Panasonic Projector PT-LX270U User Manual

Operating Instructions
Functional Manual
DLP™ Projector  Commercial Use
Thank you for purchasing this Panasonic Product.
Before operating this product, please read the instructions carefully, and save this manual  J
for future use.
Before using your projector, be sure to read “Read this first!” (See pages 2 to 8). J
Model No.PT-LX300U

PT-LX270U
ENGLISH
TQBJ0608 

2 - ENGLISH
Important 
 
Information
Read this first!
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 
TO RAIN OR MOISTURE.
Power Supply:This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.
CAUTION:The AC power cord which is supplied with the projector as an accessory can o\
nly be used for 
power supplies up to 125 V, 10 A. If you need to use higher voltages or currents than this, you will 
need to obtain a separate 250 V power...

Read this first!
ENGLISH - 3
Important 
 
Information
FCC NOTICE (USA)
Declaration of Conformity
Model Number:  PT-LX300U / PT-LX270U
Trade Name:  Panasonic
Responsible Party:  Panasonic Corporation of North America
Address: One Panasonic Way, Secaucus, NJ 07094
Telephone number:  (877)803-8492
E-mail:  [email protected]
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this...

Read this first!
4 - ENGLISH
Important 
 
InformationWARNING:
POWER „
The wall outlet or the circuit breaker shall be installed near the equip\
ment and shall be easily 
accessible when problems occur. If the following problems occur, cut off the power supply 
immediately.
Continued use of the projector in these conditions will result in fire or electric shock.
If foreign objects or water get inside the projector, cut off the power supply. z
If the projector is dropped or the cabinet is broken, cut...

Read this first!
ENGLISH - 5
Important 
 
Information
WARNING:
Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
If installation is not carried out and secured correctly it can cause in\
jury or accidents, such as electric shocks.
Do not use anything other than an authorized ceiling mount bracket. z
Be sure to use the wire provided with the projector mount bracket for ce\
iling mount as an extra safety  z
measure to prevent the projector from falling...

Read this first!
6 - ENGLISH
Important 
 
InformationWARNING:
ACCESSORIES „
Do not use or handle the battery improperly, and refer to the following.
Failure to observe this will cause burns, battery to leak, overheat, explode or catch fire.
Do not use unspecified battery. z
Do not disassemble coin cell battery. z
Do not heat the battery or place them into water or fire. z
Do not allow the + and  z- terminals of the battery to come into contact with metallic objects suc\
h as 
necklaces or hairpins....

Read this first!
ENGLISH - 7
Important 
 
Information
CAUTION:
POWER „
When disconnecting the power cord, be sure to hold the power plug and po\
wer connector.
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric 
shocks will result.
When not using the projector for an extended period of time, disconnect \
the power plug from the wall 
outlet.
Failure to do so may result in fire or electric shock.
Disconnect the power plug from the wall...

Read this first!
8 - ENGLISH
Important 
 
Information
Trademarks
Windows• ®, Windows Vista®, and Internet Explorer® are registered trademarks or trademarks of Microsoft 
Corporation in the United States and other countries.
Macintosh, Mac OS and Safari are the trademarks of Apple Inc. registered in the United States and other • 
countries.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of • 
HDMI Licensing LLC in the United States and other...

ENGLISH - 9
For details, see the corresponding pages.
1. Set up your projector.  
(Æpage 21)
2. Connect with other devices.  
(Æpage 24)
3. Connect the power cord.  
(Æpage 26)
4. Power on. 
(Æpage 28)
5. Select the input signal.  
(Æpage 29)
6. Adjust the image.  
(Æpage 29)
-  Up to 3 000 lm* of brightness in a 
compact body, weighting 2.3 k].
-  High contrast ratio up to 4 000:1 
makes images with excellent detail 
and depth. 
-  Quiet 29 dB design does not 
interrupt meetings or classes. (Lamp 
power...

10 - ENGLISH
Important 
 
Information
Preparation
Getting Started
Basic Operation
Settings
Maintenance
Appendix
ContentsBe sure to read “Read this first!”. ( pages 2 to 8)
Important Information
Read this first! ...........................................2
Contents ...................................................10
Precautions for Use.................................12
Cautions when transporting ..........................................12
Cautions when installing...