Panasonic Projector PT-DZ16K Specifications

							PT-D Z16K
3-Chip  DLP™Pr ojecto rProduct  Name  : 
SPECFILE
Product  Number  :   
1/14As of April 2014. Specifications and appearance are subject to change without notice.
SFD14M020   
						

							Specifications
Main unit
Power  supply
Power  consumptio n
DLP ™c hipP anel size
Display  method
P ixels
Lens
L amp
Scr een  size
B rightness*
2
Center- to-cor ner uniformity *2
Contrast*2
Resolution
S canning  frequency SDI
HDMI/DVI-D/RGB
YP
BPR(YCBCR)
V ideo/S- Video 20
0– 240  V  AC,  12  A,  50/60  Hz  (3-wire  single-phase)
2,150  W  (2,200 VA) (0.3 Wwith
STANDB YMODEset toECO.*19Ww ith
ST ANDB YMODEset  toNORMAL.), 
m ax. 7,338  BTU  (without  light  output:7 ,127  BTU  )
24.1  mm  (0.95  inches)  diagonal  (16:9 aspect ratio) 
DLP™ chip ×3 (R,  G,  B),  DLP™p rojection  syste m
2,073,600  (1,920  ×1,080)  ×3, total  of  6,220,800  pixels
O ptional  powered  zoom/focus  lenses
420  W  UHM  lamps  (× 4) (four  lamp  system)
1.78 –25.4  m  (70– 1,000  inches)  (1.7 8–15.24  m  (70– 600  inches)  with
the ET- D75LE8 tele),  (1.78-7.62 m(70 - 300 inches) with the  ET-D75LE5, 
16:9 aspect ratio 
16,000  lumens  (four lamp)
90%
10,000:1  (full  on/full  off,  in  dynamic  iris  3 mode )
1,920  ×1,080  pixels  (Input  signals  that  exceed  this  resolution  will be
converted  to  1,920 ×1,080  pixels.)
3 G-SDI  signal  (Y P
BPR4:2:2 10-bit):
SMPTE  ST  424  compliant:  1080/50p,  1080/60p,
                          (RGB4:4:4 12bit/10bit):
              SMPTE ST 424 compliant: 1080/50i, 1080/60i, 1080/25p, 1080\
/24p
                                                                1080/24s\
F, 1080/30p Single-link HD-SDI signal (YP
BPR 4:2:2 10-bit) :
SMPTE  ST  292  compliant:  720/50p,  720/60p,  1035/60i,  1080/50i ,
1080/60i,  1080/25p,  1080/24p,  1080/24sF, 1080/30p
SD-SDI  signal  (Y C
BCR4:2:2 10-bit):
SMPTE  ST  259  compliant:  480i,  576i
480p,  576p,  720/60p,  720/50p,  1080/60i,  1080/50i,  1080/25p,                          
1080/24p, 1080/24sF ,1080/30p,  1080/60p,  1080/50p,
V GA  (640  × 480)– WUXGA  (1,920  ×  1,200), compatible  with 
non-interlaced  signals only, dot  clock:  25 –162 MHz
Horizontal:  15–100  kHz,  vertical:  24–120  Hz, 
d ot  clock:  162MHz or less>& HDMI/DVI-D : 25 MHz– 162MHz)
480i  (525i):  f
H15.73  kHz; fV59.94 Hz, 
576i  (625i):  f
H15.63  kHz; fV50 Hz, 
480p  (525p):  f
H31.47  kHz;  fV59.94 Hz, 
576p  (625p):  f
H31.25  kHz;  fV50  Hz, 
720  (750)/60p:  f
H45.00  kHz; fV60  Hz, 
720  (750)/50p:  f
H37.50  kHz; fV50 Hz, 
1035/60i:  f
H33.75  kHz; fV60 Hz, 
1080  (1125)/60i:  f
H33.75  kHz;  fV60 Hz, 
1080  (1125)/50i:  f
H28.13  kHz;  fV50 Hz, 
1080/25p:  f
H28.13  kHz; fV25 Hz, 
1080/24p:  f
H27.00  kHz; fV24 Hz, 
1080/24sF:  f
