Panasonic Pv Dc352 Operating Instructions Manual

							21
2
RECORD
REC
4
PAUSE
PAUSE
1CAMERA
VCR
CARD 
P.B.
1
AUTOMANUMANUALALFOCUSFOCUS
5
2TAPECARDCARD MODE
3
OFFONMODE
3, 
4
CAMERA Mode
Recording
1Set the [OFF/ON/MODE] Switch to [ON].
≥The [CAMERA] Lamp lights up. 1
2
Slide the [TAPE/CARD/CARD MODE] Selector towards 
[TAPE].
3Press the Recording Start/Stop Button.
≥Recording starts.
≥After the [RECORD] indicator is displayed, it changes to [REC]. 2≥The Tally Lamp (LED Lamp) 3 lights up during recording and alerts 
those being recorded that recording is in progress. The Tally Lamp 
does not light up if the [TALLY LED] on the [OTHER FUNCTIONS] 
Sub-menu is set to [OFF].
4Press the Recording Start/Stop Button again to pause the 
recording.
≥[PAUSE] is displayed. 4
≥If the Recording Pause Mode continues for more than 5 minutes, the power 
is turned off automatically for tape protection and power conservation. To 
resume recording from this condition, turn on the power again.
≥When recording while the Mode Selector Switch is set to [AUTO] 
5, the 
Palmcorder automatically adjusts the focus and white balance. (In some 
cases, they cannot be adjusted automatically and need to be adjusted 
manually.) (l 26, 27)
ªTo Check the Recording
By pressing the [S] Button 6 in the Recording Pause Mode, you can play 
back the last few seconds of the recorded scene.
≥[CHK]
 is displayed. After checking, the Palmcorder resumes the Recording 
Pause Mode.
ªTo View the recorded scene while the Recording is 
paused
 (Camera Search)
The recorded scene can be viewed by holding down the [SEARCHj] Button 6 or [SEARCHi] Button 7 in the Recording Pause Mode.
The Camera Search function is useful for finding the starting point of a new 
scene to create a smooth transition from one scene to another.
≥When the [SEARCHj] Button is pressed, images are played back in the 
reverse direction.
≥When the [SEARCHi] Button is pressed, images are played back in the 
forward direction.
ªSelf-Recording
By opening the LCD Monitor and turning it so that it faces forward (to the lens 
side), you can let the subject in front of the Palmcorder monitor the shot while 
shooting is in progress.
≥When the LCD Monitor is opened, the Viewfinder is disabled automatically. 
However, when the LCD Monitor is rotated forward, the image is also 
shown in the Viewfinder.
≥If you prefer to have the image on the LCD Monitor to look like an image in 
a mirror, set [SELF-REC] on the [OTHER FUNCTIONS] Sub-Menu to 
[MIRROR]. (Mirror Mode) Images are recorded normally and no left and 
right reversal occurs.
≥If [MIRROR] is selected, only recording Indication [¥], recording pause 
Indication [¥;], Card Mode Indication [ ] and Remaining Battery Power 
Indication [x] are displayed 
8.
≥If a general Warning/Alarm Indication [°] appears, return the LCD Monitor 
to the original position in order to check the specific content of the Warning/
Alarm Indication.
ªTo Finish the Recording
Set the [OFF/ON/MODE] Switch to [OFF].
≥For other notes, see page 61.
87 6
°
x
SEARCHSEARCH
MJ147-P.book  21 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							22
1tW
5tW
10tW
Z.MICT
T
T
1
1
JUMP
TELE JUMP
2
TAPE
CARDCARD MODE
PHOTOSHOT
PhotoShot Recording on the DV Cassette
With this function, you can record still pictures with sound for approximately 
7 seconds each on the Cassette. 
1Slide the [TAPE/CARD/CARD MODE] Selector to [TAPE].
2Press the [PHOTO SHOT] Button in the Recording Pause 
Mode.
≥The Palmcorder records a still picture for about 7 seconds and then 
switches back to the Recording Pause Mode.
≥PhotoShot Recording results in slightly inferior image quality.
ªProgressive PhotoShotTM Mode
With the Progressive PhotoShotTM Mode, you can record still pictures with 
higher resolution than with the normal PhotoShot Function.
≥After setting [PROGRESSIVE] on the [CAMERA SETUP] Sub-menu to [ON] 
or [AUTO], press the [PHOTO SHOT] Button in the Recording Pause Mode. 
[æ] is displayed. 
