Panasonic Projector Pt Lw80nte Operating Instructions

Basic Operation
Switching the projector on/off
ENGLISH - 21
Before switching on the projector, make sure the mains lead and all the other devices are connected correctly.
See “Connections” on page 19 and “Mains lead” on page 20.
QBy control panel operation
Make sure CONTROL PANEL in OPTION menu is 
set to VALID. The POWER button is locked to 
prevent malfunction and the POWER LOCK 
indicator lights in red.
1. Press the RELEASE button.
 The POWER LOCK indicator goes off.
 Without any operation in 10...

Basic Operation
Switching the projector on/off
ENGLISH - 22
JBy control panel operation
Make sure the CONTROL PANEL setting in 
OPTION menu is set to VALID.
1. Press the POWER button.
 The confirmation screen will be displayed.
 Without any operation for 10 seconds or press any 
button other than the POWER button, the 
confirmation screen will go off and return to the 
projection.
2. Press the POWER button again in 10 seconds.
3. The POWER indicator will flash in orange.
  The projector is cooling the...

Basic Operation
Switching the projector on/off
ENGLISH - 23
The POWER indicator informs you the status of the 
power and the POWER LOCK indicator shows the 
status of the RELEASE button.
 When the TEMP indicator is flashing, the POWER and 
POWER LOCK indicators will not light. See “TEMP 
indicator” on page 44.
JPOWER LOCK indicator status
JPOWER indicator status
POWER and POWER LOCK indicators
POWER
indicator POWER LOCK
indicator
Indicator statusStatus
No illumination or flashing No power is supplied....

ENGLISH - 24
Basic Operation
Projecting an image
1. Switch on the connected devices.
 Press the play button of the required device.
2. Detect the input signal automatically.
3. Switch the aspect ratio automatically.
1. Place the projector at the right angle from the 
screen.
2. Adjust the vertical angle of the projector.
 Press the front leg adjuster buttons and adjust the 
vertical angle.
 See “Front leg adjusters and throwing angle” on 
page 18.
3. Open the Zoom-Focus ring cover.
 See “Zoom-Focus ring...

ENGLISH - 25
Basic Operation
Remote control operation
You can operate the projector with the remote control 
within the remote range 15 m (492), approximately 
± 30° vertically and horizontally.
QFacing to the projector
Make sure the remote control emitter is facing to 
the remote control signal receptor of the projector 
when pressing the buttons to operate.
QFacing to the screen
Make sure the remote control emitter is facing to 
the screen when pressing the buttons to operate 
the projector. The signal...

Basic Operation
Remote control operation
ENGLISH - 26
You can switch the input method manually by 
pressing the COMPUTER, WIRELESS and 
VIDEO buttons. Press the required button 
several times or I H to cycle through the 
input methods as follows.
 You can confirm the selected input method in 
displayed graphical input guide on the upper right 
of the screen. Highlighted in yellow is selected terminal. 
See “INPUT GUIDE” on page 37.
QPressing the COMPUTER buttonQPressing the WIRELESS button
 See CD-ROM...

Basic Operation
Remote control operation
ENGLISH - 27
You can project an image split in 2 windows 
as an INDEX-WINDOW. One is frozen and 
stored in memory, and displayed on the 
screen’s left side while displaying subsequent image 
continues on the right.
Press the MENU or RETURN button to escape.
QSwitching the position
In default, the frozen image is displayed on the left 
and the subsequent image is displayed on the 
right. Press IH to switch the position.
QChanging the image size
Press F G to capture...

Basic Operation
Remote control operation
ENGLISH - 28
You can enlarge the projected image down 
to a centred area for emphasizing within the 
range of 1x to 2x.
QEnlarging the image
1. Press any side of the DIGITAL ZOOM +/- button 
once.
 The centred area of the image will then be enlarged 
2. Adjust the image size by pressing the 
DIGITAL ZOOM +/- button.
 Changes the size of the image in steps of 0.1.
QShifting the centre point
Press F G I H to shift the centre point.
Enlarging the centred area
Press...

ENGLISH - 29
Settings
Menu Navigation
The menu system allows you to access functions which do not have their own dedicated buttons on the remote 
control. The menu options are structured and categorised. You can navigate through the menu with FGHI 
buttons.
JDisplaying the main menu
Press the MENU button to display the main menu 
and the operating guidance.
JAdjusting with the bar scale 
items
The triangle mark under the bar indicates factory 
default setting and the square indicates the current...

Settings
Menu Navigation
ENGLISH - 30
The main menu has 6 options. Select the required menu item and press ENTER to display the sub-menu. Underlined 
items are factory default settings.
 PICTURE
 POSITION LANGUAGE
Main menu and Sub-menu
NOTE:
• Some default settings vary by the selected input signal.
• sub-menu items vary according to the selected input signal.
• Some settings are adjustable without any signals.
PICTURE MODEpage 32
NATURAL STANDARD
DYNAMIC BLACKBOARD
CONTRASTpage 32
(Default: 0)...