H27.00  kHz; fV48 Hz, 
1080/30p:  f
H33.75  kHz; fV30 Hz, 
1080/60p:  f
H67.50  kHz; fV60 Hz, 
1080/50p:  f
H56.25  kHz; fV50 Hz
f
H:  15.73  kHz,  fV:  59.94 Hz  [NTSC/NTSC4.43/ PAL-M/PA L60]
f
H:  15.63  kHz,  fV:  50 Hz  [P AL/PAL-N/SECAM ]
As of April 2014 2/14
PT-DZ16K3-Chip DLP
						

							Optical  axis  shift Vertical
Horizontal
Keystone  cor rection  range
Keystone  cor rection  range when  using 
both the Keystone and Curved correction 
of the Geometric Adjustment function
Installatio n
Te rminals SDI IN 
HDMI IN
DVI-D  IN
RGB  1  IN
R,  G,  B
Y,   P
B, PR(Y,  CB, CR)
S-V ideo  signal
RGB  2  IN
R,  G,  B
Y,   P
B, PR(Y,  CB, CR)
V IDEO  IN ±60%  (±50%  with 
the ET-D75LE6)  from  center  of  screen,  powe red
±20%  (±15%  with  the ET-D75LE6)  from  center  of  screen,  powe red
NOTE:  Optical  axis  shift  function  cannot  be  operated  when used with  the 
ET-D75LE50 .
Vertical  ±40°,  horizontal  ±15°  
(vertical ±40° and horizontal ±15°with the ET-DLE1/2/10/20,\
 
vertical  ±22° and horizontal ± 15° with the ET-D75LE5/50,  
vertical  ±28° and horizontal ±15° with the ET- D75LE6)
Ve rtical  ±20°,  horizontal  ±15°  
(vertical  ±8°  and  horizontal  ±8°  with  the ET-D75LE5/50, 
vertical  ±10°  and  horizontal  ±10° with  the  ET-D75LE6 
Ceiling/floor , front/re ar
B NC  ×1, 
3G-SDI  signal: SMPTE  ST 424  compliant 
HD-SDI  signal: SMPTE  ST  292  complian t
SD-SDI  signal: SMPTE  ST  259  complian t
HDMI  19-pin  ×1, Deep  Colo r, c ompatible  with HDCP , 
480i, 576i, 480p,  576p,  720/60p,  720/50p,  1080/60i,  1080/50i, 
1080/24p, 1080/24sF,  1080/25p,  1080/30p,  1080/60p,  1080/50p  
V GA  (640  ×480)–WUXGA*
3(1,920  ×1,200), 
dot  clock:  25–162  MH z
NOTE:  Compatible  with  non-interlaced  signals  only.
DVI-D  24-pin  ×1, D VI  1.0  compliant,  HDCP  compatible, 
for  single  link only
480p,  576p,  720/60p,  720/50p,  1080/60i,  1080/50i,  1080/24p ,
1080/24sF,  1080/25p,  1080/30p,  1080/60p,  1080/50p,  
V GA  (640  ×480)–WUXGA*
3(1,920  ×1,200), 
dot  clock:  25–162  MH z
NOTE:  Compatible  with  non-interlaced  signals  only.
BNC  ×5
R:  0.7  Vp-p, 75 ohms, 
G:  0.7  Vp-p  (G:  1.0 Vp-p  for  sync on  G),  75 ohms ,
B:  0.7  Vp-p,  75  ohms
HD,  VD/SYNC:  TTL,  high  impedance,  positive/negative  automati c
NOTE:  SYNC/HD and  VD terminals  do  not  accept tri-level  sync  signals.
Y:  1.0  Vp-p  (including  sync signal),  PB/PR(CB/CR): 0.7  Vp-p,  75 ohms
Y:  1.0  Vp-p,  C:  0.286 Vp-p, 75  ohms
D-sub  HD  15-pin  (female)  ×1
R:  0.7  Vp-p,  75  ohms, 
G:  0.7  Vp-p  (G:  1.0 Vp-p  for  sync on  G),  75 ohms ,
B:  0.7  Vp-p, 75 ohms
HD,  VD/SYNC:  TTL,  high  impedance,  positive/negative  automati c
NOTE:  SYNC/HD and  VD terminals  do  not  accept tri-level  sync  signals.
