Panasonic Projector PT-DX610UL User Manual
Here you can view all the pages of manual Panasonic Projector PT-DX610UL User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
ENGLISH - 81
Chapter 4 Settings — [PROJECTOR SETUP] menu
6) Press qw to switch [GROUP].
rfThe setting will change among [A] to [Z] each time you press
the button.
7) Press as to select [RESPONSE(ID GROUP)].
8) Press qw to switch [RESPONSE(ID GROUP)].
rfThe setting will change between [ON] and [OFF] each time you
press the button.
r
r [RESPONSE(ID ALL)]
[ON]
Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
r
r [GROUP]
[A] - [Z] Controls...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-80.png "Page 81
ENGLISH - 81
Chapter 4 Settings — [PROJECTOR SETUP] menu
6) Press qw to switch [GROUP].
rfThe setting will change among [A] to [Z] each time you press
the button.
7) Press as to select [RESPONSE(ID GROUP)].
8) Press qw to switch [RESPONSE(ID GROUP)].
rfThe setting will change between [ON] and [OFF] each time you
press the button.
r
r [RESPONSE(ID ALL)]
[ON]
Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
r
r [GROUP]
[A] - [Z] Controls...")
ENGLISH - 81 Chapter 4 Settings — [PROJECTOR SETUP] menu 6) Press qw to switch [GROUP]. rfThe setting will change among [A] to [Z] each time you press the button. 7) Press as to select [RESPONSE(ID GROUP)]. 8) Press qw to switch [RESPONSE(ID GROUP)]. rfThe setting will change between [ON] and [OFF] each time you press the button. r r [RESPONSE(ID ALL)] [ON] Returns the response when the ID setting is ALL. [OFF] Does not return the response when the ID setting is ALL. r r [GROUP] [A] - [Z] Controls...
Page 82
![Page 82
82 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.
[MAIN VERSION] Displays the main version of the firmware of the projector.
[SUB VERSION] Displays the sub version of the firmware of the projector.
[NETWORK VERSION] Displays the network version of the projector.
[ON COUNT] [POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] Displays the...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-81.png "Page 82
82 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.
[MAIN VERSION] Displays the main version of the firmware of the projector.
[SUB VERSION] Displays the sub version of the firmware of the projector.
[NETWORK VERSION] Displays the network version of the projector.
[ON COUNT] [POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] Displays the...")
82 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1. [LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2. [MAIN VERSION] Displays the main version of the firmware of the projector. [SUB VERSION] Displays the sub version of the firmware of the projector. [NETWORK VERSION] Displays the network version of the projector. [ON COUNT] [POWER ON TIMES] Displays the number of times the power is turned on. [LAMP1 ON] Displays the...
Page 83
![Page 83
ENGLISH - 83
Chapter 4 Settings — [PROJECTOR SETUP] menu
[SUB MEMORY] Switches the sub memory. (
x page 87)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (
x
page 59)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x
page 57)
[FREEZE] Temporarily freezes video to be a still image. (
x
page 73)
[SIDE BY SIDE]
*Switches to the two window display. ( x page 73)
* Only for PT-DW640U
[DATE AND TIME]
Set the time zone, date, and time of the built-in...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-82.png "Page 83
ENGLISH - 83
Chapter 4 Settings — [PROJECTOR SETUP] menu
[SUB MEMORY] Switches the sub memory. (
x page 87)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (
x
page 59)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x
page 57)
[FREEZE] Temporarily freezes video to be a still image. (
x
page 73)
[SIDE BY SIDE]
*Switches to the two window display. ( x page 73)
* Only for PT-DW640U
[DATE AND TIME]
Set the time zone, date, and time of the built-in...")
ENGLISH - 83 Chapter 4 Settings — [PROJECTOR SETUP] menu [SUB MEMORY] Switches the sub memory. ( x page 87) [SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. ( x page 59) [SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. ( x page 57) [FREEZE] Temporarily freezes video to be a still image. ( x page 73) [SIDE BY SIDE] *Switches to the two window display. ( x page 73) * Only for PT-DW640U [DATE AND TIME] Set the time zone, date, and time of the built-in...
