Panasonic Projector Pt L735ntu Operating Instructions

ENGLISH-41
Adjustments and settings
Picture
conditionOperation
Press the F F
button.
Press the G G
button.
Press the I I
button.
Press the H H
button.
DOT CLOCK
(RGB only)
Periodic striped pattern interference
(noise) may occur when a striped
pattern such as the one below is
projected. If this happens, use the
Iand Hbuttons to adjust so that
any such noise is minimised.
CLOCK PHASE
(RGB only)
Adjust the DOT CLOCK setting first
before carrying out this adjustment.
Use the Iand Hbuttons to adjust so
that...

42-ENGLISH
possible.
BThe picture size will also change when
correction of keystone distortion is
carried out.
BThe range of keystone correction varies
depending on the type of signal being
input (including when no signal is being
input). If you make an adjustment that is
outside the allowable range, the setting
will not be changed. In addition, if the
input signal changes after keystone
correction has been carried out, the
correction setting may be cancelled.
This indicates that the current correction...

ENGLISH-43
Adjustments and settings
RESIZING
This should normally be set to “ON”.
(This setting is only for signals
which have lower resolutions than
the LCD panels. Refer to page 62
for details.)
ON
The pixel resolution of the input
signal is converted to the same
resolution as the LCD panels before
being projected. For signals with
lower resolutions, gaps in the pixels
are automatically interpolated into
the picture before it is projected.
This may sometimes cause
problems with the quality of the...

44-ENGLISH
Audio adjustment
Select the items by pressing the F
or Gbuttons on the remote control
unit or the projector.VOLUME
Press the Ior Hbuttons to adjust
the volume of the sound output by
the projector’s built-in speaker. 
MUTE
Set the MUTE to “ON” pressing the
Ior Hbuttons to turn off the
volume of the sound output.
To release muting, set to “OFF”
pressing the Ior Hbuttons.
AUDIO MODE
Set to “VOICE” by using the Iand
Hbuttons when the sound output is
mainly conversations. The sound
will become...

ENGLISH-45
Adjustments and settings
Use the Fand Gbuttons on the
projector or remote control unit to
select an item, then press the Ior
Hbuttons to change the setting.
OSD
ON
The current input name is displayed
in the top-right corner of the screen
when the input signal is changed.
OFF
Use this setting when you do not
want the current input name to be
displayed.
AUTO SEARCH
ON
The input signal will be detected and
selected automatically when the Input
select (RGB, VIDEO) buttons are
pressed for a few...

46-ENGLISH
RGB/YPBPR
This setting is valid when 750p,
HDTV60, HDTV50, 525p, 625i and
525i signals are being input. Select
the setting in accordance with the
input signal.
The RGB/YP
BPRitem is displayed
when the RGB1 IN or RGB2 IN
connector has a signal being input.
VGA60/525P
When a VGA60 or 525p RGB signal
is being input, select the signal in
accordance with the input signal.
BLACKBOARD
Set to “ON” when PICTURE MODE
is set to BLACKBOARD. (Refer to
page 37.)
BACK COLOR
This sets the color which is...

ENGLISH-47
Adjustments and settings
CONTROL KEY
To disable the buttons on the
projector, set CONTROL KEY to
“OFF”. A confirmation screen will
then be displayed. Select “OK” by
using Iand Hbuttons. To use the
buttons on the projector, set to “ON”
by using the remote control unit.
AUTO POWER OFF
If any signal is not input into the
projector during the time that you set
up, the projector will return to standby
mode. The auto power off time can
be set to, from 15 minutes to 60
minutes, by 5 minutes. If you...

48-ENGLISH
Network setup (PT-L735NTU only)
You need make adjustment on some items when controlling the projector
with a personal computer by means of the wireless network. Refer to the
accessory CD-ROM for details.
OFF
OFF
OFF
VIEWERON
ON
ON
WEB
NETWORK
NETWORK
EASY CONNECT
HOSTNAME
WEB CONTROL
WEB STANDBY
WEB PASSWORD
SD MODELAN1
SELECT:[^][@]
Ð
T¦á§¦à§ENTER:[ENTER]
ESC:[MENU] PANASONIC L735NT
SD CARDAUTOPLAY
REPEAT
INTERVALOFFON
1
5 sec
SELECT:[^][@]
ADJUST:[{][}]ENTER:[ENTER]
ESC:[MENU]
WEB...

ENGLISH-49
Adjustments and settings
Setting up the SECURITY function
This projector is equipped with a security function. A password input screen
can be displayed, or a company URL can be set up and displayed at the
bottom of the projected image. A logo also can be displayed before projection.
Use the Iand Hbuttons on the
projector or remote control unit to
select SECURITY, then press the G
button.
(When you use the SECURITY
function for the first time)
Press the F, H, G, I, F, H, G
and Ibuttons in...

50-ENGLISH
CHANGE TEXT
The setup letters which will be
displayed when TEXT DISPLAY is
set to “ON” can be changed.
Press the ENTER button to display
the CHANGE TEXT screen.
#Use the F, G, Iand Hbuttons
to select the characters, then
press the ENTER button. 
(You can enter 20 characters
continuously.)

←
Moves cursor to left.
→
Moves cursor to right.
DELETE
Deletes a letter on the cursor.
ALL DELETE
Deletes all the letters.
$Use the F, G, Iand Hbuttons
to select “OK”, then press the
ENTER button.
CSelect...