Y:  1.0  Vp-p  (including  sync signal),  PB/PR(CB/CR): 0.7  Vp-p,  75 ohms
B NC  ×1,  1.0  Vp-p,  75 ohms
SERIAL  IN
SERIAL  OU T
REMOTE  1  IN
REMOTE  1  OU TD-sub 
9-pin  (female)  ×1 for  extern al control  (RS-232C  compliant)
D-sub  9-pin  (male)  ×1 for  link  control
M3  jack  ×1 for  wired  remote  control
M3  jack  ×1 for  link  control
REMOTE  2  IN
LAN D-sub 
9-pin  (female)  ×1 for  extern al control  (parallel )
RJ-45  ×1 for  network  connection,  100Base-TX/10Base-T,  compliant
w ith  PJLink™  (class 1)
As of April 2014 3/14
PT-DZ16K3-Chip DLP
						

							Power cord lengt h
Cabinet  materials
Dimensions  (W ×H  ×D ):
We ight*
6
Operation  noise*2
O perating  temperatu re
O perating  humidit y
Remote  contr ol uni t
P ower  suppl y
O peration  range*
8
Dimensions  (W  ×  H  ×  D)
We ight
Supplied  accessories
Optional  accessories
Z oom  lens (0.9–1.1:1 )
Z oom  lens (1.3–1.7:1 )
Z oom  lens (1.7–2.4:1 )
Zoom  lens  (2.4 –4.7:1 )
Zoom  lens  (4.6 –7.4:1)
Zoom  lens  (7.3 –13.8:1)
Fixed-focus  lens  (0.7:1)
Lens  motor  cover
Ceiling  mount bracket
Fram e
Smoke  cut  filter
R eplacement  lamp  unit
R eplacement  filter  unit 3.0  m 
(9
10 in)
Molded  plasti c
620× 291*
4× 800 *5mm
(24-7/1 6×11-15/3 2*4×31-1/2 *5inches)  (without  lens)
A pprox.  43  kg (94.8  lbs) (without  lens)
48  dB  (quad  lamp  operation )
0°–4 5°C  (32°–113° F)*
7
10%– 80%  (no condensation )
3  V  DC  (AA/R6 type  battery  ×2)
A pprox.  30  m (98
5  in)  when  operated  from  directly  in  front  of  th e
s ignal  receptor
51  ×1 76 ×2 8  mm  (2 ×6-15/16  ×1-3/32  inches)
Approx.  134 g  (4.7  oz)  (including  batteries)
Power  cord with  security  lock  (× 1)
Wireless/wi red  remote  control  unit  (× 1)
B atteries  for  remote  control  (AA/R6 type ×2)
S oftware  CD-ROM  (Logo Transfer  Software,  Multi  Projector  Monitorin g
&  Control  Software)  (×  1)
ET-D75LE 6
ET-D75LE10
ET-D75LE20
ET-D75LE30
ET-D75LE40
ET-D75LE 8
ET-D75LE50
ET -D75MC1
ET-PKD510H  (for high  ceilings )
ET-PKD510S  (for low  ceilings )
ET-PFD510
ET-SFR510
ET-LAD510  (one  bulb)
ET-LAD510F  (a set  of four  bulbs)
ET -EMF510
  We ights  and dimensions  shown  are approximate.  Specifications  and  appearance  are  subject  to change  without  notice.
* 1W
hen the standby  mode  is  set  to  eco,  network  functions  such  as power  on over  the  LAN  network  will  not  operate,  and  the  serial  output  termi-
nal  cannot  be used.  Also,  only  certain  commands  can be received  for exter nal  contr ol using  the  serial  terminal.
* 2M
easurement,  measuring  conditions,  and method  of  notation  all comply  with ISO  21118  international  standard s.
* 3W
UXGA  resolution  is  supported  only  when  the  signals are compliant  with VESA  CVT-RB  (Coor dinated  Video  Timing-Reduced  Blanking).
* 4
With  legs  at shortest  position.
* 5
Excluding  the optional  lens .
* 6A
verage  value  (excluding  the optional  lens).  May  dif fer  depending  on models.
