Panasonic Projector Pt Dw730ul Operating Instructions

							Technical Information
ENGLISH - 101
Appendix
Two window display combination list (PT-DW730U only)
Input A
Input B RGB1
Still 
image RGB1
Movie RGB2
Still 
image RGB2
Movie VIDEO S-VIDEO DVI
Still 
image DVI
Movie
RGB1
Still image – –
3 3 3 3 3 3
RGB1
Movie – –
3– – – 3–
RGB2
Still image 3 3
– –3 3 3 3
RGB2
Movie 3
– – – – – 3–
VIDEO 3–3 – – – 3–
S-VIDEO 3–3 – – – 3–
DVI
Still image 3 3 3 3 3 3
– –
DVI
Movie 3
–3 – – – – –
3:   Two window display combination is possible
–:   Two window display combination is not possible
Signals that are treated as  “
movies ”
: 
  480i, 576i, 480p, 576p,  1080/60i, 1080/50i, 1080/60p, 
  1080/50p, 1080/24sF, 1080/30p, 1080/25p, 1080/24p, 
  720/60p, 720/50p, NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
Menu lock password
To initialize your password, consult your distributor. 
						

							Technical Information
102 - ENGLISH
Appendix
List of compatible signals
The following table specifies the types of signals compatible with the projectors.
ModeResolution
(Dots) Scanning frequency
Dot
clockfrequency (MHz) Picture 
quality
*3
Plug and play*6
Format*7Horizontal(kHz) Vertical
(Hz) RGB2DVI-D
EDID1 DVI-D
EDID2
NTSC/NTSC4.43/ PAL-M/PAL60 720 x 480i 15.7
59.9
–A– – –V/S
PAL/PAL-N/SECAM 720 x 576i 15.6 50.0
–A– – –V/S
525i(480i) 720 x 480i 15.7 59.9 13.5A
– – –R/Y
625i(576i) 720 x 576i 15.6 50.0 13.5 A
– – –R/Y
525p(480p) 720 x 483 31.5 59.9 27.0 A
–3 –D/R/Y
625p(576p) 720 x 57631.350.0 27.0 A
–3 –D/R/Y
11
25(1080)/60i
*11 920 x 1 080i 33.8 60.0 74.3 A–3 –D/R/Y
1125(1080)/50i 1 920 x 1 080i 28.1 50.0 74.3 A
–3 –D/R/Y
1125(1080)/24p 1 920 x 1 080 27.0 24.0 74.3 A
– 3 –D/R/Y
1125(1080)/24sF 1 920 x 1 080i 27.0 24.0 74.3 A
– – –D/R/Y
1125(1080)/25p 1 920 x 1 080 28.1 25.0 74.3 A
– 3 –D/R/Y
1125(1080)/30p 1 920 x 1 080 33.8 30.0 74.3 A
– – –D/R/Y
1125(1080)/60p 1 920 x 1 080 67.5 60.0 148.5A
–3 –D/R/Y
1125(1080)/50p 1 920 x 1 080 56.350.0 148.5 A
–3 –D/R/Y
750 (7 20)/60p 1
 280 x 720 45.0 60.0 74.3 AA*4–3 –D/R/Y
750 (720)/50p 1
 280 x 720 37.5 50.0 74.3 AA*4– 3 –D/R/Y
VGA400 640 x 400 31.5
70.1 25.2 A
– – –D/R
640 x 400 37.9 85.1 31.5 A
– – –D/R
VGA480 640 x 480 31.5 59.9 25.2 A
3 3 3D/R
640 x 480 35.0 66.7 30.2 A
– – –D/R
640 x 480 37.9 72.8 31.5 A
3–3D/R
640 x 480 37.5 75.0 31.5A
3–3D/R
640 x 480 43.3 85.0 36.0 A
– – –D/R
SVGA 800 x 600 35.2
56.3 36.0 A
3–3D/R
800 x 600 37.9 60.3 40.0 A
3–3D/R
800 x 600 48.1 72.2 50.0 A
3–3D/R
800 x 600 46.9 7 5.05
6.3 A3–3D/R
800 x 600 53.7 85.1 56.3 A
– – –D/R
MAC16 832 x 624 49.7 74.6 57.3 A
3–3D/R
XGA 1 024 x 768 39.6 50.0
51.9 AA
*5– – –D/R
1 024 x 768 48.4 60.065.0 AA
*53–3D/R
1 024 x 768 56.570.1 75.0 AA
*53–3D/R
1 024 x 768 60.0 75.0 78.8 AA
*53–3D/R
1 024 x 768 65.581.686.0 AA
*5– – –D/R
1 024 x 768 68.7 85.0 94.5 AA
*5– – –D/R
1 024 x 768 80.0 100.0 105.0 AA
*5– – –D/R
1 024 x 768 96.7 120.0 130.0 AA
*5– – –D/R 
						

