Panasonic Projector PT-LX270U User Manual
Here you can view all the pages of manual Panasonic Projector PT-LX270U User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
Appendix ENGLISH - 51 Appendix Appendices Appendix Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector. Connection J Pin assignments and signal names J Mini DIN 3-pin (female) Outside viewPin No.Signal nameI/O TXDOUT RXDIN GNDGND Communication conditions J Signal levelRS-232C-compliantCharacter length8 bits Sync....
Page 52
Appendix 52 - ENGLISH Appendix Basic format J Transmission from the computer begins with STX, then the command, parameter, and ETX are sent in this order. Add parameters according to the details of control. STXC1C2C3 : P1 P2Pn ETX When sending commands without parameters, a colon (:) is not necessary .: Basic format (with sub command) J STXC1C2C3 : ETX S1S2S3S4S5 EP1P2P3P4P5P6 When transmitting a command which does not need a parameter, the operation (E) and parameter are not : necessary. End (1...
Page 53
Appendix ENGLISH - 53 Appendix Control commands J When controlling the projector from a computer, the following commands are available: [Projector control command] CommandControl contentsRemarks PONPower [ON] POFPower [OFF] IISINPUT selection (Parameter) VID = Video RG = Computer HD1 = HDMI OSHAV mute function Turning off the projection and sound temporarily. Sending the command switches [ON]/[OFF]. Do not switch ON/OFF in a short period of time. AMTVolume mute function0 = OFF 1 = ON QPWPower query000 =...
Page 54
Appendix 54 - ENGLISH Appendix Other terminals Pin assignments and signal names of J terminal Outside viewPin No.Signal names : Not assigned - , , : GND terminals R/PR G/G SYNC/Y B/PB + 5 V DDC data HD/SYNC VD DDC clock Pin assignments and signal names of terminal J Outside viewPin No.Signal names , , , , : Not assigned - , : GND terminals R/PR G/G SYNC/Y B/PB HD/SYNC VD Pin assignments and signal names of terminal J Outside viewPin No.Signal namesPin No.Signal names T.M.D.S data 2+T.M.D.S...
Page 55
Appendix ENGLISH - 55 Appendix List of compatible signals The following table specifies the types of signals compatible with the projectors. Format : V = VIDEO, R = RGB, Y = YPBPR, H = HDMI ModeDisplay resolution *1 (dots) Scanning frequencyDot clock frequency (MHz)Format Plug and play *3 H (kHz)V (Hz)COMPUTERHDMI NTSC/NTSC4.43/ PAL-M-15.7559.9-V-- PAL/PAL-N/ SECAM-15.6350.0-V-- 525i (480i) 720 x 480i15.7359.913.50Y-- 720(1 440) x 480i (*2)15.7359.927.00H-o 625i (576i) 720 x 576i15.6350.013.50Y-- 720(1...
Page 56
Appendix 56 - ENGLISH Appendix ModeDisplay resolution *1 (dots) Scanning frequencyDot clock frequency (MHz)Format Plug and play *3 H (kHz)V (Hz)COMPUTERHDMI SXGA1 280 x 1 024 63.9860.0108.00R/Hoo 79.9875.0135.00R/Hoo 91.1585.0157.50R/H-- 1366x7681 366 x 76847.7259.884.75R/Hoo SXGA+1 400 x 1 05065.3260.0121.75R/Hoo UXGA1 600 x 1 20075.0060.0162.00R/Hoo *1: “i” added to the resolution value indicates an interlaced signal. *2: HDMI signal of 480i and 576i is only supported by 27 MHz Dot clock signal. *3:...
Page 57
Specifications ENGLISH - 57 Appendix Specifications Model No.PT- LX300UPT-LX270U Power supplyAC 100 V -240 V 50/60Hz Power consumption 100 V -240 V 2.7 A -1.0A, 218 W100 V -240 V 2.4 A -0.9A, 218 W Standby power consumption 0.5 W When [VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off]. z 1.2 W When one or more among [VGA Out (Standby)]/[In Standby Mode (Audio)] is/are z set to [On]. DLP panel Panel size14.0 mm (0.55") (Aspect ratio 4:3) Display methodDLP chip Pixels786 432...
Page 58
Specifications 58 - ENGLISH Appendix Model No.PT-LX300UPT-LX270U Terminals COMPUTER IN 1 set, high-density D-Sub 15p (female) [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω) HD/SYNC TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible SYNC/HD and VD are not compliant with 3 value composite SYNC [YPBPR signal] Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75...
Page 59
Specifications ENGLISH - 59 Appendix Dimensions Lens Center Lens Center 42.4 (1.67)44.3 (1.74) 88.2 (3.47) 100.6 (3.96) 3.7° Max. 286.3 (1 1.27) 192.0 (7.56) 110.0 (4.33) 55.0 (2.17) 82.3 (3.24) 77.8 (3.06) 57.8 (2.28) 77.0 (3.03) 167.7 (6.60) 11 8.7(4.67) 63.0 (2.48) 10.5 (0.41) 125.5 (4.94) Actual dimension may differ by product.:
Page 60
Ceiling mount bracket safeguards 60 - ENGLISH Appendix Ceiling mount bracket safeguards Installation work of the ceiling mount bracket should only be carried by a qualified technician. z Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused z by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions. Remove an unused ceiling mount bracket promptly. z Ensure to use a torque driver and do not...