Page 84
![Page 84
84 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Note
rfThe image setting registered in [USER LOGO] is not saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory\
of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the button.
rfThe [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the
button.
4) When the confirmation is displayed, select [OK]
or [CANCEL], and press the button.
Note
rfThe...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-83.png "Page 84
84 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Note
rfThe image setting registered in [USER LOGO] is not saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory\
of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the button.
rfThe [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the
button.
4) When the confirmation is displayed, select [OK]
or [CANCEL], and press the button.
Note
rfThe...")
84 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu Note rfThe image setting registered in [USER LOGO] is not saved. [LOAD ALL USER DATA] Load the various setting values saved as a backup in the built-in memory\ of the projector. 1) Press as to select [LOAD ALL USER DATA]. 2) Press the button. rfThe [SECURITY PASSWORD] screen is displayed. 3) Enter a security password and press the button. 4) When the confirmation is displayed, select [OK] or [CANCEL], and press the button. Note rfThe...
Page 85
![Page 85
ENGLISH - 85
Chapter 4 Settings — [TEST PATTERN] menu
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
rfPress
qw to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various
adjustments.
1) Press qw to switch [TEST PATTERN]....](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-84.png "Page 85
ENGLISH - 85
Chapter 4 Settings — [TEST PATTERN] menu
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
rfPress
qw to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various
adjustments.
1) Press qw to switch [TEST PATTERN]....")
ENGLISH - 85 Chapter 4 Settings — [TEST PATTERN] menu [TEST PATTERN] menu Select [TEST PATTERN] from the main menu. Refer to “Navigating through the menu” ( x page 51) for the operation of the menu screen. rfPress qw to switch. [TEST PATTERN] Displays the test pattern built-in to the projector. Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various adjustments. 1) Press qw to switch [TEST PATTERN]....
Page 86
![Page 86
86 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
[SIGNAL LIST] menu
Select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
r
r Registered signal status
rf A name can be set for each sub memory (
x page 87).
rfMemory number:
$
:KHQWKHDGGUHVVQXPEHU $$+
+ LVUHJLVWHUHG 6XEPHPRU\QXPEHU
Registering a signal to the list
After a new signal is input and the button on the remote control or the...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-85.png "Page 86
86 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
[SIGNAL LIST] menu
Select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
r
r Registered signal status
rf A name can be set for each sub memory (
x page 87).
rfMemory number:
$
:KHQWKHDGGUHVVQXPEHU $$+
+ LVUHJLVWHUHG 6XEPHPRU\QXPEHU
Registering a signal to the list
After a new signal is input and the button on the remote control or the...")
86 - ENGLISH Chapter 4 Settings — [SIGNAL LIST] menu [SIGNAL LIST] menu Select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( x page 51) for the operation of the menu screen. r r Registered signal status rf A name can be set for each sub memory ( x page 87). rfMemory number: $ :KHQWKHDGGUHVVQXPEHU $$+ + LVUHJLVWHUHG 6XEPHPRU\QXPEHU Registering a signal to the list After a new signal is input and the button on the remote control or the...
Page 87
![Page 87
ENGLISH - 87
Chapter 4 Settings — [SIGNAL LIST] menu
Note
rfA signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered data
Registered signals can be protected.
1) Press asqw
to select the signal to protect.
2) Press the button.
rfThe [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the button.
rfThe [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK].
5) Press qw to switch [LOCK].
rfThe setting will...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-86.png "Page 87
ENGLISH - 87
Chapter 4 Settings — [SIGNAL LIST] menu
Note
rfA signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered data
Registered signals can be protected.
1) Press asqw
to select the signal to protect.
2) Press the button.
rfThe [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the button.
rfThe [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK].
5) Press qw to switch [LOCK].
rfThe setting will...")
ENGLISH - 87 Chapter 4 Settings — [SIGNAL LIST] menu Note rfA signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen. Protecting the registered data Registered signals can be protected. 1) Press asqw to select the signal to protect. 2) Press the button. rfThe [REGISTERED SIGNAL STATUS] screen is displayed. 3) Press the button. rfThe [REGISTERED SIGNAL SETUP] screen is displayed. 4) Press as to select [LOCK]. 5) Press qw to switch [LOCK]. rfThe setting will...