							Technical Information
ENGLISH - 103
Appendix
ModeResolution
(Dots) Scanning frequency
Dot
clockfrequency (MHz) Picture 
quality
*3
Plug and play*6
Format*7Horizontal(kHz) Vertical
(Hz) RGB2DVI-D
EDID1 DVI-D
EDID2
MXGA 1
 152 x 864
64.0 71.2 94.2 A– – –D/R
1
 152 x 864 67.574.9 108.0 A– – –D/R
1
 152 x 864 76.7 85.0 121.5 A– – –D/R
MAC21 1
 152 x 87068.7 75.1 100.0 A3–3D/R
1280 x 768 1
 280 x 768 39.6
49.965.3 AA*4– – –D/R
1
 280 x 768 47.8 59.9 79.5AA*4– – –D/R
1280 x 800 1
 280 x 800 41.3
50.068.0 AA*4– – –D/R
1
 280 x 800 49.7 59.8 83.5AA*4– – –D/R
MSXGA 1
 280 x 96060.060.0 108.0 A– – –D/R
SXGA 1
 280 x 1 024
64.0 60.0 108.0 A3–3D/R
1
 280 x 1 024 80.0 75.0 135.0 A3 –3D/R
1
 280 x 1 024 91.1 85.0 157.5 B– – –D/R
SXGA+ 1
 400 x 1 050
65.2 60.0 122.6 A3–3D/R
1
 400 x 1 050 82.2 75.0 155.9 B– – –D/R
WXGA+ 1
 440 x 90055.959.9 106.5 A– – –D/R
UXGA 1
 600 x 1 200 75.0 60.0 162.0 B3–3D/R
WSXGA+ 1
 680 x 1 05065.3 60.0 146.3 A– – –D/R
1920 x 1080
*21 920 x 1 080 66.6 59.9 138.5 A– – –D/R
WUXGA
*21 920 x 1 200 74.0 60.0 154.0 B3–3D/R
*1:  When the 1035/60i signal is input, the signal is displayed as 1080/60i.
*2:  VESA CVT-RB (Reduced Blanking) compatible *3:  Signals that show display picture quality are as follows. 
AA  : Projects the image in the highest picture quality. 
A  : Converts the image in the image processing circuit and projects the im\
age. B  : Samples the image in the image processing circuit and projects the image. 
*4:  Signal A for PT-DX800U. 
*5:  Signal A for PT-DW730U. 
*6:  Signals with a 3 in Plug and play are signals described in the projector's EDID (extend\
ed display identification data). If a signal 
has no 3 in Plug and play but has an entry in the Format column, it can be enter\
ed. For signals without a 3 in Plug and play, 
there are instances that resolution cannot b e selected even though the computer supports them. 
*

7:  Signals that show formats are as follows. 
V: Video S: S-Video
D: DVI-D
R: RGB
Y: YP
BPR
Note
 
z
The number of display dots is 1 280 x 800 for the PT-DW730U and 1 024 x 768 for the PT-DX800U. A signal 
with a different resolution will be projected after converting the resolution to match the projector \
display.
 
z
The  “
i”
 at the end of the resolution indic ates an interlaced signal. 
 
z
W

hen interlaced signals are connected, flicker may occur on the projected image. 
						

