Panasonic Projector Pt Lw80nte Operating Instructions

Menu Navigation
ENGLISH - 31
Settings
 OPTION
 SECURITY
 WIRELESS
INPUT GUIDEpage 37
DETAILEDSIMPLE
OFF
STARTUP LOGOpage 37
ONOFF
USER
COMPUTER2 SELECTpage 37
INPUTOUTPUT
RGB/YPBPRpage 37
AUTO
RGB YPBPR
WIDE MODEpage 37
OFF
ON
LAMP POWERpage 38
STANDARDECO-MODE
LAMP RUNTIMEpage 38
POWER OFF TIMERpage 38
DISABLE
15 MIN. 20 MIN.
25 MIN. 30 MIN.
35 MIN. 40 MIN.
45 MIN. 50 MIN.
55 MIN. 60 MIN.
DIRECT POWER ONpage 38
OFFON
CONTROL PANELpage 38
VALIDINVALID
AUTO SETUPpage 38
AUTOBUTTON
SIGNAL SEARCHpage 38...

ENGLISH - 32
Settings
PICTURE menu
Depending on the projection environment, you can use 
these preset parameter settings to optimise image 
projection. Press I H to cycle through the options.
You can adjust the contrast of the projected image. 
Adjust the BRIGHTNESS in advance if necessary.
You can adjust the brightness of the projected image.You can adjust the colour saturation of the projected 
image. (Available with signals of VIDEO/S-VIDEO/
YP
BPR only)
You can adjust the skin tone in the projected...

PICTURE menu
ENGLISH - 33
Settings
You can perform more detailed image adjustment 
manually.
JFor S-VIDEO/VIDEO signals
QTV-SYSTEM
When the video signal is changed, the setting 
switches automatically. You can switch the setting 
manually to match the video data. Press I H to 
cycle through the options.
QSTILL MODE
You can reduce the vertical flicker when projecting 
a still image.
 OFF: Deactive
 ON: Active
QNOISE REDUCTION
You can switch the automatic noise reduction 
system on/off. Press I H to select...

ENGLISH - 34
Settings
POSITION menu
If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
the keystone will be corrected automatically. Press I H 
to select the required setting.
 ON: Active
 OFF: Deactive
If you need to correct the angle of the projection even 
when the REALTIME KEYSTONE is activated, you can 
correct the keystone manually.You can move the projected image for fine adjustment. 
Press I H to move horizontally and F G...

POSITION menu
ENGLISH - 35
Settings
You can switch the aspect ratio manually when needed. 
Press I H to cycle through the options.
JAspect ratio options
QAUTO
Signals which contains an identifying aspect signal 
will be detected and automatically project the 
image in proper ratio.
Q4:3
When a 4:3 or 5:4 signal is detected, the image will 
be projected without any change, and other signals 
will be adjusted to 4:3 with preserving original ratio.
Q16:9
When a 16:10, 16:9 or 15:9 signal is detected, the...

Settings
POSITION menu
ENGLISH - 36
JAspect ratio depend on signals 
and SCREEN FORMAT menu 
option
If the 4 edges of an image is partly dropped, you can use 
this function to adjust and project it properly. (Not 
available with signals of COMPUTER/WIRELESS)
 H: Enlarge
 
I:Shrink
If the projected image is degraded, you can activate 
FRAME LOCK for synchronisation. Press I H to select 
the required option. (Available with signals of RGB only)
 OFFDeactive
 ONActive
SCREEN 
FORMAT 
menu
ASPECT menu...

ENGLISH - 37
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.
You can switch the logo on/off that is displayed when 
starting up the projector. Press I H to select the 
required option. STARTUP LOGO will be displayed for 
30 seconds.
 ONActive
 USERDisplay the original text
 OFFDeactive
QEditing the original text
If you select USER, you can display a...

Settings
OPTION menu
ENGLISH - 38
You can adjust the power of the lamp to save electricity, 
prolong the lamp life and reduce the noise.
 STANDARDWhen higher luminance is required
 ECO-MODEWhen lower luminance is sufficient
You can check how long the lamp has been used.
You can set the off timer to switch off the power of the 
projector after a certain period of time automatically 
when no signal is detected. Press I H to select the 
required period from 15 to 60 minutes at intervals of 
5 minutes.
You...

OPTION menu
ENGLISH - 39
Settings
When installing the projector, select the projection 
method according to the projector position. Press I H 
to cycle through the options. See “Projection method” on 
page 18.
If you use the projector at high elevation, the ALTITUDE 
setting need to be HIGH to set the fan speed high. Press 
I H to select the required option.
 LOWThe fan speed is low.
 HIGHThe fan speed is high.
Select the required screen format by pressing IH.
 16:10When project on a 16:10 or 4:3...

Settings
OPTION menu
ENGLISH - 40
You can perform more detailed setting in various items.
JOSD DESIGN
You can change the background colour of the 
menu. Press I H to select the required option.
JSXGA MODE
Switch to the SXGA setting when inputting SXGA 
signal. Press I H to select the required option.
JBLACKBOARD
You can exclude the BLACKBOARD in the menu 
items of PICTURE MODE in PICTURE menu. 
Press I H to select the required option.
 ONInclude the BLACKBOARD in menu 
items.
 OFFExclude the BLACKBOARD...