Panasonic Projector PT-EX510 Specifications

Display modeDisplay
resolution
(dots)*
1
Scanning frequency
H
(kHz) V
(kHz)Dot clock
frequency
(MHz) Format
1280 × 720
1280 × 768
1280 × 768
1280 × 768
1280 × 800
1280 × 800
1280 × 800
1280 × 960
1280 × 1024
1366 × 768
1400 × 1050
1440 × 900
1600 × 1200
1680 × 1050
1920 × 1080
1920 × 1080*
3
1920 × 1080*3
1920 × 1080*2
1920 × 1200
1920 × 1200*2
37.1
44.8
76.3
92.6
39.6
47.8 47.4
60.3
68.6
41.3
49.7 49.3
62.8
71.6
60.0
52.4
64.0
72.3
78.2
80.0
91.1
47.7 39.6
54.1
64.0
65.2
65.3
78.8
82.2
46.3 55.9
75.0...

Serial connector
T he  serial  connector  complies with RS-232C.  To contr ol the  projector  from  a personal  computer, com-
mands  must be input  through  communication  softwar e, based  on the  format  and satisfying  the commu -
nication  conditions  shown below.
Basic  format
T ransmission  from  the  computer  begins with STX,  then  the ID, command,  parameter, and  ETX  are  sent
in  this  order . Add  parameters  according to the  details  of contr ol.
C
ommunication  conditions  (factory...

Contr ol commands
Command: ParameterF unction Callback
Cable  specifications
*Do  not  send  PON,  POF or OSH  commands  continuously  in a short  period  of time.  Doing  so may  burst  the  lamp  or shorten  the  lamp  re placement
cycle.
*W hen a command  that cannot  be executed  during standby  mode is sent,  the projector  will send  an ER401  command  in reply .
PON
POF
OSH:0
OSH:1
IIS:HD1
IIS:DVI
IIS:RG1
IIS:RG2
IIS:VID
VXX:RYC2=+00000
VXX:RYC2=+00001
VXX:RYC2=+00002
VXX:LPWI1=+00030...

Status request  commands
Comman d:Parameter FunctionDescription
Callback
C ommand  example
To  set  the  shutter  function  on,  send  the command  as shown  below.
ADZZ OSH:1
;E TXSTX
NOTE:  When  sending  commands  without  parameters,  a colon  (:) is not  necessary .
*
1 
p1p2p3p4  = Celsius  (°C), p5p6p7p8  = Fahr enheit  (°F)
NOTE:  If a wr ong  command  is received,  the projector  will send  an ER401  or ER402  command  to the  computer .
QPW
QSH
QIN
QVX:LPWI1
QSE
QPM
QST
Q$L:1
QTM:0
QTM:1 Main...

Notes  on projector  placement  and  operation 
T he  projector  uses a high-wattage  lamp that becomes  very  hot  during  operation.  Please observe  the
following  precautions .
1. Never  place objects  on top  of the  projecto r.
2. Make  sure ther e is  an  unobstructed  space  of 1,000  mm (3 feet  3 inches)  or mo re ar ound  the pro-
jector’ s exhaust  openings.
3. Do not  stack  projector  units directly  on top  of one  another  for the  purpose  of multiple  (stacked)
pr ojection.  When...

Operating the projector  continuously
1.  If the  projector  is to  be  operated  continuously  12 hours  or mor e, lamp  replacement  cycle duration
becomes  shorter.
2.  The lamp  replacement  cycle duration  becomes  shorter if the  projector  is operated  repeatedly  for short
periods.
Di
rection  of air  intake  and  exhaust
Intake
Exhaust
We ights  and  dimensions  shown are  appr oximate.  Specifications  and  appearance  are  subject  to change  without  notice.
Pr oduct  availability  differs...