							Specifications
104 - ENGLISH
Appendix
The following table describes the specifications of the projector.
Model No. PT-DW730UPT-DW730UL PT-DX800UPT-DX800UL
Power supply AC 120 V 50 Hz/60 Hz
Power consumption 790 W
(When [STANDBY MODE] is set to [ECO]: 0.2 W
When [STANDBY MODE] is set to [NORMAL]: 8 W)
Amps 7.5 A
DLP 
chip Size
0.65" (aspect ratio 16:10) 0.7" (aspect ratio 4:3)
Display system One-unit DLP chip, DLP type
Number of pixels 1 024 000 pixels
(1 280 x 800 dots) 786 432 pixels
(1 024 x 768 dots)
Lens Power zoom
1.8 
to 2.5:1
O
 ptional1.8 to 2.5:1
Optional
Power focus F = 1.7 to 1.9
f = 25.6 mm
 to 35.7 mm F = 1.7 to 1.9
f = 25.6 mm
 to 35.7 mm
Luminous lamp 300 W (maximum of 310 W) UHM lamp x 2
Light output 7 000 lm 
*1 (ANSI)8 000 lm *1 (ANSI)
Applicable
scanning
frequency 
For video 
signals
(including 
S-video) Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For RGB signals Horizontal: 15 kHz to 91 kHz, Vertical: 50 Hz to 8
5 Hz
P

IAS (Panasonic Intelligent Auto Scanning) system
Dot clock frequency150 MHz or less
For DVI-D 
signals 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 
1125(1080)/60p, 1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i, 
1125(1080)/24sF, 1125(1080)/30p, 
1125(1080)/25p, 1125(1080)/24p
 
z
Displayable resolution: VGA to WUXGA (non-interlaced)
 
z
Dot clock frequency: 25 MHz to 162 MHz
 
z
WUXGA signals suppor t only VESA 

CVT-RB (Reduced Blanking) signals. 
For YP
BPR 
signals [525i (480i)] H: 15.75 kHz, V: 60 Hz
[525p (480p)] H: 31.5 kHz, V: 60 Hz
[750 (720)/60p] H: 45 kHz, V: 60 Hz
[1035/60i] H: 33.75 kHz, V: 60 Hz
[1125 (1080)/50i] H: 28.13 kHz, V: 50 Hz
[1125 (1080)/24p] H: 27 kHz, V: 24 Hz[1125 (1080)/30p] H: 33.75 kHz, V: 30 Hz[1125 (1080)/50p] H: 56.25 kHz, V: 50 Hz [625i (576i)] H: 15.63 kHz, V: 50 Hz
[625
p (576p)] H: 31.25 kHz, V:

 50 Hz
[750 (720)/50p] H: 37.5 kHz, V: 50 Hz
[1125 (1080)/60i] H: 33.75 kHz, V: 60 Hz [1125 (1080)/25p] H: 28.13 kHz, V: 25 Hz[1125 (1080)/24sF] H: 27 kHz, V: 48 Hz
[1125 (1080)/60p] H: 67.5 kHz, V: 60 Hz
 
z
SYNC/HD terminals and VD terminals are not supported in 3 value SYNC. 
Color system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Screen size 1.27 m (50") - 15.24 m (600")
*2
Screen aspect ratio
16:104:3
Projection method Front ceiling/front floor/rear ceiling/rear floor
Contrast ratio 2 500:1 
(when [CONTRAST MODE] is set to [HIGH]) 2 000:1 
(when [CONTRAST MODE] is set to [HIGH])
TerminalsRGB1 IN 1 set (BNC x 5)
[RGB SIGNAL] 0.7 V [p-p] 75 
Ω
 (SYNC ON GREEN: 1.0 V [p-p] 75  Ω
)
SYNC/HD, TTL high impedance, automatic positive/negative polarity 
compatible
VD, TTL high impedance, a utomatic positive/negative polarity compatible
[

YP
BPR signal] Y:1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75  Ω
Specifications 
						