1≥This Function may not work with some function settings. (l 61)
≥If you select Card Mode, [PROGRESSIVE] is set to [ON].
ªContinuous PhotoShot
If the [PHOTO SHOT] Button is held down with the [SHUTTER] of the 
Sub-Menu [OTHER FUNCTIONS] set to [ON], the Palmcorder will record still 
images without interruptions every 0.7 seconds until the button is released. 
≥The screen blinks and, at the same time, a shutter clicking sound is 
recorded. (This function, however, is not enabled when Progressive 
PhotoShot is set to [ON] or [AUTO].)
ªDigital Still Picture
When the [CAMERA STILL] Button 2 is pressed, images become still 
pictures. When the Button is pressed again, the Digital Still Picture Mode is 
cancelled.
≥We recommend that you press the [CAMERA STILL] Button first at the 
position where you want to record the picture and then press the 
[PHOTO SHOT] Button.
≥For the still pictures taken in the Continuous PhotoShot Mode or Digital Still 
Picture Mode, PhotoShot index signals are not recorded.
≥For other notes, see page 61.
~~~~~~~~~~~~~~~~~~~~~~~~
Zoom In/Out Functions
The Zoom function can be used to record objects close by or to achieve a 
wide-angle shot.
1For wide-angle shots (zoom out): 
Press the [W/T] zoom lever towards [W].
For close-ups (zoom in): 
Press the [W/T] zoom lever towards [T].
≥Zoom magnification is displayed for a few seconds.
≥Generally speaking, when the [W/T] zoom lever is pressed farther towards 
[W] or [T], the zooming speed gradually increases.
1.5 Times Tele Jump Zoom Function
By pressing the [TELE JUMP] Button, the image on the screen will be 
instantly magnified 1.5 times.
≥The [ ] Indication appears.
≥You cannot use the 1.5 Times Tele Jump Zoom Function in the Card Mode.
Taking Close-up Shots of Small Subjects (Macro Close-up Function)
When the zoom magnification is 1a, the Palmcorder can focus on a subject 
that is as close as approximately 0.8 inches (20 mm) from the lens. With this 
feature, small subjects such as insects can be recorded.
To Use the Zoom Microphone Function
Along with the zooming operation, the microphone’s directional angle and 
sensitivity are varied for recording sounds.
≥Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> [ZOOM MIC] 
>> [ON]. (The [Z.MIC] Indication is displayed.
 1)
≥For other notes, see page 61.
JUMP
PHOTOPHOTO
PHOTO
1
PHOTO
12TAPECARDCARD MODE2
PHOTOSHOT
CAMERA STILL
147P_text.fm  22 ページ  ２ ０ ０ ２年４月２ ４日　水曜日　午後３時３ ２分 
						

							23
25tWT
D.ZOOM
1
2
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
EIS1
1
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
12
1, 3
2
FADE
OFFONMODE
Digital Zoom Function
This function is useful when you want to record close-up shots of subjects 
located beyond a normal zoom range of 1t to 10t magnification. With the 
Digital Zoom Function, you can select a magnification of 25t or 700t.
1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> 
[D.ZOOM] >> [25
t
tt t] or [700t
tt t].
≥25k: Digital zooming to 25t
≥700k: Digital zooming to 700t
2To zoom in or out, press the [W/T] zoom lever towards [T] or 
towards [W].
Canceling the Digital Zoom Function
Set [D.ZOOM] on the [CAMERA SETUP] Sub-menu to [OFF].
≥For other notes, see page 61.
~~~~~~~~~~~~~~~~~~~~~~~~~
Digital Electronic Image Stabilizer Function
If you are recording in unstable situations and the Palmcorder is shaky, you 
can use this function to correct for camera shake for these images.
≥If the Palmcorder shakes too much, this function may not be able to 
stabilize images.
1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [EIS] >> 
[ON].
≥The [EIS] Indication 1 appears.
Canceling Digital Electronic Image Stabilizer
Set [EIS] on the [CAMERA SETUP] Sub-Menu to [OFF].
EIS function may not work when...
≥Palmcorder movement is too extreme.
≥Recording a subject with distinct horizontal or vertical stripes.
≥Recording in low light situations.
≥Recording a subject under a great amount of fluorescent light.
≥Recording a scene with very fast movement.
≥For other notes, see page 62.
~~~~~~~~~~~~~~~~~~~~~~~~~Fade In/Out FunctionsFade In 1
Fade In brings out images and sounds gradually from a black screen at the 
beginning of a scene.
