Home > Panasonic > Projector > Panasonic Projector Pt D4000e Operating Instructions

Panasonic Projector Pt D4000e Operating Instructions

Here you can view all the pages of manual Panasonic Projector Pt D4000e Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 31

31
OPTION1 settings
ENGLISH
COLOR CORRECTION
OFF : This is the standard setting.
USER : The six colours of red, green, blue, cyan,
magenta and yellow can be adjusted
and registered for each of four signal
systems: Video, S-Video, RGB and
YP
BPR.
Press the ENTER button to make the
detailed settings.
RETURN STORE
SUB MEMORY LIST
   
 
  - : RGB1-XGA60
1: RGB1-XGA60
2: VIDEO-NTSC
3:
4: 
5: 
6: 
7: 
8:
SELECT
CONTRAST MODE
There are two modes for adjusting to the operating
environment.
NORMAL : The...

Page 32

32
OPTION1 settings
DVI EDID
When the projector and external equipment are
connected by DVI connection but a proper image
cannot be obtained, switch this setting.
EDID1
Select this mainly when external equipment
(DVD player, etc.) that outputs movie video
signals is connected to the DVI terminal.
EDID2:PC
Select this mainly when external equipment
(personal computer, etc.) that outputs still
image video signals is connected to the DVI
terminal.
Mode
EDID1
EDID2:PCEDID data
480p, 576p, 1080/60i,...

Page 33

33
ENGLISH
OPTION2 settings
OPTION2
PROJECTOR ID          
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
CHANGE MENU SELECTALL
FRONT-FLOOR
LOW
 HORIZONTAL
DUAL
OFF
SYSTEM INFORMATION
AUTO POWER OFF
DATE AND TIME DISABLE
PASSWORD
PROJECTOR ID
The projector has an ID number setting function
that helps the user to control two or more projectors
either simultaneously or separately with a single
remote control. The ID number is set to “ALL” by
default. Hence the ID number need not be set
when...

Page 34

34
OPTION2 settings
LAMP SELECT
“LAMP SELECT” is used to choose from “SINGLE”
and “DUAL” modes depending on user’s needs or
viewing conditions. 
In “SINGLE” mode, the projector may automatically
select either lamp from the 2 lamps, or the
particular lamp can be specified.
DUAL : Two lamps are used simultaneously.
SINGLE : 
One of either lamps is used (lamp with shorter
operating hours is automatically selected).
LAMP1 : Lamp Unit 1 is always used.
LAMP2 : Lamp Unit 2 is always used.
When one of the above...

Page 35

35
ENGLISH
Displaying the internal test pattern
SYSTEM INFORMATION
The projector’s system information can be viewed.
SYSTEM INFORMATION
MAIN VERSION
NETWORK VERSION
PROJECTOR RUNTIME
LAMP1
LAMP2
LAMP1 ON
RETURN LAMP2 ON1.00.00
1.00      300h
100h
100h
20
20
AUTO POWER OFF
The projector can be automatically set to the
standby mode if no signals are input for the set
duration.
DISABLE: 
This is the standard setting. This function is set
to OFF.
45MIN. – 90MIN.: 
The duration can be set in 15-minute...

Page 36

36
Setting the network
The settings required for the network must be
established in order to use the Web browser (page 37)
functions that the PC uses to control the projector.
HOST NAME : 
Make alteration if necessary
when to use the DHCP server.
The number of valid characters
is 1 to 12 characters (spaces
not allowed).
DHCP : Set the DHCP item to ON when to
acquire an IP address automatically
using the DHCP server.
Set to OFF if DHCP server is
not used.
IP ADDRESS : Enter the IP address if DHCP
server...

Page 37

37
ENGLISH
Using Web Browser Control 
Accessing from the Web browser
Start the Web browser on your PC, then
enter the IP address which was set in
the projector.
Enter “user1” in the user name field,
then enter the password in the
password field.
The default setting is “panasonic” (all lower case). If
you have changed the password, enter the new
password here. 
The host name set in the projector is displayed in
the “Realm” field.
Click [OK]. 
The Basic Control page is displayed.
Password change page
Click...

Page 38

38
Using Web Browser Control 
Basic control page
This page is the first page displayed when the projector is accessed through a Web browser.
To move from another page, click [Projector control], then [Basic control]. 
Power On/Off control 
Shutter control
Network set up button
Click this item, and a network set up page for IP address and
other items appear.
Change password button
Signal System Switching
Control button
Click this item, and a projector control
page appears.
E-mail set up button
Click this...

Page 39

39
ENGLISH
Detail control page
Click [Projector control], then [Detail control] to display the Detail control page.
Pressing these buttons controls the projector and updates the on-screen
description on the right of the control page when control is finished.
This button updates the on-screen
description on the right of the control
page with the latest information.
On-screen status is displayed, even if
the on-screen of projector is set to off.
Monitor information page
Click [Projector control], then...

Page 40

40
Using Web Browser Control 
When [FAILED] has appeared for an item
Parameter
MAIN CPU BUS
FAN
OPTICS MODULE
TEMPERATURE
INPUT AIR TEMPERATURE
AROUND LAMP
TEMPERATURE
LAMP REMAIN TIME
LAMP STATUS
SHUTTER
AIR FILTER
OPTICS MODULE TEMP.SENSOR
INPUT AIR TEMP.SENSOR
AROUND LAMP 
TEMP. SENSOR
BATTERY
AIRFLOW SENSOR
COLOR WHEEL
COVER OPEN
Description
Trouble has occurred in the microcomputer circuitry. Consult your dealer.
Trouble has occurred in the fan or its drive circuit. Consult your dealer.
The...
Start reading Panasonic Projector Pt D4000e Operating Instructions

Related Manuals for Panasonic Projector Pt D4000e Operating Instructions

All Panasonic manuals