							Specifications
ENGLISH - 105
Appendix
Model No. PT-DW730UPT-DW730UL PT-DX800UPT-DX800UL
Terminals
RGB2 IN1 set, high-density D-Sub 15 p (female)
[RGB SIGNAL] 0.7 V [p-p] 75 
Ω
 (SYNC ON GREEN: 1.0 V [p-p] 75  Ω
)
SYNC/HD, TTL high impedance, automatic positive/negative polarity 
compatible
VD, TTL high impedance, automatic positive/negative polarity compatible
[YP
BPR signal] Y:1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75  Ω
VIDE O IN 1
  set, BNC 1.0 V [p-p] 75  Ω
S-VIDEO IN 1 set, Mini DIN 4 p Y 1.0 V [p-p], C 0.286 V [p-p] 75  Ω
 S1 signal compliant
SERIAL IN/OUT D-Sub 9 p, each set, RS-232C compatible, for computer control
REMOTE1 IN/
OUT M3 stereo mini jack, for each remote control (wired) / projector connection control
REMOTE2 IN/
OUT 1 set, D-Sub 9 p (female), for external control (contact control)
DVI-D IN 1 set, DVI-D 24 p, single 
link, DVI1.0 compatible, HDCP 
 compliant
LAN 1 set, RJ-45 for network connection, PJLink compliant, 10Base-T/100Base-TX
Power cable length 3.0 m (118-1/8")
Outer case Molded plastic
Dimensions
Width: 498 mm (19-19/32")
Height: 175 mm (6-7/8")
(feet at a minimum)
Depth: 466 mm (18-11/32")
(including the supplied 
standard zoom lens) Width: 498 mm (19-19/32")
Height: 175 mm (6-7/8")
(feet at a minimum)
Depth: 423 mm 
(1
6-21/32") W
 idth: 498 mm (19-19/32")
Height: 175 mm (6-7/8")
(feet at a minimum)
Depth: 466 mm (18-11/32")
(including the supplied 
standard zoom lens) Width: 498 mm (19-19/32")
Height: 175 mm (6-7/8")
(feet at a minimum)
Depth: 423 mm (1
6-21/32")
WeightApprox. 1 6.3 kg (3 5.9 lbs.)*3 
(including the supplied  standard zoom lens)Approx 15.4 kg (34 lbs.)*3Approx. 1 6.3 kg (3 5.9 lbs.)*3 
(including the supplied  sta ndard zoom lens)Approx 15.4 kg (34 lbs.)*3
Operating environment Operating environment temperature*4: 0
°
C (32 °
F) to 45 °
C (113 °
F)
Operating environment humidity: 20% to 80% (no condensation)
Remote 
control Power supply
DC 3 V (AA/R6 battery x 2)
Operating range Approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight 134 g (4.7 ozs.) (including batteries)
Dimensions Width: 51 mm (2"), H
eight: 176 mm (6-15/16"), Depth: 22.7 mm (29/32")
*

1:  The supplied standard zoom  lens value for PT-DX800U and PT-DW730U. Values vary depending on the lens. Measurement,  measuring conditions and method of notation all comply with ISO21118 international standards. 
*2:  The maximum is 5.08 m (200") when using an ET-DLE055 lens. 
*3:  Average value. Weight varies for each product. *4:  When using the proje ctor at high elevations 1 400 m (4 593 ft) – 2 700 m (8 858 ft) sea level, temperature will be 5 °
C
  (41°
F) 
lower than this higher limit. If the projector is used with the following 2 settings when the ambient temperature reaches 40 °
C 
(104 °
F) (35 °
C (95 °
F) in [HIGH ALTITUDE MODE]) or above, the light output may decrease by 20% to protect\
 the projector. 
–  [LAMP SELECT] is set to [DUAL] in the menu
–  [L AMP 
POWER] is set to [HIGH] in the menu
 
z
The part numbers of accessories and separately sold components are subje\
ct to change without notice.  
						