* 7
The  operating  temperature  range is  0  °C  to  40  °C  (32  °F  to  104  °F)  when  the 
FA NC ONTROLis set  to HIGH ALTITUDE MODE(for  altitudes  fr om 1,400  m
to  2,700  m  (4,593  ft  to  8,858  ft)  above  sea  level).  When the projector  is used  with  the  ET-SFR510  Smoke  Cut Filter , the  operating  temperature
range  is  0  °C  to  35  °C  (32  °F  to  95  °F),  and  the  pr
ojector  cannot  be  used in places  at  high  altitude. 
* 8
Operation  range differs  depending  on environments.
As of April 2014 4/14
PT-DZ16K3-Chip DLP
						

							730 (2 8- 3/4)
80
0 (3 1- 1/2)
70
(2 -3 /4)
620  (24- 13 /32)
24
4
(9 -19/ 32 ) 60
8
(2 3- 15 /16)
47
(1 -2 7/32 )
24
4
(9 -19/ 32 )
177
(6 -3 1/32 )
29
1 (1 1-15 /32)
36
(1 -1 3/ 32 )
Dimension s
T erminals
1 Remote  1  input
2 Remote  1  output
3 Remote  2  input
4 Serial  input
5 Serial  output
6 SDI input
7 HDMI input
8
9 RGB 
1  input
10 RGB 
2 Input
11 DVI-D  input
12 Vi
deo  input
LAN  connector
unit  : mm  (inch)
NOTE:  This illustration  is  not  drawn  to  scale.
1
67 8910 11 12
23
45
As of April 2014 5/14
PT-DZ16K3-Chip DLP
						

							Standard setting-up  position
U pper edge of projected image
432
(18)

60.5
(2-3/8)
298
(11-23/32)
*
1
*2
Lower edge of projected image
Pr
ojected image L
L
L
419
–539
(16-1/2 –
21-7/32)
*2
560 –680
(22-1/16 –
26-25/32)
157
(6-3/16)
314
(12-3/8)
157
(6-3/16)
87.5
(3-7/16)
175
(6-7/8)
87.5
(3-7/16)
Pr
ojected image
H
H
unit  : mm  (inch)
*1 When  the 
lens  protrudes  to the 
maximum.
212  mm  (8-11/32)  with  the  ET -D75LE6
125  mm  (4-29/32)  with  the  ET -D75LE1 0
121  mm  (4-3/4)  with  the  ET-D75LE20
121  mm  (4-3/4)  with  the  ET-D75LE30
124  mm  (4-7/8)  with  the  ET-D75LE40
254  mm  (10)  with  the ET-D75LE8
203  mm  (8) with  the  ET-D75LE5 0
*2  Adjustable  in  40 mm  (1-9/16)  steps .
Caution :
• All  construction  work  should  be  done  by  a  qualified  technician.
•W hen  mounting  to  the  ceiling,  use  the  special  mounting  bracket.  To prevent  the  projector  from  swaying  or  drop-
ping,  attach  the  wi re that  is  included  with  the  projector  between  the  mounting  bracket  and  the  ceiling.
NOTE: 
I llustrations  show the  pr ojector  installed
u sing  optional  ceiling  mount  bracket 
ET-PKD510H  and an optional  lens .
This  illustration  is  not  drawn to scale .
As of April 2014 6/14
PT-DZ16K3-Chip DLP™ Projector 
SFD14M020  
						

							Screen size
(diagonal)Zoom
Zoom lenses
Fixed-focus
Fixed-focus lens
Distance to screen (L)
Height from the edge of screen 
to center of lens (H)
ET-D75LE1 Zoom lens
min. max. min. max. min. max. min. max. ET-D75LE2
Zoom lens ET-D75LE3
Zoom lens ET-D75LE4
Zoom lens ET-D75LE5
Fixed-focus lens
[m] /[in]
1.78/
2.03/
2.29/
2.54/
3.05/
3.81/
5.08/
6.35/
7.62/
8.89/
10.16/
12.70/
15.24/
25.40/ 70
80
90
100
120
150
200
250
300
350
400
500
600
1000 0.44
0.50
0.56
0.62
0.75
0.93
1.25
1.56
1.87
2.49
3.11
3.74
4.36
4.98
Pr
ojection  distance  for  16:9aspect  ratio  sc reen
(ET-D75LE1/D75LE2/D75LE3/D75LE4/D75LE5)
Unit:  feet
Unit:  meters
•T
he  value  for L (distance  to  screen)  varies  slightly  within  ±5% depending  on  the  zoom  lens  characteristics.