1Hold down the [FADE] Button while the Palmcorder is set to 
the Recording Pause Mode.
≥The image fades out gradually.
2When the image is completely gone, press the Recording 
Start/Stop Button to start recording.
3Release the [FADE] Button about 3 seconds after starting 
recording.
≥The image reappears gradually.
Fade Out 2
Fade Out causes images and sounds to disappear gradually, leaving a black 
screen at the end of a scene.
1Hold down the [FADE] Button while recording.
≥The image fades out gradually.2About 3 seconds after the image is completely gone, press 
the recording Start/Stop Button to stop recording.
3Release the [FADE] Button.
≥For other notes, see page 62.
MJ147-P.book  23 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							24
Cinema Function
This function is for recording in a cinema-like wide screen.
1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> 
[CINEMA] >> [ON].
≥Black bars appear at the top and bottom of the screen. 1
To Cancel the Cinema Mode
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA] >> [OFF].
≥For other notes, see page 62.
~~~~~~~~~~~~~~~~~~~~~~~~
Backlight Compensation Function
This function prevents a recording subject from being recorded too dark in 
backlight. (Backlight is the light that shines from behind a recording subject.)
1Press the [BACKLIGHT] Button.
≥The [ª] Indication 1 flashes and then is displayed.
To resume normal Recording
Press the Backlight Button [BACKLIGHT].
≥When the [BACKLIGHT] Button is pressed, the entire screen becomes 
brighter.
≥By operating the [OFF/ON/MODE] Switch, the Backlight Compensation 
Function is cancelled.
≥This function cannot be used when the Iris is set.
~~~~~~~~~~~~~~~~~~~~~~~~MagicPix Function
This function allows you to record color images brightly in a dark place 
without using a light.
1Press the [MAGICPIX] Button.
≥The [MAGICPIX] Indication 1 appears.
To Cancel the MagicPix Function
Press the [MAGICPIX] Button.
≥For other notes, see page 62.
ª
1BACKLIGHT
1
1
MAGICPIX
1MAGICPIX
1
CINEMA
1
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
MJ147-P.book  24 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							25
1
WIND - CUT
1
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
Quick Start
When this feature is activated, you can resume recording quickly even if the 
Palmcorder goes into standby mode (when left in Pause mode for 5 minutes).
Palmcorder will be ready for shooting in approximately 1.5 seconds when the 
Power switch is turned [OFF] and back to [ON] again. To activate this feature, 
press the [QUICK START] button to turn on the Quick Start Lamp.
1Press the [QUICK START] Button.
≥The Quick Start Recording Lamp 1 lights up.
2Set the [OFF/ON/MODE] Switch to [OFF].
≥The Quick Start Recording Lamp remains lit.
3Set the [OFF/ON/MODE] Switch to [ON].
≥The Palmcorder will be ready for recording in approximately 
1.5 seconds.
≥For other notes, see page 62.
~~~~~~~~~~~~~~~~~~~~~~~~~Wind Noise Reduction Function
This function reduces the noise that the wind makes as it hits the microphone 
during recording.
1Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> 
[WIND-CUT] >> [ON].
≥The [WIND-CUT] Indication 1 appears.
To Cancel the Wind Noise Reduction Function
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> [WIND CUT] >> 
[OFF].
≥For other notes, see page 62.
~~~~~~~~~~~~~~~~~~~~~~~~~
Recording in Special Situations (Program AE)
Select optimal automatic exposures under specific recording situations.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> 
[PROG.AE] >> a desired Mode [
5], [7], [4], [Ω], [º].
≥The Indication of the selected Mode is displayed.
[5] Sports Mode 
1For recording scenes involving quick movements, such as sports scenes.
[7] Portrait Mode 2
Focuses on the main subject of the image and leaves the background slightly 
out of focus.
[4] Low Light Mode 
3
Preserves the mood of dim light settings without altering picture brightness.
[Ω] Spotlight Mode 4Neutralizes the additional brightness created by a spotlight.
[º] Surf & Snow Mode 
5Compensates for excessive illumination from sun glare to produce a clear 
picture.
Canceling the Program AE Function
Set [PROG.AE] on the [CAMERA SETUP] Sub-Menu to [OFF]. Or, set the 
Mode Selector Switch to [AUTO].
≥For other notes, see page 62.