							Dimensions
106 - ENGLISH
Appendix
Dimensions
 
z
When installing the projector to a ceiling, be sure to use the specified ceiling mount bracket (ET-PKD56H: for 
high ceilings, ET-PKD55S: for low ceilings).
 
z
When installing the projector, attach the drop-prevention kit supplied with the ceiling mount bracket to the 
projector. When you wish to purchase the kit (Product No. TTRA0214), consult your dealer.
 
z
Installation work of the ceiling mount bracket should only be performed by a qualified technician.
 
z
P

anasonic takes no responsibility for any damage to the projector resulti\
ng from use of a ceiling mount bracket 
not manufactured by Panasonic or the inappropriate choice of location fo\
r installation, even if the warranty 
period of the projector has not expired. 
 
z
An unused ceiling mount bracket must be removed promptly by a qualified technician.
 
z
U

se a torque driver or a hex torque driver when tightening the screws and tighten the screws within the 
minimum required tightening torque. Do not use tools such as electric screwdrivers or impact screwdrivers. 
 
z
For details, read the installation manual that comes with with the ceiling mount bracket. 
 
z
The part numbers of accessories and separately sold components are subje\
ct to change without notice. 


M6
Bottom view
Model No. of ceiling mount bracket:  ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
Torque: 4 ± 0.5 N·m 12 mm
Ceiling mount bracket safeguards

5 (3/16)20 (25/32)
21 (13/16)
498  (19-19/32)
77.5 (3-1/16)
155 (6-3/32) 43 (1-11/16) 9 (11/32)
423 (16-21/32)
*  The above dimension is for the models with the standard zoom lens.
*  Actual dimension may differ depending on the product.  
						

							Index
ENGLISH - 107
Appendix
Index
AAccessories œœœœœœœœœœœœœœœ 16
AC IN terminal  œœœœœœœœœœœœ 18, 32
Adjustable feet  œœœœœœœœœœœœœœ 27
ADVANCED MENU  œœœœœœœœœœ 42, 51
AI  œœœœœœœœœœœœœœœœœœœœ 47
Air filter unit  œœœœœœœœœœœœœœœ 89
Air filter unit compartment  œœœœœœœœœ90
ASPECT  œœœœœœœœœœœœœœœœœ 48
 button Remote control  œœœœœœœœœœ 17, 40
ASPECT function  œœœœœœœœœœœœœ 40
AUTO SETUP  œœœœœœœœœœœœœœ 57
 button Projector body  œœœœœœœœœœ 1
9, 39
R