• At  the  shortest  projection  distance,  the zoom  lens  characteristics  may cause  slight image  distortion.
•W hen  vertical  keystone  correction  is  used,  the  image  is corrected  in  the  direction  that  reduces  its  projected  size.
N OTE:  When  the ET-D75LE5  is  mounted,  the optical  lens  shift  function  cannot  be  used. 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
-0.09
-0.10
-0.11
-0.12
-0.15
-0.19
-0.25
-0.31
-0.37
-0.44
-0.50
-0.62
-0.75
-1.25 0.96
1.10
1.23
1.37
1.64
2.05
2.74
3.42
4.11
4.79
5.48
6.85
8.22
13.70
1.03
1.19
1.35
1.51
1.82
2.30
3.10
3.89
4.69
–   
–   
–   
–   
–   
2.79
3.20
3.61
4.02
4.85
6.09
8.15
10.21
12.27
14.33
16.40
20.52
24.64
41.14 4.24
4.86
5.48
6.11
7.35
9.21
12.32
15.42
18.53
21.63
24.74
30.95
37.16
62.01 7.14
8.18
9.21
10.25
12.33
15.44
20.63
25.81
31.00
36.19
41.37
51.75
62.12
103.62 11.45
13.10
14.74
16.39
19.69
24.64
32.89
41.14
49.39
57.63
65.88
82.38
98.87
164.86
2.08
2.39
2.70
3.01
3.63
4.55
6.10
7.64
9.18
10.73
12.27
15.36
18.44
30.79 2.82
3.23
3.65
4.06
4.89
6.13
8.20
10.27
12.34
14.41
16.48
20.63
24.77
41.33 4.25
4.87
5.49
6.12
7.36
9.22
12.33
15.43
18.54
21.64
24.75
30.96
37.17
62.02 7.15
8.18
9.22
10.26
12.33
15.44
20.63
25.82
31.01
36.19
41.38
51.75
62.13
103.62
Screen size
(diagonal) Zoom
Zoom lenses
Fixed-focus
Fixed-focus lens
Distance to screen (L)
Height from the edge of screen 
to center of lens (H)
ET-D75LE1 Zoom lens
min. max. min. max. min. max. min. max. ET-D75LE2
Zoom lens ET-D75LE3
Zoom lens ET-D75LE4
Zoom lens ET-D75LE5
Fixed-focus lens
[m] /[in]
1.78/
2.03/
2.29/
2.54/
3.05/
3.81/
5.08/
6.35/
7.62/
8.89/
10.16/
12.70/
15.24/
25.40/ 70
80
90
100
120
150
200
250
300
350
400
500
600
1000 3.4
3.9
4.4
4.9
6.0
7.5
10.2
12.8
15.4 –   
–   
–   
–   
–   
9.1
10.5
11.8
13.2
15.9
20.0
26.7
33.5
40.3
47.0
53.8
67.3
80.9
135.0 13.9
16.0
18.0
20.0
24.1
30.2
40.4
50.6
60.8
71.0
81.2
101.5
121.9
203.4 23.4
26.8
30.2
33.6
40.4
50.7
67.7
84.7
101.7
118.7
135.7
169.8
203.8
339.9 37.6
43.0
48.4
53.8
64.6
80.8
107.9
135.0
162.0
189.1
216.1
270.3
324.4
540.9
6.8
7.9
8.9
9.9
11.9
14.9
20.0
25.1
30.1
35.2
40.3
50.4
60.5
101.0 9.2
10.6
12.0
13.3
16.0
20.1
26.9
33.7
40.5
47.3
54.1
67.7
81.3
135.6 14.0
16.0
18.0
20.1
24.1
30.3
40.4
50.6
60.8
71.0
81.2
101.6
122.0
203.5 23.4
26.8
30.3
33.7
40.5
50.7
67.7
84.7
101.7
118.7
135.8
169.8
203.8
340.0 1.4
1.6
1.8
2.0
2.5
3.1
4.1
5.1
6.1
8.2
10.2
12.3
14.3
16.3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
-
0.3
- 0.3
- 0.4
- 0.4
- 0.5
- 0.6
- 0.8
- 1.0
- 1.2
- 1.4
- 1.6
- 2.0
- 2.5
- 4.1 3.1
3.6
4.0
4.5
5.4
6.7
9.0
11.2
13.5
15.7
18.0
22.5
27.0
44.9
As of April 2014 7/14
PT-DZ16K3-Chip DLP™ Projector 
SFD14M020  
						

							Screen size
(diagonal)Zoom
Zoom lenses
Fixed-focus
Fixed-f ocus
l ens
Distance to screen (L)
Height from the edge of screen 
to center of lens (H )
ET-D75LE10 Zoom lens
min. max. min. max. min. max. min. max.m in. max.min. max.