1
3
2
4
5
2
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
1AUTOMANUMANUALFOCUSFOCUS
3 2
1
1STARTQUICKUICK
OFFONMODE
MJ147-P.book  25 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							26
Manual Shutter Speed Adjustment
Useful for recording fast-moving subjects.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication 1 appears.
2Press the [PUSH] Dial repeatedly until the shutter speed 
Indication 
2 appears.
3Rotate the [PUSH] Dial to adjust the shutter speed.
The Range of Shutter Speed Adjustment
1/60–1/8000
The standard shutter speed is 1/60 second.
Selecting a speed closer to [1/8000] causes the shutter speed to be faster, 
resulting in crisper captures of moving subjects but a lower light level.
≥When the progressive function is [ON], a speed only up to 1/500 can be 
used.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO].
≥For other notes, see page 63.
~~~~~~~~~~~~~~~~~~~~~~~~Manual Iris Adjustment (F Number)
You can use this function when the screen is too bright or too dark.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication 1 appears.
2Press the [PUSH] Dial repeatedly until the Iris Indication 2 
appears.
3Rotate the [PUSH] Dial to adjust the iris.
Adjustable Range of the Iris
CLOSE (Closed), F16, ..., F2.0,
OP (Opened) i0dB, ..., OPi18dB
When the Gain-up Mode [GAIN-UP] is used.
Iris adjustment is by OPi15dB.
When a value closer to [CLOSE] is selected, the image becomes darker.
When a value closer to [OPi18dB] is selected, the image becomes brighter.
The value to which idB is attached indicates a gain value. If this value is too 
large, the quality of the image deteriorates.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO].
≥For other notes, see page 63.
~~~~~~~~~~~~~~~~~~~~~~~~Manual Focus Adjustment
Focus can be adjusted manually for recording in a situation where auto focus 
may not function well.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication 1 appears.
2Set the Mode Selector Switch to [FOCUS].
≥The [1MF] Indication (Manual Focus Mode) 2 appears.
3Rotate the [PUSH] Dial to adjust the focus.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO].
MNL
1/60
       F2.01
2
2, 3
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
1AUTOMANUAL
ALFOCUS
MF MNL1
2
3
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
1, 2AUTOMANUMANUALFOCUSFOCUS
MNL
1/1000
1
2
2, 3
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
1AUTOMANUMANUALFOCUSFOCUS
MJ147-P.book  26 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							27
Recording in Natural Colors (White Balance)
Depending on the scene or light conditions, the Automatic White Balance 
Adjustment Mode may not be able to bring out natural colors. In such a case, 
the white balance can be adjusted manually.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2Press the [PUSH] Dial.
≥The [AWB] Indication appears.
3Rotate the [PUSH] Dial to set a desired White Balance Mode.
1 Automatic White Balance Adjustment [AWB]2 Indoor Mode (shooting under incandescent lighting) [{]3 Outdoor Mode [z]
4 Fluorescent light Mode [|]5 The White Balance setting that was previously set manually [1]
To Resume Automatic Adjustment
Rotate the [PUSH] Dial until the [AWB] Indication appears. Or, set the Mode 
Selector Switch to [AUTO].
≥When power is turned on with the Lens Cap on, the Automatic White 
Balance Adjustment may not function properly. Please turn on the 
Palmcorder after removing the Lens Cap.
≥For other notes, see page 63.
~~~~~~~~~~~~~~~~~~~~~~~~~
Adjusting White Balance Manually
When the Auto White Balance Adjustment function does not operate suitably 
under the existing light conditions, use the Manual White Balance Adjustment 
mode. 
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication 1 appears.2Press the [PUSH] Dial.≥The [AWB] Indication appears.3Rotate the [PUSH] Dial until the [1] Indication 2 is 
displayed.
4Point the Palmcorder at a full-screen white subject, and then 
keep the [PUSH] Dial pressed until indication [
1] 
    stops 
flashing.
≥When the [1] Indication flashes after turning the Palmcorder on, the 
previously adjusted white balance setting is still kept.
To Resume Automatic Adjustment
Rotate [PUSH] Dial until the [AWB] Indication is displayed. Or, set the Mode 
Selector Switch to [AUTO].
ªAbout White Balance Sensor 
The White Balance Sensor 3 determines the nature of the light source 
during recording.
≥Do not cover the White Balance Sensor with your hand during recording. 
Otherwise, White Balance will not work normally.