Page 88
![Page 88
88 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
To register the current settings to the list
1) Press qw on the normal screen (when the
menu is not displayed).
rfThe sub memory registration screen is displayed if the sub
memory is not registered. Proceed to Step
3)
.
rfA
list of sub memories registered to the signal currently input is
displayed.
rf When [SUB MEMOR
Y] is selected with [PROJECTOR SETUP]
→ [FUNCTION BUTTON] on the menu, the
button can be used instead of qw.
2) Press...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-87.png "Page 88
88 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
To register the current settings to the list
1) Press qw on the normal screen (when the
menu is not displayed).
rfThe sub memory registration screen is displayed if the sub
memory is not registered. Proceed to Step
3)
.
rfA
list of sub memories registered to the signal currently input is
displayed.
rf When [SUB MEMOR
Y] is selected with [PROJECTOR SETUP]
→ [FUNCTION BUTTON] on the menu, the
button can be used instead of qw.
2) Press...")
88 - ENGLISH Chapter 4 Settings — [SIGNAL LIST] menu To register the current settings to the list 1) Press qw on the normal screen (when the menu is not displayed). rfThe sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step 3) . rfA list of sub memories registered to the signal currently input is displayed. rf When [SUB MEMOR Y] is selected with [PROJECTOR SETUP] → [FUNCTION BUTTON] on the menu, the button can be used instead of qw. 2) Press...
Page 89
![Page 89
ENGLISH - 89
Chapter 4 Settings — [SECURITY] menu
[SECURITY] menu
Select [SECURITY] from the main menu, and select the item from the sub-m\
enu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
rfWhen the projector is used for the first time
Initial password: Press
awsqawsq in order
, and press the button.
rfAfter selecting the item, press
asqw to set.
Attention
rfWhen you select the [SECURITY] from the main menu and press the button, entering a...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-88.png "Page 89
ENGLISH - 89
Chapter 4 Settings — [SECURITY] menu
[SECURITY] menu
Select [SECURITY] from the main menu, and select the item from the sub-m\
enu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
rfWhen the projector is used for the first time
Initial password: Press
awsqawsq in order
, and press the button.
rfAfter selecting the item, press
asqw to set.
Attention
rfWhen you select the [SECURITY] from the main menu and press the button, entering a...")
ENGLISH - 89 Chapter 4 Settings — [SECURITY] menu [SECURITY] menu Select [SECURITY] from the main menu, and select the item from the sub-m\ enu. Refer to “Navigating through the menu” ( x page 51) for the operation of the menu screen. rfWhen the projector is used for the first time Initial password: Press awsqawsq in order , and press the button. rfAfter selecting the item, press asqw to set. Attention rfWhen you select the [SECURITY] from the main menu and press the button, entering a...
Page 90
![Page 90
90 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
2) Press qw to switch [DISPLAY SETTING].
rfThe setting will change among [OFF], [TEXT], and[USER
LOGO] each time you press the button.
r
r [DISPLAY SETTING]
[OFF]
The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] The picture registered by the user is projected.
Note
rfTo create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[TEXT CHANGE]
Change the text displayed when the...](http://img.usermanuals.tech/thumb/58/99265/w300_projector_manual_7462_d-89.png "Page 90
90 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
2) Press qw to switch [DISPLAY SETTING].
rfThe setting will change among [OFF], [TEXT], and[USER
LOGO] each time you press the button.
r
r [DISPLAY SETTING]
[OFF]
The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] The picture registered by the user is projected.
Note
rfTo create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[TEXT CHANGE]
Change the text displayed when the...")
90 - ENGLISH Chapter 4 Settings — [SECURITY] menu 2) Press qw to switch [DISPLAY SETTING]. rfThe setting will change among [OFF], [TEXT], and[USER LOGO] each time you press the button. r r [DISPLAY SETTING] [OFF] The text display is disabled. [TEXT] The text display is enabled. [USER LOGO] The picture registered by the user is projected. Note rfTo create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required. [TEXT CHANGE] Change the text displayed when the...