ET-D75LE6
Zoom lens ET-D75LE20
Zoom lens ET-D75LE30
Zoom lens ET-D75LE40
Zoom lens ET-D75LE8
Zoom lens ET-D75LE50
Fixed-focus lens Except
ET-D75LE6 ET-D75LE6
[m] /[in]
1.78/
2.03/
2.29/
2.54/
3.05/
3.81/
5.08/
6.35/
7.62/
8.89/
1 0.16/
1 2.70/
1 5.24/
2 5.40/ 70
80
90
100
120
150
200
250
300
350
400
500
600
1000
1.78/
2.03/
2.29/
2.54/
3.05/
3.81/
5.08/
6.35/
7.62/
8.89/
1 0.16/
1 2.70/
1 5.24/
2 5.40/ 70
80
90
100
120
150
200
250
300
350
400
500
600
1000 0.44
0.50
0.56
0.62
0.75
0.93
1.25
1.56
1.87
2.49
3.11
3.74
4.36
4.98
Screen size
(diagonal)
Zoom
Zoom lenses
Fixed-focus
Fixed-f ocus
l ens
Distance to screen (L)
Height from the edge of screen 
to center of lens (H )
ET-D75LE10 Zoom lens
min. max. min. max. min. max. min. max.m in. max.min. max.
ET-D75LE6
Zoom lens ET-D75LE20
Zoom lens ET-D75LE30
Zoom lens ET-D75LE40
Zoom lens ET-D75LE8
Zoom lens ET-D75LE50
Fixed-focus
lens Except
ET-D75LE6 ET-D75LE6
[m] /[in]
1.4
1.6
1.8
2.0
2.5
3.1
4.1
5.1
6.1
8.2
10.2
12.3
14.3
16.3
Pr ojection  distance  for  16:9aspect  ratio  sc reen
(ET -D75LE6/D75LE10/D75LE20/D75LE30/D75LE40/D75LE8/D75LE50)
Unit:  feet
Unit:  meters
•T
he  value  for L (distance  to  screen)  varies  slightly  within  ±5% depending  on  the  zoom  lens  characteristics.
• At  the  shortest  projection  distance,  the zoom  lens  characteristics  may cause  slight image  distortion.
•W hen vertical  keystone  correction  is  used,  the  image is corrected  in  the  direction  that  reduces  its  projected  size.
N OTE:  When  the ET-D75LE50  is  mounted,  the optical  lens  shift  function  cannot  be  used. 