Use of Auto White Balance Adjustment in inappropriate lighting conditions 
may result in reddish or bluish images. Where the subject is found on the left, 
but surrounded by many light-sources, Auto White Balance Adjustment may 
not operate properly. In such a case, we suggest that you adjust the White 
Balance.
1) The range that is controlled by the Auto White Balance Adjustment Mode 
of this Palmcorder
2) Blue sky
3) Cloudy sky (Rain)
4) TV screen
5) Sunlight
6) White fluorescent light
7) Halogen light bulb
8) Incandescent light bulb
9) Sunrise and sunset
10) Candlelight
≥For other notes, see page 63.
10 000K
9 000K
8 000K
7 000K
6 000K
5 000K
4 000K
3 000K
2 000K
1 000K2)
1)3)
4)
5)
6)
7)
8)
9)
10)
MNL
11
2
2, 3, 4
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
1AUTOMANUMANUALFOCUS
3
1
1AW B1
4
1312
5
1
2, 3
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
1AUTOMANUMANUALALFOCUSFOCUS
MJ147-P.book  27 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							28
1
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
ß £
43
PHOTOSHOT4
2
3
OFFONMODE
4
FLASHON
OFF
CAMERA STILL
2 1
Using the Free Angle Flash
The Built-in Flash enables you to record still pictures in a dark place. 
Rotating the Flash enables you to light up objects from the upper angle even 
if the Palmcorder is inclined horizontally. 
1
1
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>  
[FLASH] >> [ON] or [AUTO].
≥If [AUTO] is selected, Flash is lighted if light is needed by sensing the 
surrounding luminosity.
2Rotate the Flash to [ON].
≥When it is set to [ON] or above, this flash will be ready for use.
3Press the [CAMERA STILL] Button.
≥Flash is activated.
4Press the [PHOTO SHOT] Button or Recording Start/Stop 
Button.
≥Flash is not lit, when the Palmcorder is in recording mode.
≥If either [ß], [ßi] or [ßj] Indication is lit, flash will light. If [ß] is flashing 
or not displayed, Flash will not fire.
≥Do not cover the Flash Sensor 
2 with your hand during recording.
Adjusting Brightness of the Flash
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> [FLASH LEVEL] 
>> a desired Flash Level.
≥For recording under normal conditions, set it to [NORMAL]. (The [ß] 
Indication 
3 appears).
≥If the brightness is not enough in [NORMAL] setting, set it to [i] (the [ßi] 
Indication appears), if it is too bright, set it to [j] (the [ßj] Indication 
appears).
To reduce the “Red Eye” effect
[CAMERA FUNCTIONS] >> [RECORDING SETUP] >> 
[RED EYE REDUCTION] >> [ON].
≥The [£] Indication 
4 appears.
≥For other notes concerning this item, see 63.
MJ147-P.book  28 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							29
Digital Effect Functions
This Palmcorder is equipped with digital effect functions that add special 
effects to the scene.
Digital Effects 1 [EFFECT1]
1) [MULTI] Multi-Picture Mode 
2) [P-IN-P] Picture-in-Picture Mode 
3) [WIPE] Wipe Mode
4) [MIX] Mix Mode
5) [STROBE] Strobe Mode 
≥Records images with a stroboscopic effect.
6) [GAIN-UP] Gain-up Mode 
≥Brightens images electronically.
≥Adjust focus manually when using this Mode.
7) [TRAIL] Trailing Effect Mode 
≥Records images with a trailing effect.
8) [MOSAIC] Mosaic Mode
≥Produces a mosaic-like image.
9) [MIRROR] Mirror Mode 
≥The right half of an image becomes a mirror image of the left half.
Digital Effects 2 [EFFECT2]
10) [NEGA] Negative Mode
≥The colors of the recorded image are inverted as seen in a negative.
11) [SEPIA] Sepia Mode
≥Records a scene with a brownish tint, like the color of old pictures.
12) [MONO] Black & White Mode
≥Records an image in black and white.
13) [SOLARI] Solarization Mode
≥Records an image with a painting-like effect.
Selecting a desired digital effect
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or 
[EFFECT2] >> a desired digital effect.
Canceling the digital effect
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or 
[EFFECT2] >>[OFF].
≥If the Palmcorder is turned off, the [EFFECT2] settings are cancelled.
≥For other notes, see page 63.
ªWipe Mode and Mix Mode
Wipe Mode:
Like a curtain being pulled, the still picture of the last recorded scene 
gradually changes to the moving image of a new scene.