emote control  œœœœœœœœœœ 17, 39
AUTO SETUP function  œœœœœœœœœœ39
AUTO SIGNAL  œœœœœœœœœœœœœœ 57
BBACK COLOR œœœœœœœœœœœœœœ 59
BLANKING  œœœœœœœœœœœœœœœ 51
BRIGHTNESS  œœœœœœœœœœœœœœ 44
CCautions on use œœœœœœœœœœœœœ 15
Cautions when installing  œœœœœœœœœœ12
Cautions when transporting  œœœœœœœœ12
Ceiling mount bracket  œœœœœœœœœœœ 106
Ceiling mount bracket safeguards  œœœœœœ106
CLAMP POSITION  œœœœœœœœœœœœ 52
CLOCK PHAS E œ
œœœœœœœœœœœœ 50
COLOR  œœœœœœœœœœœœœœœœœ 45
COLOR CORRECTION  œœœœœœœœœœ56
COLOR MATCHING  œœœœœœœœœœœ 55
COLOR TEMPERATURE  œœœœœœœœœ45
Connecting the power cord  œœœœœœœœœ32
Connections  œœœœœœœœœœœœœœœ 30
CONTRAST  œœœœœœœœœœœœœœœ 44
CONTRAST MODE  œœœœœœœœœœœœ 56
CONTROL DEVICE SETUP  œœœœœœœœ71
COOLING CONDITION  œœœœœœœœœœ62
DDATE AND TIME œœœœœœœœœœœœœ 65
 button Remote control  œœœœœœœœœœ 17, 41
Deleting entry  signal œ
œœœœœœœœœœ 68
DIGITAL CINEMA REALITY  œœœœœœœœ51
Dimensions  œœœœœœœœœœœœœœœ 106
Direct power off function  œœœœœœœœœœ35
DISPLAY LANGUAGE  œœœœœœœœœ43, 54
DISPLAY OPTION  œœœœœœœœœœ 43, 55
DISPLAY SETTING  œœœœœœœœœœœœ 70
Disposal  œœœœœœœœœœœœœœœœœ 14
 button Projector body  œœœœœœœœœœ 19, 38
Remote control  œœœœœœœœœœ 17, 38
DVI-D INœœœœœœœœœœœœœœœœœ 58
EEDGE BLENDING œœœœœœœœœœœœ 52
 button Projector bo dy œ
œœœœœœœœœœœ 19
Remote control  œœœœœœœœœœœœ 17
FFilter indicator œœœœœœœœœœœœœœ 88
 button Remote control  œœœœœœœœœœ 17, 36
FREEZE  œœœœœœœœœœœœœœœœœ 60
 button Remote control  œœœœœœœœœœ 17, 39
FUNCTION BUTTON  œœœœœœœœœ39, 65
HHIGH ALTITUDE MODE  œœœœœœœœœœ61
I button
Remote control  œœœœœœœœœœ 17, 20
 button
Remote control  œœœœœœœœœœ 17, 20
INITIALIZE  œœœœœœœœœœœœœœœœ 66INPUT RESOLUTION
 œ
œœœœœœœœœœ 52
KKEYSTONE œœœœœœœœœœœœœœœ 50
LLamp indicator œœœœœœœœœœœœœœ 87
LAMP POWER  œœœœœœœœœœœœœœ 63
LAMP RELAY  œœœœœœœœœœœœœœ 63
LAMP SELECT  œœœœœœœœœœœœœœ 62
Lamp unit cover  œœœœœœœœœœœœœ 18
 button Projector body  œœœœœœœœœœ 19, 36
List of compatible signals  œœœœœœœœœ102
LOAD ALL USER DATA  œœœœœœœœœœ66
MMAIN MENU œœœœœœœœœœœœœœœ 42
 switch  œœœœœœœœ18, 34
Maintenance  œœœœœœœœœœœœœœœ 89
 bu tton
P

rojector body  œœœœœœœœœœ 19, 41
Remote control  œœœœœœœœœœ 17, 41
Menu item  œœœœœœœœœœœœœœœœ 42
MENU LOCK  œœœœœœœœœœœœœœœ 71
MENU LOCK PASSWORD  œœœœœœœœœ71
Menu Navigation  œœœœœœœœœœœœœ 41
NNavigating through the menu œœœœœœœœ41
NETWORK  œœœœœœœœœœœœœ 43, 73
Network connections  œœœœœœœœœœœ 74
NETWORK CONTROL  œœœœœœœœœœ73
NETWORK SETUP  œœœœœœœœœœœœ 73
NETWORK STATUS  œœœœœœœœœœœ 73
New registration  œœœœœœœœœœœœœ 68
NOI SE REDUCTION  œ
 œœœœœœœœœœ 46
NO SIGNAL SHUT-OFF  œœœœœœœœœœ65
O button
Remote control  œœœœœœœœœœ 17, 38
ON-SCREEN DISPLAY  œœœœœœœœœœ58
Optional accessories  œœœœœœœœœœœ 16
PPICTURE œœœœœœœœœœœœœœ 42, 44
PICTURE MODE  œœœœœœœœœœœœœ 44
POSITION  œœœœœœœœœœœœœœ 42, 48
Power cord  œœœœœœœœœœœœœœœ 32
Power indicator  œœœœœœœœœœœœ 33, 87
Powering off the projector  œœœœœœœœœ35
Powering up the projector  œœœœœœœœœ34
POWER  ON button
P