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00 0.87
1.00
1.12
1.25
1.49
1.87
2.49
3.11
3.74
4.36
4.98
6.23
7.47
12.45
–
–
–
–
–
–
–
–
–
–
–
–
–
–
-0.09
-0.10
-0.11
-0.12
-0.15
-0.19
-0.25
-0.31
-0.37
-0.44
-0.50
-0.62
-0.75
-1.25 0.96
1.10
1.23
1.37
1.64
2.05
2.74
3.42
4.11
4.79
5.48
6.85
8.22
13.70
1.04
1.20
1.36
1.51
1.83
2.31
3.10
3.89
4.68
5.48
6.27
7.85
9.44
15.78
1.67
1.92
2.17
2.42
2.92
3.67
4.92
6.17
7.41
8.66
9.91
12.40
14.90
24.88 2.53
2.91
3.29
3.67
4.42
5.55
7.44
9.33
11.21
13.10
14.99
18.76
22.54
37.63 3.68
4.23
4.77
5.31
6.40
8.03
10.74
13.46
16.17
18.88
21.60
27.03
32.46
54.17 7.14
8.19
9.23
10.28
12.37
15.50
20.73
25.96
31.18
36.41
41.64
52.09
62.54
104.36 11.36
13.00
14.65
16.29
19.58
24.52
32.75
40.97
49.20
57.43
65.65
82.11
98.56
164.38 21.28
24.37
27.46
30.55
36.73
46.00
61.46
76.91
92.37
107.82
123.28
154.19
185.10 –
1.40
1.61
1.82
2.03
2.44
3.07
4.11
5.15
6.19
7.23
8.28
10.36
12.44
20.77 1.96
2.25
2.54
2.83
3.42
4.29
5.75
7.21
8.67
10.13
11.59
14.51
17.44
29.12 2.53
2.91
3.28
3.65
4.40
5.52
7.39
9.26
11.13
12.99
14.86
18.60
22.33
37.28 3.66
4.20
4.74
5.28
6.35
7.97
10.67
13.36
16.06
18.75
21.45
26.84
32.23
53.79 7.07
8.10
9.13
10.16
12.23
15.32
20.48
25.64
30.80
35.96
41.12
51.44
61.76
103.05 11.16
12.81
14.46
16.11
19.41
24.36
32.61
40.86
49.11
57.35
65.60
82.10
98.60
164.5
 9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
2.9
3.3
3.7
4.1
4.9
6.1
8.2
10.2
12.3
14.3
16.3
20.4
24.5
40.9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
-0.3
-0.3
-0.4
-0.4
-0.5
-0.6
-0.8
-1.0
-1.2
-1.4
-1.6
-2.0
-2.5
-4.1
3.1
3.6
4.0
4.5
5.4
6.7
9.0
11.2
13.5
15.7
18.0
22.5
27.0
44.9
3.4
3.9
4.4
5.0
6.0
7.6
10.2
12.8
15.4
18.0
20.6
25.8
31.0
51.8
5.5
6.3
7.1
7.9
9.6
12.0
16.1
20.2
24.3
28.4
32.5
40.7
48.9
81.6 8.3
9.6
10.8
12.0
14.5
18.2
24.4
30.6
36.8
43.0
49.2
61.6
73.9
123.5 12.1
13.9
15.6
17.4
21.0
26.3
35.2
44.1
53.1
62.0
70.9
88.7
106.5
177.7 23.4
26.9
30.3
33.7
40.6
50.9
68.0
85.2
102.3
119.5
136.6
170.9
205.2
342.4 37.3
42.7
48.1
53.5
64.2
80.4
107.4
134.4
161.4
188.4
215.4
269.4
323.4
539.3 69.8
79.9
90.1
100.2
120.5
150.9
201.6
252.3
303.1
353.8
404.5
505.9
607.3 –
4.6
5.3
6.0
6.6
8.0
10.1
13.5
16.9
20.3
23.7
27.1
34.0
40.8
68.2 6.4
7.4
8.3
9.3
11.2
14.1
18.9
23.7
28.5
33.3
38.0
47.6
57.2
95.5 8.3
9.5
10.8
12.0
14.4
18.1
24.2
30.4
36.5
42.6
48.8
61.0
73.3
122.3 12.0
13.8
15.5
17.3
20.8
26.2
35.0
43.8
52.7
61.5
70.4
88.0
105.7
176.5 23.2
26.6
30.0
33.3
40.1
50.3
67.2
84.1
101.1
118.0
134.9
168.8
202.6
338.1 36.6
42.0
47.4
52.9
63.7
79.9
107.0
134.0
161.1
188.2
215.2
269.4
323.5
540.0
As of April 2014 8/14 
PT-DZ16K3-Chip DLP™ Projector 
SFD14M020  
						

							Calculation  of  the  projection  distance
For  a  sc reen  size  differ ent  from  the  above,  use  the  equation  below  to  calculate  the  projection  distance .