Mix Mode:
While the moving image of a new scene fades in, the still image of the last 
recorded scene gradually fades out.
1Set [DIGITAL EFFECT] >> [EFFECT1] >> [WIPE] or [MIX].
2Exit the menu by pressing the [MENU] Button.
≥The [WIPE] or [MIX] Indication appears.
3Press the Recording Start/Stop Button to start the 
Recording.
4Press the Recording Start/Stop Button to pause the 
Recording.
≥The last scene is stored in memory. The [WIPE] or [MIX] Indication 
changes to [B] or [C].
5Press the Recording Start/Stop Button to restart the 
Recording.
≥The last image of the previous scene gradually changes to the new 
scene.
≥For other notes, see page 63.
3) WIPE 4) MIX 1) MULTI 2) P-IN-P
5) STROBE
6) GAIN-UP7) TRAIL
8) MOSAIC 9) MIRROR
10) NEGA 11) SEPIA
12) MONO 13) SOLARI
WIPEMIX
WIPE
WIPE
MIX
MIX
1, 2
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
OFFONMODE
3, 4, 5
MJ147-P.book  29 ページ  ２００２年４月２４日　水曜日　午後１時５６分 
						

							30
ªMulti-Picture Mode
Strobe Multi-Picture Mode 1:
You can capture and record 9 consecutive small still pictures.
Manual Multi-Picture Mode 
2:
You can manually capture and record 9 small still pictures.
After setting [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> 
[EFFECT1] >> [MULTI].....
1Set [MULTI-PICTURES] >> [SCAN MODE] >> [STROBE] or 
[MANUAL].
When [STROBE] is selected:
≥Set the [SPEED] to a desired strobe speed.
[FAST]: You can capture 9 consecutive still pictures within
approximately 1 second
[NORMAL]: You can capture 9 consecutive still pictures within 
approximately 1.5 seconds
[SLOW]:You can capture 9 consecutive still pictures within 
approximately 2 seconds
≥If you set [SWING] on the [MULTI-PICTURES] Sub-Menu to [ON], the 
intervals at which the 9 still pictures are taken are longer at the 
beginning and end than in the middle of the swing strobe period, and it 
is useful for analyzing swing motion, etc., in sports.
When [MANUAL] is selected:
≥You can select a desired scene one at a time up to 9 small pictures.
2Exit the menu by pressing the [MENU] Button.
3Press the [MULTI] Button.
≥If [MANUAL] is selected, press the [MULTI] Button at each scene you 
want to capture.
4Press the Recording Start/Stop Button or the [PHOTO SHOT] 
Button to record on the Cassette.
Deleting all the captured Multi-Pictures
While 9 multi-pictures are displayed, press the [MULTI] Button.
≥If [MANUAL] has been selected, press the [MULTI] Button after 9 pictures 
are displayed.
To Display the Multi-Pictures again
Press the [MULTI] Button for 1 second or longer.
To Delete Multi-Pictures one by one
(When pictures were captured in [MANUAL])
When the [MULTI] Button is pressed for 1 second or longer while the still 
pictures are displayed, the picture captured last is deleted. If you keep 
pressing the [MULTI] Button, the pictures are deleted continuously.
≥After still pictures are deleted, they cannot be displayed again.
≥For other notes, see page 63.
ªPicture-in-Picture Mode
You can display a sub-screen (still picture) inside the screen.
After setting [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> 
[EFFECT1] >> [P-IN-P]......
1Select [P-IN-P] on the [MULTI-PICTURES] Sub-Menu and set 
the position (
1234) where you want to insert a small still 
picture.
2Exit the menu by pressing the [MENU] Button.
3Aim the Palmcorder at the scene you want to capture and 
press the [P-IN-P] Button to insert a small still picture.
≥A small still picture is displayed in a Normal picture.
≥If the [P-IN-P] Button is pressed again, the small still picture is cleared.
4Press the Recording Start/Stop Button or the [PHOTO SHOT] 
Button to record on the Cassette.
≥For other notes, see page 63.
1
2
4PHOPHOTOSHOSHOT
3MULTI/
P-IN-P
1 1, 2
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
OFFONMODE
4
12
34
4PHOPHOTOSHOSHOT
3MULTI/
P-IN-P
1 1, 2
PUSHW.B./SHUTTER/IRIS/
MF/VOL/JOG
MENU
OFFONMODE
4
MJ147-P.book  30 ページ  ２００２年４月２４日　水曜日　午後１時５６分