK FUNCTIONS menu
screen.
4Rotate JOG...

32For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Special Effect Features
BPLAY
A, BFAST FORWARD/
SEARCH
A, BREWIND/
SEARCH
Sound is muted during all special effects.
ADuring playback, hold down (FAST FORWARD/SEARCH) or
 (REWIND/SEARCH).
The search will continue for as long
as the button is held down.
OR
BPress  (FAST FORWARD/
SEARCH) or  (REWIND/SEARCH)
once for a continuous rapid visual
search.
Press 
 (PLAY) to release.
When executing a rapid...

33
VCR
Special Effect Features
Note
1Forward Slow:
Press  SLOW/F.ADV during play.
Reverse Slow:
Press 
 SLOW/F.ADV during play.
2Press PLAY to release. (During
reverse slow motion playback, time
code indication may not change
regularly.)
Palmcorder will automatically STOP when
in slow motion for more than 10 minutes.
During slow motion playback, picture may
move up and down. This is normal.
When you start or stop slow motion
playback, the picture may become bluish
for an instant.
Slow Motion Playback...

34For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
1During Still mode, rotate JOG KEY to
advance or reverse the picture one
frame at a time.1JOG KEY
Frame by Frame Advance
Note
1Press PAUSE during playback.
2Press  SLOW/F.ADV to do a frame
by frame advance.
Press 
 SLOW/F.ADV to do a frame
by frame reverse.
3Press PLAY to release.
If you hold down SLOW/F.ADV, you can
see a continuous series of still images at
a slower speed than normal slow mode....

35
VCR
BINDEX SEARCH
    (rewind)
Top Scan
If you hold down INDEX SEARCH more
than 2 seconds, the Palmcorder will scan
for scenes (or PhotoShots) and playback
the first few seconds of each.
To cancel this function, press PLAY or
STOP.
BINDEX SEARCH
    (fast forward)
APlace the Palmcorder in the VCR
STOP mode.
BPress INDEX SEARCH fast forward or
rewind for the number of recordings
(indexes) forward or back you want to
view. The Palmcorder will advance or
rewind to the desired recording and
automatically...

36For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Strobe Multi Mode
1Set POWER to VCR.
2Press MENU to display the VCR
FUNCTIONS menu screen.
3Rotate JOG KEY to select
 PLAYBACK FUNCTIONS , then
press JOG KEY to display the
PLAYBACK FUNCTIONS menu
screen.
4Rotate JOG KEY to select MULTI
 SPEED in the PLAYBACK
FUNCTIONS menu screen.
(Menu OSD: p. 67)
5Press JOG KEY repeatedly to set
desired speed.
Press MENU to exit.
6Press  (PLAY) to start...

37
VCR
Back of TV
Audio In Video In
Special Effect Features
To Video In To Audio In
A/V OUT
A/V Cable
(Supplied)
1Set POWER to CAMERA or VCR.
To view what the Palmcorder is
recording or to playback a tape on your
TV.
2Turn your TV ON and set it to LINE
INPUT.
Check your TV operating instructions
for further information.
3Start playback or begin a recording.
Make sure the Palmcorder and TV are
turned off while connecting.
Please connect the A/V Cable securely.
(Optional Remote Control Only)
You can...

38For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
CAMERA mode
Zoom Out (“W”) Zoom In (“T”)
5POWER
    ZOOM
D.ZOOM
The normal optical zoom functions from
1X to 10X.
As magnification increases, resolution
significantly decreases.
Because the image is enlarged digitally,
the picture may become distorted when
higher magnification levels are used.
When the level falls below 10X, the
normal zooming function will resume.
Focus distance becomes 1.2 m...

39
Digital Features
Digital Features
VCR mode
1Set POWER to VCR.
2Press MENU to display the VCR
FUNCTIONS menu screen.
3Rotate JOG KEY to select DIGITAL
 EFFECT , then press JOG KEY
to display the DIGITAL EFFECT menu
screen.
4Rotate JOG KEY to select D. ZOOM ,
then press JOG KEY to select ON.
Press MENU to exit.
5Press  (PLAY) to start playback.
The center portion of the image
doubles in size.
6Repeat steps 2~4 to select OFF to
cancel this feature.
5PLAY
Color recording of video or still images onto...

40For assistance,  please call :  1-800-211-PANA(7262) or send e-mail to : [email protected]
Digital Features
EIS ON NORMAL
1Set POWER to CAMERA.
2Press EIS to stabilize the picture.
Picture flicker may be observed when
taping under fluorescent lighting
conditions.
The EIS indicator flashes when the
light level is inadequate.
Turn D.E.I.S. OFF during recording
when using a tripod.
3Press REC/PAUSE to start recording.
4Press EIS again to cancel.
 Be sure that D.E.I.S. is turned off
when...