rojector body  œœœœœœœœœœœœ 19
Remote control  œœœœœœœœœœœœ 17
Precautions for Use  œœœœœœœœœœœœ 12
Projecting  œœœœœœœœœœœœœœœœ 36
Projection method  œœœœœœœœœœ 21, 61
Projector body  œœœœœœœœœœœœœœ 18
PROJECTOR ID  œœœœœœœœœœœœœ 61
PROJECTOR SETUP  œœœœœœœœœ43, 61
RRASTER POSITION  œœœœœœœœœœœ 53
Read this first!  œœœœœœœœœœœœœœœ 2
REMOTE 1 IN terminal  œœœœœœœœœœ20
REMOTE 2 IN terminal  œœœœœœœœœœ20
REMOTE2 MODE  œœœœœ
œœœœœœœ 6
 4
Remote control  œœœœœœœœœœœœœœ 17
Remote control operations  œœœœœœœœœ38
Removing/attaching the projection lens  œœœ28
Renaming registered signal  œœœœœœœœ68
Replacing the air filter unit  œœœœœœœœœ90
Replacing the lamp unit  œœœœœœœœœœ91
Replacing the unit œœœœœœœœœœœœœ 90
Resetting to the factory default  œœœœœœœ41
 button Projector body  œœœœœœœœœœ 19, 38
Remote control  œœœœœœœœœœ 17, 38
 button
Projector body  œ
 œœœœœœœœœ 19, 38
Remote control  œœœœœœœœœœ 17, 38
RS-232C  œœœœœœœœœœœœœœ 63, 98
SSAVE ALL USER DATA œœœœœœœœœœ65
SCREEN SETTING  œœœœœœœœœœœœ 57
Security  œœœœœœœœœœœœœœœœœ 14
SECURITY  œœœœœœœœœœœœœ 43, 70
SECURITY PASSWORD  œœœœœœœœœ70
SECURITY PASSWORD CHANGE  œœœœœ70
Selecting the input signal  œœœœœœœœœ36
Serial terminal  œœœœœœœœœœœœœœ 98
SERVICE PASSWORD  œœœœœœœœœœ66
Setting Remote control ID numbers  œœ
œœœ 2
0
Setting up  œœœœœœœœœœœœœœœœ 21
SHARPNESS  œœœœœœœœœœœœœœ 46
SHIFT  œœœœœœœœœœœœœœœœœœ 48
 button Remote control  œœœœœœœœœœ 17, 36
 button
Projector body  œœœœœœœœœœœœ 38
Remote control  œœœœœœœœœœ 17, 38
SIDE BY SIDE  œœœœœœœœœœœœ 60, 101
SIGNAL LIST œœœœœœœœœœœœœ 43, 68
Specifications  œœœœœœœœœœœœœœ 104
STANDBY button Projector body  œœœœœœœœœœœœ 19
Remote control  œœœœœœœœœœœœ 17
STANDBY MODE  œœœœœœœœœœœœœ 63
STA
RTUP LOGO  œœœœœœœœœœœœœ 60
STATUS  œœœœœœœœœœœœœœœœœ 64
 button Remote control  œœœœœœœœœœ 17, 38
Sub memory  œœœœœœœœœœœœœœœ 69
 button Projector body  œœœœœœœœœœ 19, 38
Remote control  œœœœœœœœœœ 17, 38
Switching the input signal  œœœœœœœœœ38
SYSTEM DAYLIGHT VIEW  œœœœœœœœ46
SYSTEM SELECTOR  œœœœœœœœœœœ 47
TTemperature indicator œœœœœœœœœœœ 88
TEST PATTERN  œœœœœœœœœœœ 43, 67
 button Remote co ntrol œ
œœœœœœœœœ 17, 39
TEXT CHANGE  œœœœœœœœœœœœœ 71
TINT  œœœœœœœœœœœœœœœœœœ 45
Troubleshooting  œœœœœœœœœœœœœ 93
V button
Projector body  œœœœœœœœœœ 19, 38
Remote control  œœœœœœœœœœ 17, 38
WWHITE GAIN œœœœœœœœœœœœœœœ 46
ZZOOM œœœœœœœœœœœœœœœœœœ 49
 button Remote control  œœœœœœœœœœ 17, 36 
						

							Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for 
the correct method of disposal.
Panasonic Solutions Company
3 Panasonic Way, Secaucus, NJ 07094
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
0ñ1111111
10Á0ä11111111
11
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2011
Environment care information for users in China
This symbol is only valid in china.