Aspect  ratio  16:9
minimum L  (m)  = (diagonal  sc reen  size  in  inches)  ×  0.0309  –  0.0760
maximum  L (m)  =  (diagonal  sc reen  size  in  inches)  ×  0.0412  –  0.1004
m inimum L  (m)  = (diagonal  sc reen  size  in  inches)  ×  0.0414  –  0.0795
maximum  L (m)  =  (diagonal  sc reen  size  in  inches)  ×  0.0621  –  0.1064
m inimum L  (m)  = (diagonal  sc reen  size  in  inches)  ×  0.0621  –  0.0958
maximum  L (m)  =  (diagonal  sc reen  size  in  inches)  ×  0.1037  –  0.1216
m inimum L  (m)  =  (diagonal screen  size  in  inches)  ×  0.1037  –  0.1158
maximum  L (m)  =  (diagonal  screen  size  in  inches)  ×  0.1650  –  0.1013
Zoom  lenses
ET
-D75LE1
ET -D75LE2
ET -D75LE3
ET -D75LE4
minimum L  (m)  = (diagonal  sc reen  size  in  inches)  ×  0.0208  –  0.0566
maximum  L (m)  =  (diagonal  sc reen  size  in  inches)  ×  0.0250  –  0.0736
m inimum L  (m)  = (diagonal  sc reen  size  in  inches)  ×  0.0292  –  0.0857
maximum  L (m)  =  (diagonal  sc reen  size  in  inches)  ×  0.0377  –  0.1085
m inimum L  (m)  = (diagonal  sc reen  size  in  inches)  ×  0.0374  –  0.0832
maximum  L (m)  =  (diagonal  sc reen  size  in  inches)  ×  0.0543  –  0.1162
m inimum L  (m)  = (diagonal  sc reen  size  in  inches)  ×  0.0539  –  0.1131
maximum  L (m)  =  (diagonal  sc reen  size  in  inches)  ×  0.1045  –  0.1765
m inimum L  (m)  =  (diagonal screen  size  in  inches)  ×  0.1032  –  0.1577
maximum  L (m)  =  (diagonal  screen  size  in  inches)  ×  0.1645  –  0.1615
m inimum L  (m)  =  (diagonal screen  size  in  inches)  ×  0.1650  –  0.3862
maximum  L (m)  =  (diagonal  screen  size  in  inches)  ×  0.3091  –  0.3598
L  (m)  =  (diagonal  screen  size  in  inches)  ×  0.0159  –  0.0835
ET
-D75LE 6
ET -D75LE10
ET -D75LE20
ET -D75LE30
ET -D75LE40
ET -D75LE 8
Fixed-focus  lens
ET -D75LE5
L (m)  =  (diagonal  screen  size  in  inches)  ×  0.0159  –  0.0713
ET -D75LE50
•D istances  calculated  with  the  above  equations  will  include  slight  deviations.
As of April 2014 9/14
PT-DZ16K3-Chip DLP
						

							H(Width of
projected image)
V
( Height of
projected  image)
0.15V
0.6V
0.6V 0.15V
0
.2H
0.2H
Standard  postition  of projected imag e
360°
-15°
+15°
Shif t   range
Optical  axis   s hift  function   allows to  s hift  t h e   position   of  a   p r ojected  image  a s   s h o wn  below.
I nstal lable   a n g l e
I n stall  the  p r ojector   at  a n   a n gle  with i n   t h e   r a n ge  s h own  below.
•   Ve r t i cal  d i re c tio n
T h e   p ro jector  m a y   be  installed  at  a   v e rtical
a n gle  of 360°. •
 Hor izontal   directi o n
The  p r ojector  m a y   be  installed  at  a   h o r i z o n tal
a n gle  of  ± 15° .
•
 
When  the lens  except  the  E T-D75LE6 is mounte d
H(Width  of
projected  image )
V
(Height of
projected  image)
0.15V
0.5V
0.5V 0.15V
0.15H
0.15H
Stan dard postition  of projected imag e
• When  the  E T-D75LE6 is mounte d
NOTE:  B ecause the  E T-D75LE50 is  a   fixed   short-thr ow lens,  the lens  shif t   f unction  canno t   b e   used with  i t .
PT-DZ16K3-Chip DLP™ Projector
A s of A p r il 2 014 1 0 / 1 4
SFD14M020